Espritmodel.com Telemetry Radio
Reply
Thread Tools
Old Jun 15, 2003, 01:14 AM
Blissfully Ignorant
Biggles604's Avatar
Port Moody, BC, Canada
Joined Oct 2002
235 Posts
Switchback re-build thread (or What the $#*& was that!)

Well, it was inevitable, after ~60 flights, I pranged my SB3d. I've been getting better and better, flying it with more control throws than Doug recommends, no expo or D/R and a Hacker B20 12L in front. Just getting the hang of hovering too. 'Get to the point!' I hear you cry.
I've mastered the plane, I am perfectly comfortable doing anything with it, except, as I found out today, flying it over a tin roofed baseball dugout, which I found makes some fantastic radio interference! the plane dropped out the sky, cartwheeled and bounced off the nose. After that sickening crunch, I was actually not even upset! the first thought that went through my mind was 'I can do a re-build thread, and those wonderful lads on EZone can join along and put in pointers so we can all learn from this'.
I'm excited. A little dismayed that I am grounded for a few days (I love that hacker!)
So, here goes with the damage. Fortunately no electronics were harmed.
Biggles604 is offline Find More Posts by Biggles604
Reply With Quote
Sign up now
to remove ads between posts
Old Jun 15, 2003, 01:15 AM
Blissfully Ignorant
Biggles604's Avatar
Port Moody, BC, Canada
Joined Oct 2002
235 Posts
Another shot detailing the fuse better
(BTW, these shots were taken with my GSmart Mini3, which I think is truly surprising. I have daylight bulbs on my painting desk, and the combination meant absolutely no light level touch ups on the photos!)
more tomorrow!
Biggles604 is offline Find More Posts by Biggles604
Reply With Quote
Old Jun 15, 2003, 01:36 AM
Lurker
Longmont, Colorado
Joined Nov 2000
493 Posts
Do it to me one more time...

Check out these threads for crashed and rebuilds.

http://www.rcgroups.com/forums/showt...hreadid=117475
http://www.rcgroups.com/forums/showt...0&pagenumber=3
http://www.rcgroups.com/forums/showt...0&pagenumber=4
KonstantKrash is offline Find More Posts by KonstantKrash
Reply With Quote
Old Jun 15, 2003, 09:40 AM
Mountain Models Wannabe
CoClimber's Avatar
Ithaca, NY USA
Joined Mar 2001
4,370 Posts
I keep thinking of that Monty Python line: "It's just a scratch!"

Definitely looks rebuildable. Thin CA is your friend.

Doug
CoClimber is offline Find More Posts by CoClimber
Reply With Quote
Old Jun 15, 2003, 09:48 AM
an earth bound misfit, I
Basketcase's Avatar
St. Pete, Florida
Joined Sep 2001
9,429 Posts
Ouch Biggles, at least it looks like an easy rebuild.

Speaking of baseball fields, don't try to fly on the other side of a chainlink backstop. It seems the radio waves don't pass through chain link very well. You can guess how I learned this little tidbit.

BC
Basketcase is offline Find More Posts by Basketcase
Reply With Quote
Old Jun 15, 2003, 10:42 AM
D W
I love you man.
D W's Avatar
United States, NY, Pelham
Joined Sep 2002
2,743 Posts
Here's mine. All fixed except for covering. I find that Probond glue is ideal for these type of repairs. Really light and expands to fill gaps. If you don't have some, get some. Soooo much better than epoxy.
-David-
D W is online now Find More Posts by D W
Reply With Quote
Old Jun 15, 2003, 12:07 PM
Registered User
Idaho
Joined May 2002
1,067 Posts
Uhhh, David,
You might want to take a look at the pic posted. I don't think you've got it fixed yet!

JT
DEPENDS is offline Find More Posts by DEPENDS
Reply With Quote
Old Jun 15, 2003, 12:11 PM
Registered User
mcart1956's Avatar
Tulsa,Ok
Joined Jan 2003
248 Posts
DW, you're right. That Probond really did the trick

m
mcart1956 is offline Find More Posts by mcart1956
Reply With Quote
Old Jun 15, 2003, 02:16 PM
GRAVITY... Just Say NO!
ArcherAce's Avatar
Toledo, OH
Joined Apr 2002
994 Posts
Hey, DW where did you get that cool cowl? Looks like the bottom of a pop bottle.
ArcherAce is offline Find More Posts by ArcherAce
Reply With Quote
Old Jun 15, 2003, 08:30 PM
D W
I love you man.
D W's Avatar
United States, NY, Pelham
Joined Sep 2002
2,743 Posts
AA,
searched far and wide and this fits perfect:
D W is online now Find More Posts by D W
Reply With Quote
Old Jun 15, 2003, 08:35 PM
D W
I love you man.
D W's Avatar
United States, NY, Pelham
Joined Sep 2002
2,743 Posts
Painted inside so it is bulletproof. Attached with two pieces of spongy foam, covered with small square of lite-ply. Glued on either side of plane and cowl screwed to them. Foam needs to be spongy, kinda like stuff they make kids flip-flops out of, so you can squeeze cowl over them. No failures at all yet even though fuse has taken a beating!
-David-
D W is online now Find More Posts by D W
Reply With Quote
Old Jun 15, 2003, 09:49 PM
What crash???
Alex W.'s Avatar
Albuquerque, NM
Joined May 2003
179 Posts
Very creative DW, nice job. That really gives the switchback that extra something it needs!

-Alex
Alex W. is offline Find More Posts by Alex W.
Reply With Quote
Old Jun 23, 2003, 04:50 PM
Blissfully Ignorant
Biggles604's Avatar
Port Moody, BC, Canada
Joined Oct 2002
235 Posts
Well, I took it out for it's new maiden last night and it worked fine, I was going to post pictures but didn't bring my camera. I took it out at lunch today, nice and warm, no wind, and after about 10 minutes of flight, the plane suddenly flipped and piled into the ground. I wasn't doing any aerobatics, and there is only three possible scenarios for what happened:
1: Sudden gust of wind, there were a couple while I was flying, but they didn't seem bad.
2: The 3d wing spacers that are supposed to be glued to the fuse, were glued to the wing so I can fly both wings, I noticed that one of them had broken free.
3: At the exact moment that I went out of control, there was a park maintenance guy, who fired up his lawnmower (Does that cause noise?)

Oh well... How many times can you re-build a SB?
Biggles604 is offline Find More Posts by Biggles604
Reply With Quote
Old Jun 23, 2003, 05:00 PM
wild in the park?
wherndon's Avatar
McDonough, GA
Joined Mar 2003
1,614 Posts
Some types ignitions can cause RF interferance.
I remember when I was a kid, I had a shortwave radio.
Sometimes the radio would emit a popping sound as a car passed by. Dad said it was the spark plugs firing.

Why is it I can remember something 40 years ago, but not what I did a week ago?

Sorry about your SB,
Bil
wherndon is offline Find More Posts by wherndon
Reply With Quote
Old Jun 23, 2003, 05:11 PM
characters welcome!
Mark Wood's Avatar
United States, CA, Bear Valley Springs
Joined Feb 2000
26,140 Posts
According to Doug, the 3D spacers indeed go on the wing otherwise, how would you be able to switch wings? Hence the plane's name.

mw
Mark Wood is offline Find More Posts by Mark Wood
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
What Was that beautiful sailplane at MWE? Roger P Electric Sailplanes 16 May 07, 2004 12:55 PM
What was that great paper planes site again ? NetForce2K Foamies (Kits) 1 May 01, 2002 11:01 PM
What was that great jet paper planes site again ? NetForce2K Electric Ducted Fan Jet Talk 3 May 01, 2002 10:19 PM
What was that paper planes site again ? NetForce2K Parkflyers 1 May 01, 2002 06:50 PM