Originally Posted by brucey

Nah I just had a look and couldn't find it. It was a couple of years ago! I can post it to you and see if its suitable

Brucey, could you take a pic?

Originally Posted by Carlos230023

James, I've got a 3gram camera (PAL) from FPVHobby. And lens options (standard one or a wide angle jobbie) if your in a pinch I can send them your way.

CJ

Thanks CJ - does it take srd lens's (2.8mm Etc)?
A link would be good as I still not sure what's what with these lil cams

I think its one of these I'm after http://www.fpvhobby.com/48-3-5v-720x...ls-camera.html
Small but good in the dark and a great fov.
Its for my super small surveillance quad (the one that's launched from the Y6).

I'll see if I can persuade the Mrs, I'm a few timezones away at the minute

Afraid not James. This is what I've got

http://www.fpvhobby.com/26-3-grams-cmos-pal-camera.html

And one of these lenses spare.

http://www.fpvhobby.com/138-wide-ang...no-camera.html

CJ

Originally Posted by Carlos230023

Afraid not James. This is what I've got

http://www.fpvhobby.com/26-3-grams-cmos-pal-camera.html

And one of these lenses spare.

http://www.fpvhobby.com/138-wide-ang...no-camera.html

CJ

Carlos, would you be interested in selling said camera/lense combo? I want to FPV my x4!

Lol. Well if James doesn't buy it (as he seems despitate) then it's going on mine when my micro VTx shows up. I don't mind waiting for a replacement is the thing :P.

CJ

No worries, appears my x4 has started pulsing a motor when just above hover on the throttle. however if i hold it, it doesnt pulse. Seems like a vibration/gyro issue

Originally Posted by flylite

http://www.fpvhobby.com/transmitter/...ansmitter.html

Anyone know what chans this would be on?

Flylite,

if you look at the link and scroll to the bottom you'll see it has channel selection pins on the board Chans 1,2 and 3.

A.

Originally Posted by AndyOne

Flylite,

if you look at the link and scroll to the bottom you'll see it has channel selection pins on the board Chans 1,2 and 3.

A.

Doesn't he mean the frequency of the channels to match the receiver?

Originally Posted by Bowerz

No worries, appears my x4 has started pulsing a motor when just above hover on the throttle. however if i hold it, it doesnt pulse. Seems like a vibration/gyro issue

Time to change thoes banged up props methinks :P

Well as its blowing a gale all weekend it means more printing time for me. Ill really push to get your P&T done mike. Last couple of weeks I've been slammed with work. You wouldn't believe how much of our clients money I've spent on boiler parts these last few weeks. I'm almost into 6 figures :P.

CJ

Originally Posted by Carlos230023

Time to change thoes banged up props methinks :P

Well as its blowing a gale all weekend it means more printing time for me. Ill really push to get your P&T done mike. Last couple of weeks I've been slammed with work. You wouldn't believe how much of our clients money I've spent on boiler parts these last few weeks. I'm almost into 6 figures :P.

CJ

no hurry, head tracker parts didn't arrive yet anyway. And the weather's blimmin awful, I can't see much flying time coming up...

Agreed, at least that gives way for design time. I'm getting very close now! Getting on for 170+ hours.

CJ

Originally Posted by Carlos230023

Agreed, at least that gives way for design time. I'm getting very close now! Getting on for 170+ hours.

CJ

That doesn't look like a multi lol

Originally Posted by badlands

Putting my chopper into some tight spaces!


http://vimeo.com/55180705




Many props were sacrificed in the making of this video...



:-)

impressive flying ! loved the use of toboggans and ramps, very clever flying ! as per the song and model....I am convinced the song is about "genitelia"

Evening all, I just started an FPV community on Google+
If anyone's interested https://plus.google.com/u/0/communit...35814256281184