HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jan 23, 2012, 12:51 PM
Registered User
Joined Jan 2012
36 Posts
All is good it is working now!! Too bad snow is on the ground right now!!
mehere is offline Find More Posts by mehere
Reply With Quote
Sign up now
to remove ads between posts
Old Jan 23, 2012, 07:32 PM
Texas NewB
Black_heart's Avatar
United States, MD, Princess Anne
Joined Dec 2011
949 Posts
What did you find wrong?
Black_heart is online now Find More Posts by Black_heart
Reply With Quote
Old Jan 23, 2012, 08:45 PM
Registered User
Joined Jan 2012
36 Posts
Pulled off the rx and unplugged and replugged connections. One must have come loose when I unboxed it..............took first flight got it in the air didn't fly real smooth when I landed it went tail down and I broke the tail fin at least I started with an inexpensive part: }

After bringing in the house I see the swash plate needs to be leveled, I thought I had checked it before when tighening the screw's is this something that could have happend during flight?

At least I got in my first three minute flight :}

Also when throttle and trim are all the way down I have slight rotation should I put a negative number in the first slot on throttle curve?
mehere is offline Find More Posts by mehere
Reply With Quote
Old Jan 23, 2012, 09:23 PM
Texas NewB
Black_heart's Avatar
United States, MD, Princess Anne
Joined Dec 2011
949 Posts
No this should be 0 I beleave there is a error in eather the ESC or radio but you need to plug in the heli with throttle lock off If i remember the ESC well not allow the motor to start tell it see's 0 throttle But after you plug it in and it is ready to fly then you can hit throttle lock.

I found this out the hard Was as I was alittle to close when I took it out of lock once :0.
Black_heart is online now Find More Posts by Black_heart
Reply With Quote
Old Jan 23, 2012, 09:55 PM
Registered User
Joined Jan 2012
36 Posts
OK thanks!
mehere is offline Find More Posts by mehere
Reply With Quote
Old Jan 25, 2012, 06:13 PM
Registered User
Joined Jan 2012
36 Posts
Does anybody have some good easy starter settings for the T-6A, I need some settings that aren't quite so touchy!

Thanks
mehere is offline Find More Posts by mehere
Reply With Quote
Old Jan 25, 2012, 09:49 PM
Texas NewB
Black_heart's Avatar
United States, MD, Princess Anne
Joined Dec 2011
949 Posts
here is a nice one
Black_heart is online now Find More Posts by Black_heart
Reply With Quote
Old Jan 25, 2012, 10:00 PM
Registered User
Joined Jan 2012
36 Posts
Thanks I will try it!
mehere is offline Find More Posts by mehere
Reply With Quote
Old Jan 27, 2012, 07:19 AM
Registered User
Joined Jan 2012
36 Posts
This helicopter may have come ready to fly but I sure didn't, I am getting better every day though. The quality of this helicopter to price ratio is fantastic!
mehere is offline Find More Posts by mehere
Reply With Quote
Old Jan 28, 2012, 06:19 PM
Registered User
Joined Jan 2012
36 Posts
How you doing on your flybarless?
mehere is offline Find More Posts by mehere
Reply With Quote
Old Jan 28, 2012, 06:25 PM
Texas NewB
Black_heart's Avatar
United States, MD, Princess Anne
Joined Dec 2011
949 Posts
I am waiting on a New tail rotor as I found my shaft was bent and needed to be replace which gave me the chance to get a new cnc one.
Black_heart is online now Find More Posts by Black_heart
Reply With Quote
Old Jan 29, 2012, 12:19 PM
Registered User
Joined Jan 2012
36 Posts
Where do you order your parts from?
mehere is offline Find More Posts by mehere
Reply With Quote
Old Jan 29, 2012, 01:02 PM
Texas NewB
Black_heart's Avatar
United States, MD, Princess Anne
Joined Dec 2011
949 Posts
I get them from eather Ebay or LHS.
I have like 8-9 LHS around here and most are getting to know me pretty well
this is the tail I found
http://www.auctiva.com/hostedimages/...ats=0&format=0
$15.65 and free shipping
Black_heart is online now Find More Posts by Black_heart
Reply With Quote
Old Jan 29, 2012, 05:39 PM
Registered User
Joined Jan 2012
36 Posts
My local shop is getting to know me also, however they have limited supplies and I seem to be going through them quite fast :} hobbypartz seems to be pretty good and have been shipping items pretty fast to me!
mehere is offline Find More Posts by mehere
Reply With Quote
Old Jan 30, 2012, 06:33 PM
Registered User
Joined Jan 2012
36 Posts
I broke my tail boom and went to the LHS picket up a tail boom for a trex 450 but now the belt is too long. Do I need to replace with a trex 450 belt?
mehere is offline Find More Posts by mehere
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Mini-Review Cermark Hausler 450 SE V2 koppterX 3D Electric Heli Flying 395 Sep 06, 2014 03:27 PM
Sold hausler 450 rtf heli new in box dennishobbies Aircraft - Electric - Helis (FS/W) 22 Jun 02, 2012 04:12 PM
New Product hausler 450 rtf heli dennishobbies Hot Online Deals 8 Jan 30, 2011 08:48 PM
Sold FS: RTF Align Trex 450 V2, DX7 OCFly Aircraft - Electric - Helis (FS/W) 2 Jan 10, 2011 12:24 PM
Off Site Align T-Rex 450 SE V2 Complete RTF RC Helicopter Tom Z Aircraft - Electric - Helis (FS/W) 1 Sep 25, 2010 09:07 PM