Up for sale is my Belt CP RTF helicopter. I've recently went on to bigger helis and would like to focus on flying them, so this one is up for sale. It's an E-sky Belt CP with a whole bunch of replacement parts, upgrades and extras. I recently upgraded the head and tail to metal CNC, but I haven't set the pitch of the blades (which you'd get a 3 pair). I've hovered and flown it a few times, but since I just replaced the head, a few adjustments will be needed.

Here is what you get:

Belt CP with purple CNC head and tail built with the following:
Esky ET6I 2.4Ghz radio with 6 channel RX
3 Hextronic HXT900 Servos for everything (cyclic & tail
30A Cyclone ESC
White canopy
E-sky EKS-0704B Gyro
Stock E-sky motor, brushless
E-Esky wooden 315mm blades (need replacing, but you get two new pairs, see below)
Black E-sky plastic flybar paddles
Carbon horizontal stabilizer
black plastic tail blades
white vertical stabilizer
E-sky 1800mah 11.1v 3 cell lipo with Deans plugs and a Walkera 2-3 cell charger
Owner's manual

Extra stuff that comes with the heli (so much that you could almost build another heli!)

2 extra heads, plastic
1 extra plastic frame
1 pair of Align 315mm Pro white/red blades (new out of box)
1 paif of Align 315mm carbon blades new in package (HS1160T)
1 extra pair of white paddles in "ok" condition
1 extra pair of white tail blades in "ok" condition
1 extra set of main gear (EK1-0534) and one with just one upper gear
3 extra controlling shaft sets (EK1-0521)
1 feathering shaft set (EK1-0404)
1 feathering shaft, Microheli part number MH-HK077
2 blade holders, new
1 tail boom set (EK1-0535)
3 extra tail booms without holders
1 extra flybar, slightly bent but can be straightened
1 extra horizontal stabilizer, white
1 extra main blade housing (EK1-0517)
1 extra 12T motor pinion Xtreme production part number EA-015-12T
3 extra main shafts
original plastic tail housing
a few more feathering shafts
A "Bag O' Parts, including extra screws, washers, half set of landing brackets, controlling rods, enough parts total to rebuild this heli after a few crashes.











This is a used heli with a lot of new parts both on and off it, so it will need to be tweaked especially since the head and tail were upgraded. This is a perfect 1st CP heli for someone, as it includes enough parts to rebuild more than twice over and after crashes.

$180 with free shipping to your door or trade for a decent 7 channel TX with RX 2.4Ghz, I accept PayPal only.

I have a few trader ratings here and more than enough positive feedback on heatware under Kwincy:

http://heatware.com/eval.php?id=39222

Lowered the price a bit.

Still available!

Still available with a lower price!

Buy this Belt CP!

Lowered the price and now offering free shipping!

This is a nice 400 heli with al lot of spares!

I'm interested. How would this fare for a first CP and future growth?

Thanks!