HobbyKing.com New Products Flash Sale
Closed Thread
Thread Tools
This thread is privately moderated by Etonic, who may elect to delete unwanted replies.
Old Jul 26, 2003, 10:08 AM
Registered User
United States, VA, Chesterfield
Joined Jul 2002
224 Posts
Trader Rating: 147
FS- Last lot of equipment (trimming my RC for start of school)- Epp wing, esc, poly's

Hi Guys,

This (I think) will be my last lot of RC equipment I'm selling due to grad school starting in a few weeks!

I may add more this afternoon...
------------------------------------------------------------
** 36" EPP Flying Wing WITH (2) 9 gram servos and 3 motors (mild to wild) - Great flying wing all EPP foam (takes a beating!) One repair area near prop (easily hidden if you wanted to cover).

Comes with :
(2) 9 gram servos
(1) sp 280 motor/gearbox and 8x6 graupner scimitar prop
(1) SPEED 400 with adapter-NEW (in pic #2)
(1) Speed 400 with 2 props and push on adapters -NEW

Asking $57 SHIPPED!SALE PENDING
-----------------------------------------------------------------

(1) JETI 04 esc - tested and workes perfect - 4amps cont and 10 amps surge. Asking $20 shipped SALE PENDING

--------------------------------------------------------------------

(2) Kokam 1020mah 2s1p 7.2V packs (2-cell) with JST(or micro deans)- Brand new cells! - Asking $21 each shipped!

Sold
-------------------------------------------------------------------------

Thats it for now! I can take Paypal (non CC preferred) or Mo

May have more later.

FYI - I'm on the good sellers list many times!


Thanks,
Mark
Etonic is offline Find More Posts by Etonic
Last edited by Etonic; Jul 26, 2003 at 09:56 PM.
Sign up now
to remove ads between posts
Old Jul 26, 2003, 10:09 AM
Registered User
United States, VA, Chesterfield
Joined Jul 2002
224 Posts
Trader Rating: 147
speed 400 Motors that go with wing
Etonic is offline Find More Posts by Etonic
Old Jul 26, 2003, 10:10 AM
Registered User
United States, VA, Chesterfield
Joined Jul 2002
224 Posts
Trader Rating: 147
Jeti 04 ESC - VERY SMALL

....
Etonic is offline Find More Posts by Etonic
Old Jul 26, 2003, 11:06 AM
small electrics r BIG FUN
Iowa
Joined Aug 2000
4,317 Posts
Trader Rating: 137
No photos of the packs ?

Are they really 2s1p or just 2 cells in series packs ?

Are they home-made ?

Thanks

Al
Al P is offline Find More Posts by Al P
Old Jul 26, 2003, 12:19 PM
Registered User
United States, VA, Chesterfield
Joined Jul 2002
224 Posts
Trader Rating: 147
Hi Al,


There are no photo's of the packs because they are not made yet. IMHO and in my experience, I make the packs BETTER that most off-the-shelf packs. It takes me about 20 mins to make a pack and its made right. I use heat shrink strain reliefs and fill the void between the packs with hot glue to avoid shorts during an impact. I'm an engineer and pretty fussy on how I do things.....I'll include some pics of finished packs below and the new cells I have for sale in their current state. If anyone wants just the cells with a JST connector and shrinkwrap, I'll ship them as is for $18.00.

Thanks,
Mark


ALSO- a 2s1p pack is 2 packs in series...to read the notation the easiest way is to think that the first 2 letter and # combo determines pack voltage (# x 3.6V) The second pair determines capacity in mah ( # x single cell capacity) --the second # also means how many sets of the first # you have-

i.e.- a 2s1p - 2 cells in series (2 x 3.6V) and its ONE set of that pair in parallel.

Confused yet!
Etonic is offline Find More Posts by Etonic
Last edited by Etonic; Jul 26, 2003 at 12:29 PM.
Old Jul 26, 2003, 12:20 PM
Registered User
United States, VA, Chesterfield
Joined Jul 2002
224 Posts
Trader Rating: 147
Here are some finished 2s1p packs....Also I'm showing a "y" connector I use to make 2s2p packs capable of 10A. I do not shrink the wrap all the way because I dont want all that compression around the top of the cell (one side usually has some wrinkles left- other side has velcro)
Etonic is offline Find More Posts by Etonic
Last edited by Etonic; Jul 26, 2003 at 12:22 PM.
Old Jul 26, 2003, 12:42 PM
Registered User
Hollywood, FL
Joined Dec 2000
53 Posts
Trader Rating: 0
I'll take your (2) 7.2 volt kokams at 21 each. Email me with your paypal info.

dkkanner@bellsouth.net
dan kanner
Entropy1 is offline Find More Posts by Entropy1
Old Jul 26, 2003, 12:50 PM
small electrics r BIG FUN
Iowa
Joined Aug 2000
4,317 Posts
Trader Rating: 137
Mark

Thank you for the photos and explanation. My apologies for the "newbie to LiPo ignorance".

I'm interested in two packs as well, and a Y harness. I have a couple more dumb questions to ask so I'll send you a pm.

Thank you

Al
Al P is offline Find More Posts by Al P
Old Jul 26, 2003, 01:41 PM
Pres. Uff-Da Air
Vincennes, Ind. 47591 USA
Joined Jan 2000
179 Posts
Trader Rating: 11
Epp Wing

Mark, I'll take your wing as described. I will send pay pal of $57 I have purchased from you before and you are on the GOOD SELLER list. Uff-Da Pete
Lloyd Peterson is offline Find More Posts by Lloyd Peterson
Old Jul 26, 2003, 03:56 PM
Registered User
Miami, FL USA
Joined Feb 2000
89 Posts
Trader Rating: 67
Etonic I will take the Jeti 04. Let me know where to send the money. I do not have PayPal. Cecil Miami, FL
cwethy5252@aol.com
Cecil M Wethy is offline Find More Posts by Cecil M Wethy
Closed Thread

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
FS- Last lot of items- Beaver, flt pack, motors...etc Etonic Aircraft - Electric - Airplanes (FS/W) 7 Nov 12, 2004 11:04 AM
FS all my RC equipment for cheap Bschulz Aircraft - Electric - Airplanes (FS/W) 10 Aug 13, 2004 11:56 PM
FS/FT I'm selling all my RC parts for cheap Bschulz Aircraft - Electric - Airplanes (FS/W) 8 Jul 18, 2004 11:02 AM
FS- MORE equipment (trimming my RC for start of school)- E-zipper kit, rx... Etonic Aircraft - Electric - Airplanes (FS/W) 3 Jul 28, 2003 03:56 PM
FS- I'm losing it...more, and probably last lot of equipment/plane Etonic Aircraft - Electric - Airplanes (FS/W) 46 May 09, 2003 11:23 PM