check it out

Electrifly electro streak (2 min 43 sec)

How old is that thing?

Originally Posted by mikeythev

How old is that thing?

not sure but i know its been discountinued

Was that on 3 or 4 cells ? I built it about 2 years a go . Dan

Originally Posted by fx-2

Was that on 3 or 4 cells ? I built it about 2 years a go . Dan

4 cell, awsome flyer, shes a keeper

Originally Posted by ED3

4 cell, awsome flyer, shes a keeper

Mate....just came across your thread.

I have bought/inherited one of these things recently, and it looks like an awesome flyer.

It looks a bit fragile - but what balsa/sheet construction doesn't?

Test-benching this thing shows that it has enormous power on 3s 2200mAh.

I'd be interested to see how ours go.

Please keep in touch.

BJ

Originally Posted by BJ64

Mate....just came across your thread.

I have bought/inherited one of these things recently, and it looks like an awesome flyer.

It looks a bit fragile - but what balsa/sheet construction doesn't?

Test-benching this thing shows that it has enormous power on 3s 2200mAh.

I'd be interested to see how ours go.

Please keep in touch.

BJ

actually its NOT that fragile wing and tail are balsa but the fuse is fiberglass
i have a scorpion motor not sure what model and 10x8 props and 60 amp esc and run a 4 cell 3600 mah pack. unless you have a big motor up front you might be tail heavy that batt is too small mine has unlimited vertical and lands like a foamy glider nice and slows with no flaps or spoilerons
take care

ed

Thanks for your reply, Ed.

Mine has a balsa fuze and I'm pretty sure she's been set-up to run a 3S 2200.

From what I could find so far on the 'Net, a CoG of 90/93mm should be pretty much on the mark.

Darn windy as hell today, so no maiden for me *poop*.

They're quite a good looking plane - sort of a cross between a 3D'er and a speed machine, with a touch of retro vintage lines around the nose area.

Should be a hoot to fly...

BJ