Alfred
how about this?
http://proto-pic.co.uk/arduino-cookbook/

Twickenham Indoor Flying this weekend guys, any of you lot heading in.
I'll be there with some new OP hardware

Skywalker sticking Guys what did you all use? UHU Por?

Thanks!

Originally Posted by flylite

Skywalker sticking Guys what did you all use? UHU Por?

Thanks!

Gorilla Glue all the way.

Originally Posted by flylite

Skywalker sticking Guys what did you all use? UHU Por?

Thanks!

Por and CA
Just sand the surfaces before hand to remove the release agent

Originally Posted by flylite

Twickenham Indoor Flying this weekend guys, any of you lot heading in.
I'll be there with some new OP hardware

Yep I'll be there.
No Mitch though
Got my spider hex in the air with the CC3D plugged in.
Not very stable yet but I'm sure it needs some tuning.
Micro quad now has nav lights so I can keep an eye on it
As per the QAV500 will be in attendance but now with 4s 5000 packs

Originally Posted by mudlark

Yep I'll be there.
No Mitch though
Got my spider hex in the air with the CC3D plugged in.
Not very stable yet but I'm sure it needs some tuning.
Micro quad now has nav lights so I can keep an eye on it
As per the QAV500 will be in attendance but now with 4s 5000 packs

Ah you saw the light and went 4S - awesome
I guess we can have some mini quad pylon racing then (I'll bring mine).

Originally Posted by flylite

Ah you saw the light and went 4S - awesome
I guess we can have some mini quad pylon racing then (I'll bring mine).

Make sure you get some lights on it

Originally Posted by woodss

Done a few quick FPV tutorials on my website for newbies (even though I still am one really!) while I had a break from work over xmas and the weather was crap, would be interested in any feedback!

http://www.intothebluerc.co.uk/FPV-Tutorials/

Incidentally, I have a nice new AXN build to maiden when the weather sorts itself out, hooray - happy new year everyone!

Good work, will point that out to people when they ask me about FPV (more offen than I expected)

Originally Posted by mudlark

Por and CA
Just sand the surfaces before hand to remove the release agent

+1 gorilla is good but will be heavy and messy. the glue that came with the kit is excellent by the way. it works like the UHU POR|

Originally Posted by rcmonster99

+1 gorilla is good but will be heavy and messy. the glue that came with the kit is excellent by the way. it works like the UHU POR|

I always chuck there glue. Por all the way
Gorilla is good but as you say messy and heavy

Originally Posted by rcmonster99

+1 gorilla is good but will be heavy and messy. the glue that came with the kit is excellent by the way. it works like the UHU POR|

Ah, good info ty B!

Gorilla glue isn't too bad, just work quickly. have pre prepared strips of masking tape, a bowl you don't mind throwing away (a clean chinese tub is perfect), sanded and de-dusted surfaces.

Big glob of gorilla glue in the bowl, about half as much again in pure water, very quick mix, very thin spread over your gluing surface, Mate the surfaces then cover all edges with masking tape. Make sure where ever you put the model down will keep it from warping while setting, and is covered in news paper.

After about 25 mins, any bits that have squeezed out will have settled enough to be pinched off. two hours later and rip off the tape, lightweight solid filled joint

CJ

Originally Posted by woodss

Done a few quick FPV tutorials on my website for newbies (even though I still am one really!) while I had a break from work over xmas and the weather was crap, would be interested in any feedback!

http://www.intothebluerc.co.uk/FPV-Tutorials/

Incidentally, I have a nice new AXN build to maiden when the weather sorts itself out, hooray - happy new year everyone!

Woodss, Good stuff - mind if I link to it from the Google+ community FPV Group?
https://plus.google.com/u/0/communit...35814256281184

Missus is getting a new phone in 2 weeks...which by default means I can get a Skywalker =D