Yellow 46" Vyper BNF

loaded with the recommended hardware:

130g Omega
HS-65HB's in the wings
HS-65MG's in the tail
AR6200 Rx w/Satellite
AB45 ESC

$400 + Shipping

Last pic shows a couple chips on the cowl that I went over with a yellow Sharpie

Thanks
Rob

Good looking Vyper!!

Sure Is

One of the best

Thanks
Rob

beautiful Vyper you got there but for $400 I RATHER buy the NEW Combo Vyper $300 @ http://www.3dhobbyshop.com

Don't forget to add $120 for servos and $80 for the RX, plus a few more bucks for prop, any extentions, etc, besides the combo is on Back Order so you will spend more gather those components yourself.

Thanks for looking
Rob

don`t forget glue

Thanks Carpet, I forgot

Rob

If I had a buyer for my 3DHS 47" Extra....I'd be having this puppy delivered to me!

What color and what do you have in it?

You may want to mention it in the 3DHS 47" Extra thread, since they are coming out with new schemes some guys are trying to get the old scheme

Rob

It's the blue version. Comes with the recommended setup from 3DHS: Torque 900 brushless motor, Airboss Elite 45A ESC, HS-65's and APC 13x6.5 prop.

It's never been crashed and I take off and land on asphalt, flies great. It's a 3D plane and I just use it to pattern fly and do a few aerobatics. Kinda overkill for me. I think someone else would appreciate all of it's capability. I'm guessing $300 would be a good price??

Originally Posted by bucknut

It's the blue version. Comes with the recommended setup from 3DHS: Torque 900 brushless motor, Airboss Elite 45A ESC, HS-65's and APC 13x6.5 prop.

It's never been crashed and I take off and land on asphalt, flies great. It's a 3D plane and I just use it to pattern fly and do a few aerobatics. Kinda overkill for me. I think someone else would appreciate all of it's capability. I'm guessing $300 would be a good price??

you def need a vyper

Ok, a Vyper it is. So, someone either trade me or pony up so I can buy this one. Hypersprint, don't you have to go through Ohio to get from VT to FL....LOL!!!!

Bucknut - I don't know if finchkid24 settled on the SR he had his eye on. Maybe he'd be interested in your SHP?

http://www.rcgroups.com/forums/showthread.php?t=1285334

Sorry to clutter your thread, Hypersprint. Sweet looking Vyper. If it's still available when you're passing through MA, let me know.

Originally Posted by Hypersprint

Don't forget to add $120 for servos and $80 for the RX, plus a few more bucks for prop, any extentions, etc, besides the combo is on Back Order so you will spend more gather those components yourself.

Thanks for looking
Rob

really how much you sell the kit, with esc, motor, and servors as Read to Fly? It's seem like the price you gave samething as NEW but your have been used.

Yes the parts are used but the way I set a price for a plane is to add up what I have into it and deduct a percentage based on condition.

So if you put your info of $300 for the combo then add what the combo does not include $120 for servos, $80 for RX and we will say $25 for misc propm glue, extensions, etc

That add up to $525

Now based on the condition of the plane I looked at what 25% off would be $131.25 which would be $393.75 so I rounded up to $400

Now, if you are interested in the plane without the RX then I can drop to $350 since I can easily get $50 for the RX. Just be sure you keep in mind that this is plus shipping which would be around $50 via Greyhound but I will check USPS once it is packed up.

Thanks
Rob