Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Azarr, who may elect to delete unwanted replies.
Old Oct 09, 2010, 05:22 AM
Azarr is offline
Find More Posts by Azarr
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
Dayton Intl, Ohio, United States
Joined Jan 2000
8,354 Posts
Leadfeather's Yak 55

I very seldom build more than one of the same plane, I think this is the 7th Yak I've built now. The Yak flys great at around 6.5oz, but this was my attempt to get down under 4oz. I almost made it at 118.7g (4.15oz) A little less glue or paint and I would have been under 4oz.

The wing is 9mm EPP, the fuselage and rudder 6mm EPP and the ailerons and elevator are 3mm depron. Hacker A10-15S, Turnigy Plush 6A esc, Futaba 3114 servo on ailerons and Dymond D47 on elevator/rudder.

Great flying plane, does everything the others do only at slower speeds.

Azarr is offline Find More Posts by Azarr
Reply With Quote
Sign up now
to remove ads between posts
Old Mar 02, 2011, 08:18 AM
PinkYakRC is offline
Find More Posts by PinkYakRC
Yeeah buddy!
PinkYakRC's Avatar
Northern Colorado
Joined May 2010
2,451 Posts
That Yak looks very well built. It must fly really well at 4 oz!!
PinkYakRC is offline Find More Posts by PinkYakRC
Reply With Quote

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Leadfeather's EPP Yak 55 motorhead Foamies (Kits) 68 Jan 04, 2015 10:09 PM
Discussion 18.5" Yak 55 Build (leadfeather's EPPYAK-55plans) K0na_stinky Foamies (Scratchbuilt) 1 Apr 05, 2009 04:05 PM