Flyduino Mega , a Multiwii/Ardupirates/Aeroquad based aerial video platform FC - Page 22

Tahoe Ed · Apr 08, 2011, 04:23 PM

Paul, here is a link that might help.

http://66.163.168.225/babelfish/tran...c-17895-1.html

English translation.

Tahoe Ed · Apr 08, 2011, 04:24 PM

Quote:

Originally Posted by Goofy23

Does he needs 3.3V, i think so but also no problem as there is a free 3.3V regulator waitng for your satelite on the flyduino.

Requires 5v.

Goofy23 · Apr 08, 2011, 06:33 PM

i will have a closer look on it, be sure but. its very late here now and i have lots of work on my desk.
But many thanks for the link i think it will clear something up.

I am a bit embrassed the translation sounds like a german guy like me, i can understand it well, the first time i understand a automatic translation well.
It may caused by my bad english, its exactly as bad as a auto translate

Goofy23 · Apr 08, 2011, 06:43 PM

If it requires 5V, no problem they are also there at the serial outs and also a GND connection for them.
Its a bit hard to see for me cause i dont know the MK that good.
But i am pretty sure this baby needs a seriaqlin, and i have plenty of them, its more a code thing.

Tahoe Ed · Apr 08, 2011, 07:45 PM

Quote:

Originally Posted by Goofy23

i will have a closer look on it, be sure but. its very late here now and i have lots of work on my desk.
But many thanks for the link i think it will clear something up.

I am a bit embrassed the translation sounds like a german guy like me, i can understand it well, the first time i understand a automatic translation well.
It may caused by my bad english, its exactly as bad as a auto translate

The translation program leaves something to be desired. You on the other hand do well. One example that comes to mind is "intestine" rather than "instead". There are many more. My German is just good enough to get me a beer and find the restroom. When I was in college, what else did we need.

rimshotcopter · Apr 08, 2011, 07:55 PM

Quote:

Originally Posted by Tahoe Ed

The translation program leaves something to be desired. You on the other hand do well. One example that comes to mind is "intestine" rather than "instead". There are many more. My German is just good enough to get me a beer and find the restroom. When I was in college, what else did we need.

How about asking a Dame for a date? LOL

Tahoe Ed · Apr 08, 2011, 08:00 PM

Quote:

Originally Posted by reverendrichie

How about asking a Dame for a date? LOL

This was the time of women's liberation, they asked us out.

Goofy23 · Apr 08, 2011, 08:16 PM

Should have been a nice time, damm the things have changed

Geni · Apr 09, 2011, 02:29 AM

Quote:

Originally Posted by Tahoe Ed

Paul, here is a link that might help.

http://66.163.168.225/babelfish/tran...c-17895-1.html

English translation.

Hier Original German: http://forum.mikrokopter.de/topic-po...tml#post227187

Goofy23 · Apr 09, 2011, 09:32 AM

I am pretty sure the RXD2 and RXD3 would work for that.

You can get the 5V and the GND on the same header, but the code have to be edited acordingly.

Goofy23 · 11:02 PM

To complete the Flyduino i did a Power distribution board and a Sensor BOB with integrated LLC for it.

Top of the BOB for the FFIMU from Jussi

Bottom of the BOB for WMP+ and BMA020

All in the 5x5cm style to have a nice Stack.
A GPS BOB 5x5cm style will follow, to give a nice top of the stack.
Also working on some Video RX and TX module bobs, but those wont be 5x5cm, cause it may make more sense to put elsewhere on the copter, what do you think?

braindead4554 · Apr 10, 2011, 02:10 AM

Quote:

Originally Posted by Goofy23

To complete the Flyduino i did a Power distribution board and a Sensor BOB with integrated LLC for it.

Top of the BOB for the FFIMU from Jussi

Bottom of the BOB for WMP+ and BMA020

All in the 5x5cm style to have a nice Stack.
A GPS BOB 5x5cm style will follow, to give a nice top of the stack.
Also working on some Video RX and TX module bobs, but those wont be 5x5cm, cause it may make more sense to put elsewhere on the copter, what do you think?

WOW!! now I'm really itching to try it out! I need a Flyduino

kinderkram · Apr 10, 2011, 03:52 AM

Got some info on the availability & pricing?

Goofy23 · Apr 10, 2011, 04:26 PM

I am still working on the GPS bob before i will order them.
The needs of the FMP04 module are a bit special, i will integrate voltage regulators, llc and buffer, so it will be a bit more then a simple bob.

Goofy23 · Apr 11, 2011, 05:10 PM

i dont think the
FMP04 GPS module Breakout Board from oharap will suits our needs.
Its missing some esential parts to get it working in the arduino 5V enviromet, and i think it needs a buffered power source, so you dont have to wait mabe several minutes till he finds his satelites again after each lipo change.
I got everything prepared for the GPS bob, will take another day to complete the layout.

The price for the Flydubution will be 6€ for the naked board plus 5€ for a complete set of connectors, male and female, enough for a octo, will cost you another 5€.

The Flydusense will cost also 6€ for the naked board plus 3€ for allready soldered LLC and pullups on it.

The GPS BOB will be in the same range, but it have more parts on it and i have to deliver a special jst plug with it (allready colletcing quotes for it). So maybe for a complete GPS kit execpt the GPS module itself 12€

The production run of the flyduino is started!!
I really have a problem with the weak dollar atm, i am living in euro world, so i have to change the prices to euro, cant pay my bills otherwise.
Also working on a simple shop for all this items, but i think this shop will be in euro only.
I hope i have more news soon.

Apr 09, 2011, 10:42 PM	#326
Goofy23 Registered User Hamburg, Germany Joined Jan 2011 1,074 Posts	To complete the Flyduino i did a Power distribution board and a Sensor BOB with integrated LLC for it. Top of the BOB for the FFIMU from Jussi Bottom of the BOB for WMP+ and BMA020 All in the 5x5cm style to have a nice Stack. A GPS BOB 5x5cm style will follow, to give a nice top of the stack. Also working on some Video RX and TX module bobs, but those wont be 5x5cm, cause it may make more sense to put elsewhere on the copter, what do you think?
	Last edited by Goofy23; Apr 09, 2011 at 11:02 PM.

Apr 10, 2011, 03:52 AM	#328
kinderkram AutoQuad Team Germany, NRW, Dusseldorf Joined Jun 2010 4,705 Posts	Interesting BOBs, Paul! Got some info on the availability & pricing?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Product Please let me introduce myself	jimaquo	Dock Talk	7	Oct 27, 2010 02:27 AM
Let me introduce the DEMON!!!! (Transparent covering and eliptical wing!!!)	modest-master	Sport Planes	7	Aug 25, 2002 11:46 PM
Let me introduce Angelis 280/400, Benjamin, Zombi (ARFs)	modest-master	Parkflyers	17	Mar 14, 2002 01:20 PM
Let me introduce the "NIKE"	modest-master	Electric Sailplanes	3	Mar 07, 2002 05:20 AM

RCG Sites

About RCG

Features

Tools

Media

Topics

Apr 08, 2011, 04:23 PM	#316
Tahoe Ed Fly High - Lake Tahoe Las Vegas/Lake Tahoe Joined Feb 2010 4,712 Posts	Paul, here is a link that might help. http://66.163.168.225/babelfish/tran...c-17895-1.html English translation.

Apr 08, 2011, 06:33 PM	#318
Goofy23 Registered User Hamburg, Germany Joined Jan 2011 1,074 Posts	i will have a closer look on it, be sure but. its very late here now and i have lots of work on my desk. But many thanks for the link i think it will clear something up. I am a bit embrassed the translation sounds like a german guy like me, i can understand it well, the first time i understand a automatic translation well. It may caused by my bad english, its exactly as bad as a auto translate

Apr 08, 2011, 06:43 PM	#319
Goofy23 Registered User Hamburg, Germany Joined Jan 2011 1,074 Posts	If it requires 5V, no problem they are also there at the serial outs and also a GND connection for them. Its a bit hard to see for me cause i dont know the MK that good. But i am pretty sure this baby needs a seriaqlin, and i have plenty of them, its more a code thing.

Apr 08, 2011, 08:16 PM	#323
Goofy23 Registered User Hamburg, Germany Joined Jan 2011 1,074 Posts	Should have been a nice time, damm the things have changed

Apr 09, 2011, 09:32 AM	#325
Goofy23 Registered User Hamburg, Germany Joined Jan 2011 1,074 Posts	I am pretty sure the RXD2 and RXD3 would work for that. You can get the 5V and the GND on the same header, but the code have to be edited acordingly.

Apr 10, 2011, 04:26 PM	#329
Goofy23 Registered User Hamburg, Germany Joined Jan 2011 1,074 Posts	I am still working on the GPS bob before i will order them. The needs of the FMP04 module are a bit special, i will integrate voltage regulators, llc and buffer, so it will be a bit more then a simple bob.

Apr 11, 2011, 05:10 PM	#330
Goofy23 Registered User Hamburg, Germany Joined Jan 2011 1,074 Posts	i dont think the FMP04 GPS module Breakout Board from oharap will suits our needs. Its missing some esential parts to get it working in the arduino 5V enviromet, and i think it needs a buffered power source, so you dont have to wait mabe several minutes till he finds his satelites again after each lipo change. I got everything prepared for the GPS bob, will take another day to complete the layout. The price for the Flydubution will be 6€ for the naked board plus 5€ for a complete set of connectors, male and female, enough for a octo, will cost you another 5€. The Flydusense will cost also 6€ for the naked board plus 3€ for allready soldered LLC and pullups on it. The GPS BOB will be in the same range, but it have more parts on it and i have to deliver a special jst plug with it (allready colletcing quotes for it). So maybe for a complete GPS kit execpt the GPS module itself 12€ The production run of the flyduino is started!! I really have a problem with the weak dollar atm, i am living in euro world, so i have to change the prices to euro, cant pay my bills otherwise. Also working on a simple shop for all this items, but i think this shop will be in euro only. I hope i have more news soon.