thanks Fu,

when I get these AOI goggles,
it will basically be plug and play
to my Trainer Port.....

cant wait to get it....

:-)

We will complete quite a lot at the end of this month and start to send them to distributors and you can also buy directly from me at then.
best regards,
Fu

for when the Foam version galssfox?

working on it, i hope it can be made before spring festival,hehe
FOXTECH
Fu

Hi all,

Had my first couple of flights today with the Foxtech AIO goggles. Great image quality. I didnt get to try the Pan/tilt as I used a static cam but maybe tomorrow Il try it out.

What is the sensitivity of the In-built 2.4 rx? I Flew today only using that RX, 8db patch, but suffered quite bad banding from my Dragonlink. Usually I use a lawmate RX with no problems and will probably divert back to this but Im just curious. Can anyone else confirm worse banding with UHF?

Regards

Doug

I have NO problem with my Dragonlink.

Try to open your video TX and rebind your RX of your Dlink.

I'm going to change my Omni antenna for a 9dpi. Can wait to fly :P

I'm going to try to fly my Tricopter tomorow... I the weather want to :P

FoxTECH FPV WILL DO A BIG SALE IN FEW DAYS !

Be sure to check the site for BIG rebates !

Originally Posted by spitfire_Doug

Hi all,

Had my first couple of flights today with the Foxtech AIO goggles. Great image quality. I didnt get to try the Pan/tilt as I used a static cam but maybe tomorrow Il try it out.

What is the sensitivity of the In-built 2.4 rx? I Flew today only using that RX, 8db patch, but suffered quite bad banding from my Dragonlink. Usually I use a lawmate RX with no problems and will probably divert back to this but Im just curious. Can anyone else confirm worse banding with UHF?

Regards

Doug

do you have a fatshark ones?
if so witch one you like the most?

Originally Posted by wallaguest1

do you have a fatshark ones?
if so witch one you like the most?

No I usually fly with a 15" LCD monitor, these are my first goggles so I cant really comment.

Will try again today to see If I can improve the banding.

Doug

.....I just order'd mine .....

I wanted the silver colored ones, but decided on the
black ones, just to keep some light out.....

I have the FatShark BASE edition and I will do a
comparison as soon as I get my Mulitplex FPV Cularis all setup.....

.....kinda' dumb question but, on the Manual for the Goggles,
it has preSelected ch. 5 & 6,

am I able to change that to ch. 6 & 7 ? that is where I plan
to plug my Pan/Tilt servos on DragonLink RC reciever.

rclab1 i am quite sure you can change the channels for 6 and 7,

waiting impatiently your review

I will review FatShark BASE vs FoxTech AOI goggles
as fast as I get them....and as soon as this
weather gets warmer

I got the Foxtech AOI goggles at
ReadyMadeRc.com


I know how it is to wait, and I dislike waiting

Yes you can assign the pan/tilt channels to whatever you want.

Doug

Hi,
Did anyone make a range chech with this google ?
Especially using 5.8gh
Thanks
Answers are very appreciated.

Can I fly 2km with 5.8gh 500mw transmitter?
Thanks

probably yes firatp