Hi Paul, i have linked your shop at my friends and you have sold 4 flyduino for now at my friends plus mine 2

And we waiting GPS Black bob

Paul, please don't change the BLACK design, we love it

I am very happy with your board, any news about aeroquad on flyduino?

For Italian people i have open a thread HERE if you need help.

Hi Paul

I finally got the drawings ready for version 1.8

The MultiWii version should be ok, can you just check on the PPM serial input?



I would be happy that you can confirm that above is correct.

I noticed Oleg made a quick drawing for the Megapirate so I've adapted the Flyduino diagram from the MultiWii.
I'm posting that one in the MegaPirate thread to verify.

Best regards.
B.

Originally Posted by jonnypaletta

Paul, please don't change the BLACK design, we love it

he will get problems with me when he try to change the color

Warthox... i preferred your hold avatar

Hi,

Already showed it in another topic and black arms looks amazing.

Paul, what about you add some optional 1mm extra plates without power distribution in your store?

rgon, i have them allready?
http://www.flyduino.com/product_info...warz-matt.html

Originally Posted by berkely

Hi Paul

I finally got the drawings ready for version 1.8

The MultiWii version should be ok, can you just check on the PPM serial input?



I would be happy that you can confirm that above is correct.

I noticed Oleg made a quick drawing for the Megapirate so I've adapted the Flyduino diagram from the MultiWii.
I'm posting that one in the MegaPirate thread to verify.

Best regards.
B.

FANTASTIC !
the shematic shows very good the powering options.
PPM is correct, only thing i saw, cam gimbal are wrong, at least for the 1.8.
Alex supports now the 44-46 pins for the gimbal.
Many Thanks
https://spreadsheets0.google.com/pub...EE&output=html

And may the FTDI should be a bit higher, i looks a bit like its the I2C row.

Originally Posted by jonnypaletta

Hi Paul, i have linked your shop at my friends and you have sold 4 flyduino for now at my friends plus mine 2

And we waiting GPS Black bob

Paul, please don't change the BLACK design, we love it

I am very happy with your board, any news about aeroquad on flyduino?

For Italian people i have open a thread HERE if you need help.

Also many Thanks, you guys keep me pretty busy atm
Still have to burn bootloaders tomost of the Flyduinos, afterward i will stock them again in the shop.

All shippings i can fullfill are out, also the ones who waiting for their Flyduinos are prepared.
A few guys will get a delivery with missing MWC board, this will be delivered in a socond delivery,sry, but it will be here soon.


Arms will be in shop later, oh one note, all orders are prepared or shipped i cant add any arms to a allready done delivery.

There is another promissing gps module, will get one soon we will see.
The technical specs are promissing, as a magnetometer can be combined, also there will be several firmware updates this year for it and with abugsnightmare
we have someone who can care for the little GPS, (thanks Jörg).
A sample is on the way to me, hope to get the time soon to test it, will be abit tricky as i have special bob for it, but should be doable.
Otherwise the FMP04 is a sure thing, but a combined one which support different modules will may make sense.

Wait, wait, wait. What? Does this (the new drawing) mean, that I can connect a Spektrum satellite directly to the Board? And which software do I need? MWC or Ardupirates?

Originally Posted by Goofy23

ok flye we find a solution, but i think a new one shouldnt behave different, we will check.
But technically the flyduino should behave like a pro mine and vice versa.
Its really hard to get a relation between the beahviour and a technical explanation.
But i know some configs behave strange and i am also always happy when i find a good working one.
But this sounds abit like a enabled baro, dont know, New ones will take a bit, but we check that.

Hi Paul,I have made another set up with other esc and it was flying nearly good so I tried a short fpv flight and suddenly the quad slow down and with full throttle came to ground and all that in a short time so I lost my quad in a field and me and a friend have searched with a vtt and never find it so it's $700 lost!

Originally Posted by Goofy23

FANTASTIC !
the shematic shows very good the powering options.
PPM is correct, only thing i saw, cam gimbal are wrong, at least for the 1.8.
Alex supports now the 44-46 pins for the gimbal.
Many Thanks
https://spreadsheets0.google.com/pub...EE&output=html

And may the FTDI should be a bit higher, i looks a bit like its the I2C row.

Sure, 100% correct!

Placed FTDI higher, actually above the servo pins where they should have been & corrected the servo pins.



Do not hesitate if you want to see something changed!

The Mega diagram has also been updated so the image on your first post is also.

Enjoy

Regards

Thx for your great work, berkely!

Your diagrams make any docu complete!

Originally Posted by kinderkram

Thx for your great work, berkely!

Your diagrams make any docu complete!

+1

this diagrams are very helpful.

Great work Berkely, thanks.
Very good to see, only thing may missing is the I2C row, what do you think.
Oh and after you cleared the things so well.
I will give a little confusion, i skiped the D37 on Flyduino 2.1 and put a 3.3V in place of the D37, so we have the 3.3V also on the I2C.

Originally Posted by flye

hi paul,i have made another set up with other esc and it was flying nearly good so i tried a short fpv flight and suddenly the quad slow down and with full throttle came to ground and all that in a short time so i lost my quad in a field and me and a friend have searched with a vtt and never find it so it's $700 lost!

i have build another one with a promini and my second ffimu and it fly very well and i wonder if your board would fly as well