I am starting a build of a Goldberg Gentle Lady glider that I am going to put a brushless motor in the nose and make it into a motor glider.

Plans are for a Headup Rc 2836-11 brushless motor with a 10x6 Folding prop running a 1.5" spinner, with a 30 amp Mystery ESC and 1200 MAH 3S 20C LIPO. At least from the specs on the website the components should be a good match for this application.

Also on this build I am trying to do as much as I can with Titebond wood glue over CA due to allergies with CA

Here is the start of the build so far I have the tail feathers almost finished just need some more sanding, only issue I had was I couldn't find the gussets for the tail so I made my own.