its all here in this thread start about page 100 and work your way up

Originally Posted by 0031nihat

Dear Friends,
LX F-22,twin 2x70mm EDF is my first EDF,I have Spektrum DX7 and AR7000 to setup.
Could you please tell me how can I setup step by step ,ELE+AIL+TV+Air brakes flaps.
Thank you in advance for your kind help.
Nick

No offense Nick but if you look in the main page you can find the LX F-22 thread. They can help you out for sure.

Well in my pure obsession (ya I've got issues) to make this bird a bit more scale looking and more slippery in the air, I've decided to smooth out the nozzles for better airflow and appearance.

1) Cut out cardboard strips
2) Glue strips to nozzles
3) Paint

Not a very huge mod but I think this will benefit speed and outright looks. I've still got to paint the ring silver as shown in the picture of the real Mig-29 but it doesn't get easier than this...

oh great now when you go over 110mph you are going to say it was your nozzle mod LOL!!!

just kidding, its looks great Glen

John

Originally Posted by jcdfrd

oh great now when you go over 110mph you are going to say it was your nozzle mod LOL!!!

just kidding, its looks great Glen

John

LOL!! Yup that will be it. Without the mod...88mph. With the mod...199mph ahahah.

isn't that preventing the TV movement?

do you need the TV can you fly with out it? faster with out maybe?

ofcourse you can fly without it.. not faster . it's the same thing if you got thrust tubes but why disable it anyway?

only have an 8ch control Turnegy 9X so some thing has to give i guess.

this is what i was thinking below

CH 1, 2, 3, 4 control surfaces and esc
5 gear
6 flaps on the rotate thingo
7 smoke
8 drag chute

whats every one else running there set up as? maybe the lights can run all the time?

I removed the drag chute and smoke simply because they are cool but a bit silly. I also sealed up my flaps/slats (they look functional on my model but aren't) as the plane lands so slowly without them that I wanted to save the weight.

I use 7 channels total

Tho) Throttle
Ail) Ailerons (on a Y cable)
Ele) Elevator Right
Rudd) Rudders and steering
Gear) Retracts
Aux 1) Nose wheel gear door
Aux 2) Elevator Left

Originally Posted by spyda00

only have an 8ch control Turnegy 9X so some thing has to give i guess.

this is what i was thinking below

CH 1, 2, 3, 4 control surfaces and esc
5 gear
6 flaps on the rotate thingo
7 smoke
8 drag chute

whats every one else running there set up as? maybe the lights can run all the time?

does it work well if you delta mix the elevator and aileron like the real MIG or to much control surface?

Originally Posted by jcdfrd

its all here in this thread start about page 100 and work your way up

Thank you very much for your kind reply but could you give me a correct adress to find it please?
Nick

Originally Posted by Pepperpete

No offense Nick but if you look in the main page you can find the LX F-22 thread. They can help you out for sure.

Thank you very much for your kind reply but could you give me a correct adress to find it please?
Nick

Here is a thread on the LX F-22

http://www.rcgroups.com/forums/showt...hlight=lx+f+22

Originally Posted by 0031nihat

Thank you very much for your kind reply but could you give me a correct adress to find it please?
Nick

Originally Posted by spyda00

does it work well if you delta mix the elevator and aileron like the real MIG or to much control surface?

actually I think this is a good model for tailerons. we are flying one with conventional setup and ailerons are small and sluggish I have been thinking about setting it up to get roll rate a little crispier

John