Probably my favorite picture from the 2013 Nationals.

Originally Posted by Aerominded

I really like that boat Dave!

My IOR half tonner...

http://www.rcgroups.com/forums/attac...mentid=3556223

Great to see an IOR yacht here. I have a full sized Quarter Tonner and a 1200mm hull I may work on (was found at local tip!).

Imoca 60 Gamesa - Wow, what an amazing Yacht! At a loss for words. Just amazing!
Boomer

If you will see more ,send a email . I will be send a link to you .

Originally Posted by rexonamen

here is a picture

Nearly gets away with being a big boat only thing that let it down was the silver ball in the garden. Wow looks so real at a quick glance

http://www.eurosail.nl/gallerijdetail.php?id=38

UPDATE

That is unbelieveable.

Hello here is litlle spec of the modell , 4year min4hours a day
its built with Carbon ,
Carbon mast /boom 3+month ,
Carbon rigging ,
Canting keel in wetbox
,2x Daggerbord(up/down)
4x furlings working,
4x winch frontsails,
1x winch mainsail
1x winch track
the harken winches on deck working with using sheets ,
flashl top/light ,decklight ,cabine,red/wite light, nav lights,
hydrogenerator u/d 2x
backstay 2x, in/ out
enigine with wateroutlet (litle pipe`s back) waterpump with alarm ,
gadget gashandle move`s,in use front/back drive
trimflap u/d (black stripe backsite )
greinder working with sheets/track ,tiller rudder ,
cleats working don`t like knots,
every thing is handmade by me even the decoration ,painting, all funtions as orginal ,full radiocontrol .
the engine is hidden in the hull and com out if need (close himselve afther 6second)and stops,
wight compl with keel ????????kg .this and the rest is topsecret


It starts as Ecover oct2008 and refit to Gamesa oct2012 ,
only now the last litle things ,but waiting on nice weather ,

Hope enyou the pic`s , if there is more I post .
http://www.eurosail.nl/gallerijdetail.php?id=38


greatings Rexonamen.

Rexonamen... that is absolutely awsome.. fantastic work.

A photo of my homebrew IOM prior to a slight alteration to increase the depth of the bow thus increase the LWL

Originally Posted by flatlandsailor

Probably my favorite picture from the 2013 Nationals.

I posted this on the Indy Admirals Facebook page. Hope you don't mind! Its a great photo!

http://www.facebook.com/indyadmirals

Originally Posted by rexonamen

Hello here is litlle spec of the modell , 4year min4hours a day
its built with Carbon ,
Carbon mast /boom 3+month ,
Carbon rigging ,
Canting keel in wetbox
,2x Daggerbord(up/down)
4x furlings working,
4x winch frontsails,
1x winch mainsail
1x winch track
the harken winches on deck working with using sheets ,
flashl top/light ,decklight ,cabine,red/wite light, nav lights,
hydrogenerator u/d 2x
backstay 2x, in/ out
enigine with wateroutlet (litle pipe`s back) waterpump with alarm ,
gadget gashandle move`s,in use front/back drive
trimflap u/d (black stripe backsite )
greinder working with sheets/track ,tiller rudder ,
cleats working don`t like knots,
every thing is handmade by me even the decoration ,painting, all funtions as orginal ,full radiocontrol .
the engine is hidden in the hull and com out if need (close himselve afther 6second)and stops,
wight compl with keel ????????kg .this and the rest is topsecret


It starts as Ecover oct2008 and refit to Gamesa oct2012 ,
only now the last litle things ,but waiting on nice weather ,

Hope enyou the pic`s , if there is more I post .
http://www.eurosail.nl/gallerijdetail.php?id=38


greatings Rexonamen.

Herman: Wow is all I can say....any sailing vids yet?

Thanks for compliments , and no it not sailing ,I have to wait to work outside its still verry cold here (0 dgr) to trim the mast /rigging , and a few rope`s , then whe can massure the sailplan , all is scale 1:10 , but for the sail its better to massure , when its on the water I make pic`s .

opc orn:


Rexonamen

I am working now on the draak360 a litle refit ,make it ready for sailing (stand 3j still) if you see the spinaker hatch you can open it and now I make a spinaker pul/in/out and to sail , the system is working for test and looks well , now rebuild the sheet system and than it with a repaint ready .

http://www.modelbouwforum.nl/forums/...aak-360-a.html

Here a litle vid of the test , the sail/only/for test the new one is on my dragon on the pics and the orginal dragon, until now the system works without spiboom, : expl the genua you can roll up the hatch open than pull out the spi , and adjust the sheet line , the most things I build together at the build ,2004/5 ,and the Draak360 on our site

greatings
rexonamen

Originally Posted by coolmobility

Great to see an IOR yacht here. I have a full sized Quarter Tonner and a 1200mm hull I may work on (was found at local tip!).

Thanks, it's a fun little boat, coolmobility! I designed it to be a semi scale Half-Tonner (1:15th scale) Late '70's vintage. I'm slowly working on an 'interpretation' of the QT "Magic Bus".

Rexonamen, I really like the scale boats!

In north of GER any time strong wind.




Pictures from More pictures



Pictures from More pictures

Ulli