Now Available: 1/8" GWS Drilled Pinions and Machined GWS Boxes for Astroflight BL

WJ Birmingham · Jul 27, 2003, 05:59 PM

Unable to find a GWS pinion for your 010 8-turn AstroFlight?

Want to put that AstroFlight 010 in a GWS Box?

Look no further, I've found a machinest willing to help us out at reasonable prices.

Don't need the complete gearbox, but just the Plastic Housing?

Not a problem, I sell the parts individually.

Regards,
WJ
www.ParkFlyerMotors.com

turbojoe · Jul 27, 2003, 06:16 PM

I can hear the collective cheer from all of the Astro owners out there. I just ordered two of the bare housings yesterday. Great job Bill. Just what we've been waiting for!

Joe

Gene Bond · Jul 27, 2003, 06:43 PM

Thanks for the great alternative! Now to study it a little....

Pjotrrr · Jul 27, 2003, 06:59 PM

Bought this six weeks ago at www.aeromicro.com...
Works great on my EPP 3D Flyer

Good to see there is another source now, Perry has been out of stock for a while now...

Peter

Karl B² · Jul 28, 2003, 11:00 AM

Any chance of getting a pinion with a 2.3mm hole for those of us still running MiniAC motors?

Karl

WJ Birmingham · Jul 28, 2003, 11:17 AM

The reamer costs 30.00 to make the pinions. If I stocked MiniACs, I would.

At this point, sorry, but it's not out of the question for the future.

Jul 27, 2003, 05:59 PM	#1
WJ Birmingham Registered User St. Louis Metro Joined Apr 2003 2,440 Posts	Now Available: 1/8" GWS Drilled Pinions and Machined GWS Boxes for Astroflight BL Unable to find a GWS pinion for your 010 8-turn AstroFlight? Want to put that AstroFlight 010 in a GWS Box? Look no further, I've found a machinest willing to help us out at reasonable prices. Don't need the complete gearbox, but just the Plastic Housing? Not a problem, I sell the parts individually. Regards, WJ www.ParkFlyerMotors.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GWS "Slope Glider" Versions of Parkflyers Now Available	surfimp	Slope	10	Mar 17, 2004 01:47 AM
Will GWS 400 pinions mesh with 300 spurs??	TStokes	Power Systems	2	Jul 15, 2003 04:29 PM
looking for thrust to weight over 1.5:1 using GWS DX-A motor for >3 mins?	Zephyr	Indoor and Micro Models	0	Sep 19, 2002 07:25 AM
WTB: Pinion Gear for Mini Olympus 2.3:1 gearbox and GWS micro crystal on Channel 27	Ryan Nau	Aircraft - Electric - Airplanes (FS/W)	0	Sep 01, 2002 05:30 PM
gws 3 BLADE Prop now available at.....	Bleriot	Parkflyers	5	Feb 16, 2002 03:10 PM

RCG Sites

About RCG

Features

Tools

Media

Topics

Jul 27, 2003, 06:16 PM	#2
turbojoe M0unt@in M0del$ minion USA, AZ, Mesa Joined Jul 2002 7,008 Posts	I can hear the collective cheer from all of the Astro owners out there. I just ordered two of the bare housings yesterday. Great job Bill. Just what we've been waiting for! Joe

Jul 27, 2003, 06:43 PM	#3
Gene Bond Crash Master Indianapolis, IN Joined Sep 2001 16,620 Posts	Thanks for the great alternative! Now to study it a little....

Jul 27, 2003, 06:59 PM	#4
Pjotrrr Me likes Depron... Amsterdam Schiphol, Netherlands Joined Mar 2003 1,575 Posts	Bought this six weeks ago at www.aeromicro.com... Works great on my EPP 3D Flyer Good to see there is another source now, Perry has been out of stock for a while now... Peter

Jul 28, 2003, 11:00 AM	#5
Karl B² 29 rods from you in western WI Joined Jan 2003 4,856 Posts	Any chance of getting a pinion with a 2.3mm hole for those of us still running MiniAC motors? Karl

Jul 28, 2003, 11:17 AM	#6
WJ Birmingham Registered User St. Louis Metro Joined Apr 2003 2,440 Posts	The reamer costs 30.00 to make the pinions. If I stocked MiniACs, I would. At this point, sorry, but it's not out of the question for the future.