HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Aug 14, 2010, 05:02 PM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
Hi guys finaly got back and got some moreplanking done.
I placed the last few strakes, just need to adda few more stealers at the stern to complete the first planking...

the hull will be painted and i`m contemplating coppering the bottom, but if then it will have to be something lighter than the supplied copper plates.. maybe the same technique you used jerry. anyway i need to make teh second planking first..
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Sign up now
to remove ads between posts
Old Aug 15, 2010, 02:57 AM
e-powered foam
rawy's Avatar
swiss watch makers area
Joined Dec 2002
812 Posts
here's where the guy hides

very nice job MB, was asking myself if you where at flying or building, the builds start to show Museum Quality, hope to see one of those on our lake once

rawy
rawy is offline Find More Posts by rawy
Reply With Quote
Old Aug 15, 2010, 03:34 AM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
and so do i rawy couldn`t think of a nicer setting than at your place ! As for museum quality... well maybe museum of modern arts
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Aug 15, 2010, 05:38 PM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
got the 3 stealers on the stbd side in to close the planking on that side... looks a bit rough all in all, hope that will improve with sanding
Tomorrow i`ll finish the other side and start cleaning up the area for the sternpost..

I just weighted the hull it`s 330g right now. All the material for 2nd planking is another 140g total so i guess at least 120g used with glue.
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Aug 17, 2010, 05:11 PM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
First planking finaly completed

next will be sanding and filling.. and sanding and filling..
i`ll have also to figure out how the top 3 planks below the gunport pattern are supposed to run into the stern planking.
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Aug 18, 2010, 03:33 AM
Registered User
Gerald K's Avatar
Joined Sep 2007
123 Posts
hello meatbomber

nice ship and nice work! and a good size for rc sailing.

my dominica 2 is arrive today.

regards gerald
Gerald K is offline Find More Posts by Gerald K
Reply With Quote
Old Aug 18, 2010, 03:46 AM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
great Gerald! So we have a race then looks like i have a bit of a headstart tho.. did you already decide how you going to go about it with the RC installation (what to RC and how to acuate it ?)
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Aug 18, 2010, 05:55 PM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
First Planking completed

it`s really satisfying to touch the smooth curves of the hull after sanding! I thought about cutting corners now and maybe leaving the 2nd planking off, but then it will add a lot of strength and make the hull easier to waterproof.
Hopefully it should also be much easier to lay it now that there is a properbase beneath..
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Aug 23, 2010, 02:27 PM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
starting the second planking... this is a bit tedious at the bulwarks i have to say with all the cutouts..
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Aug 25, 2010, 07:57 AM
Prefers a wet bottom
oyster34's Avatar
Directly over the center of the earth.
Joined Nov 2007
15 Posts
Meatbomber, fine looking progress so far! FYI, there is a great web build with lotsa detail photos of a jotica cruiser class model build at this address: http://www.julianstockwin.com/Teazer%20Model.htm
oyster34 is offline Find More Posts by oyster34
Reply With Quote
Old Aug 26, 2010, 03:38 PM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
Thanks mate i`m very happy with it too!

had a look at the Tazer build and it is very nice ! Doubt my Snake will reach that perfection tho i`ll have to leave quite some detail out for sailabilities sake.

i got the second side bullwark outside planking done and it`s nice and symetrical. Other than having to do all the cutouts it went pretty quick as hardly any tapering was required.
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Aug 31, 2010, 05:24 PM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
continuing on the second planking... the planks are narrower than the first planking so it`s even slower going than the first. at least that gives me enough time to dwell on how to do the rigging
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Aug 31, 2010, 11:51 PM
e-powered foam
rawy's Avatar
swiss watch makers area
Joined Dec 2002
812 Posts
Outstanding Job MB,

the pics of your previous post already led me to imagine the setup of the rigging, this model will be a blast on the water.

Walter
rawy is offline Find More Posts by rawy
Reply With Quote
Old Sep 01, 2010, 07:36 AM
Square-rigger
meatbomber's Avatar
Klatovy, Czech Republic
Joined Mar 2004
3,348 Posts
so i hope walter

got teh 2nd planking on teh stbd side finished... now on to port side. then inside of teh bullwarks and decks.. damn i start to be tired of planking
meatbomber is offline Find More Posts by meatbomber
Reply With Quote
Old Sep 01, 2010, 08:50 PM
Registered User
DanL's Avatar
United States, MN, Brainerd
Joined Oct 2004
2,397 Posts
bomber -
Really great work on a model of a cool prototype. Your build makes me wish I could start another myself. But I barely have time to sail the Syren.
This thread just keeps getting better and better builds...keep it up!

hey - ps - my mom was czech... Are you an American in CR? - great english....
DanL is offline Find More Posts by DanL
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Square Rigger kit-18 Gun Brig-of-war of 1797 Ray C Scale Sailboats 2997 May 14, 2014 01:01 PM
Build Log SC&H 1/24 Scale HMS Surprise, Skipper AM299 Scale Sailboats 72 Sep 11, 2010 11:40 AM
Discussion acceptable sloop at aileron in a F5D ship ? sebbe High Performance 8 Jul 07, 2010 03:41 PM
Build Log 1/400 scale HMS Hood-Lindberg stewmeat95 Scale Boats 39 Jul 02, 2010 04:21 PM
Question hms cruiser class 1797 dogdog Scale Boats 1 Apr 05, 2007 08:11 AM