|Aug 12, 2010, 03:54 PM|
St. Augustine, Florida
Joined Sep 2006
Turnigy 2204-14T as a Replacement for Park 250 or Rimfire 250
I just ordered a couple of these and they look like great little motors. I was wondering if anyone had any experience substituting it for the traditional Rimfire and Park 250 motors.
Thanks for any input.
|Aug 12, 2010, 04:54 PM|
|Aug 12, 2010, 08:26 PM|
The turnigy works well for 3d planes in the 6 to 6.5oz range with good power.. 7 oz it will hover but power is minimal in the 7oz range. Anything under 6oz will be highly powered on 2s. Cant beat the turnigy 2204-14t with a hk 10 amp esc and a lipo for under $25.00 to power these small foamies.. nice power system for the money. Flew the turnigy in a few planes.. heres different planes and auw's with it. 2s 500mah 20c hobbypartz lipo for all the set ups with gws 8x4.3 prop. I'll have some more hobbyking outrunners to try soon as well.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Wanted||WTT rimfire 300 for a rimfire 250 or Hacker 9L||scottiesoccer1||Aircraft - Electric - Power Systems (FS/W)||0||Aug 08, 2010 10:07 PM|
|For Sale||TURNIGY 2204-14T 19g Outrunner!!!||xtremeRCpilot||Aircraft - Electric - Power Systems (FS/W)||1||Nov 03, 2008 11:46 AM|
|Discussion||Anyone tried using TowerPro 9g w12A ESC with Turnigy 2204-14T 19g motor?||groovejet||Power Systems||2||Aug 28, 2008 04:51 PM|
|Discussion||TURNIGY 2204-14T 19g Outrunner||miki.r||Power Systems||0||May 15, 2008 04:31 AM|
|Sold||TURNIGY 2204-14T 19g Outrunner $13 Shipped||timocharis||Aircraft - Electric - Power Systems (FS/W)||2||Apr 18, 2008 10:01 PM|