HobbyKing.com New Products Flash Sale
Closed Thread
Thread Tools
This thread is privately moderated by S.R.G., who may elect to delete unwanted replies.
Old Mar 22, 2011, 12:00 AM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
Sold
Parkzone Sukhoi XP, Sukhoi Parts, and UM Brushless Kit

Ok guys, I was going to convert one of my UM to brushless cause I figured the stock motors would not handle CF wings and tail setup. I was wrong, they can

So, what I have is the following:

AP05
XP3A
connector wire for 3A ESC w/JST connector

I paid $30 and waited 3 weeks for this setup. All items are brand new and unopened. Willing to sell for $30 + shipping.
SOLD

---

I am also selling an UM Sukhoi XP. Why is this? I was going to make a CF wing and tail for this baby, but then I made a UM P-51 wing I was amazed by my amateur/beginner abilities to make a nice product (nice in my eyes )...So then went out and bought a Jpower 50mm F-16 and moving to make it out of CF Plus, these little planes are hard to fly for me! So, I have a like new Sukhoi XP BNF here...as well as a spare body and tail setup. Just lmk if interested. $75 + shipping.

---

I also have a BRAND NEW Sukhoi fuselage and tail.

$24 + shipping - Sukhoi bare fuselage
$8 + shipping - Sukhoi wing assembly

---

I have feedback here, on RCU, on ASF, and on eBay

Let me know if you need more pictures than those below.

Thanks,
Sam
S.R.G. is offline Find More Posts by S.R.G.
Last edited by S.R.G.; Mar 23, 2011 at 02:28 AM.
Sign up now
to remove ads between posts
Old Mar 22, 2011, 12:19 AM
Registered User
brandonb5269's Avatar
United States, MI, Macomb
Joined Jan 2009
68 Posts
Trader Rating: 7
how much you lookign to get for the sukhoi?
brandonb5269 is offline Find More Posts by brandonb5269
Old Mar 22, 2011, 12:28 AM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
$75 + shipping - Sukhoi XP + charger + 1 stock battery
$24 + shipping - Sukhoi bare fuselage
$8 + shipping - Sukhoi wing assembly

Shipping = USPS OR UPS...you selection

And I am looking for 50mm EDF, bagging materials (bags, breather, etc), resin, CF/Kevlar, and Blade CX2/120 SR just to let people know Help fund my build projects please!
S.R.G. is offline Find More Posts by S.R.G.
Last edited by S.R.G.; Mar 22, 2011 at 11:23 PM.
Old Mar 22, 2011, 04:01 PM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
I am willing to entertain legitimate offers The worst I can say is no thank you

I AM ALSO INTERESTED IN TRADES FOR A BLADE CX2 or CX3
S.R.G. is offline Find More Posts by S.R.G.
Last edited by S.R.G.; Mar 22, 2011 at 10:06 PM.
Old Mar 22, 2011, 11:22 PM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
Here are some pictures. This stuff needs to be sold! Buy it off of me and support my CF builds!

Last picture is of my "idk why I have it but I do" desk (besides the CF) See something you want/like (RC) let me know! Notice the CF P-51 wing there


O...and prices LOWERED!

----
----







S.R.G. is offline Find More Posts by S.R.G.
Last edited by S.R.G.; Mar 23, 2011 at 01:02 PM.
Old Mar 23, 2011, 12:33 AM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
Information for the motor:

Kv: 3000rpm/v
Lipo Range: 1~2S (3.7~7.4V)
Max current: 3A
Burst current (5sec): 4A
Weight: 5.4g (including mount and wire)
Shaft: 1.5mm
Shaft length: 14mm
Dimensions : 14 x 13mm

Information for the ESC:

Cont. Current: 3A
Burst Current: 4A
Max Voltage: 4.2v
BEC: Not required. power supplied directly from 1S battery.
Programable: Yes
Weight: 0.7g
Dimensions: 11x13x8mm

I ALSO have a prop adapter for the motor from Radical RC (they were on backorder). This is the exact same setup you can find on RCG for brushless conversions of the Parkzone series (P-51, Sukhoi, Trojan, etc).
S.R.G. is offline Find More Posts by S.R.G.
Old Mar 23, 2011, 12:40 AM
kill your idols
ZEROSKIN76's Avatar
utica new york
Joined May 2009
1,819 Posts
Trader Rating: 103
the esc has harness for those 150 mah cels?

also does it have conector for regular rx or one of those micro connectors?
i dont have any with that type of conection

maybe a pic of the esc motor setup from above so i can see items

sorry not trying to annoy
ZEROSKIN76 is offline Find More Posts by ZEROSKIN76
Old Mar 23, 2011, 12:49 AM
kill your idols
ZEROSKIN76's Avatar
utica new york
Joined May 2009
1,819 Posts
Trader Rating: 103
how much for the esc motor combo and a single cell charger with wall jack?
ZEROSKIN76 is offline Find More Posts by ZEROSKIN76
Old Mar 23, 2011, 12:55 AM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
Selling the ESC, motor, and jst cord for $30 + shipping.

And I see you noticed the last picture Do I have a cord on the desk? haha I think I have some Netgear 12v 1 a plugs I use with my EDF charger. Anyways, $15 + shipping.
S.R.G. is offline Find More Posts by S.R.G.
Old Mar 23, 2011, 01:46 AM
kill your idols
ZEROSKIN76's Avatar
utica new york
Joined May 2009
1,819 Posts
Trader Rating: 103
so that charger actualy runs of the netgear transformer if so ill take that setup and the motor combo, just dont wanna charge battery from battery
ZEROSKIN76 is offline Find More Posts by ZEROSKIN76
Old Mar 23, 2011, 01:51 AM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
I would have to try it and see I think they may be 6 volt 1-1.5 amp input Let me look them up.

Nope, won't work They require a 6 v 1.5 amp. I may have one around here.

If not just want the motor setup?
S.R.G. is offline Find More Posts by S.R.G.
Old Mar 23, 2011, 01:54 AM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
Nope, no plug...and oddly I have nearly everything but that range...had a 6v 500 ma, 5 v 1 a, and even a 13.5 v 1 a! Why do I have so much stuff? (*not intended to be answered )
S.R.G. is offline Find More Posts by S.R.G.
Old Mar 23, 2011, 02:08 AM
kill your idols
ZEROSKIN76's Avatar
utica new york
Joined May 2009
1,819 Posts
Trader Rating: 103
a stocked work bence is sign of genius

il take the motor combo pm your paypal and write for mini esc motor combo in the line as well as agreed upon price and ill send in the am
ZEROSKIN76 is offline Find More Posts by ZEROSKIN76
Old Mar 23, 2011, 02:12 AM
I'm a Mac ;)
S.R.G.'s Avatar
United States, AR
Joined May 2010
554 Posts
Trader Rating: 25
Haha But a stock workbench of items randomly purchased that you will never use? Lets see...the Sukhoi, extra body parts, EDF motor/fan...and an iPod? wth

Anyways, what shall that shipping address be? (PM me good sir ) No shipping quote necessary if you are good with USPS Priority for $5. Otherwise good ole address for quote.

And I send invoices with the total and everything worked up. Of course, we can waive the fee if you just want to send it as a gift. We have done business before And good experience
S.R.G. is offline Find More Posts by S.R.G.
Closed Thread

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Parts: AR6400, SPMAS2000, AP05 motor, XP3A, Props, TX TMASTER Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 1 Sep 20, 2011 04:31 AM
Wanted UM Airframes (Sukhoi / Sukhoi XP / Mustang / ETC) For ar6400lbl brick conversion perschek Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 8 Mar 09, 2011 01:06 PM
For Sale TRADE: Sukhoi XP for UM T-28 SoupInMyCoupe Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 2 Feb 14, 2011 05:27 PM
Sold PZ UM Cub, Night Vapor, Sukhoi XP and HobbyZone Champ tonebone Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 6 Nov 15, 2010 06:10 PM
Discussion Axis v4 with UM Sukhoi XP guts signflyer Scratchbuilt Indoor and Micro Models 1 Aug 02, 2010 10:09 PM