HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by Herb, who may elect to delete unwanted replies.
Old Feb 17, 2011, 07:08 PM
Put a bigger motor on it!
gtfreeflyer's Avatar
Costa Mesa, CA
Joined Feb 2007
1,394 Posts
Very cool. Will you be flying it at Fairview, or are you only flying at Prado with the runway? Last time I was at Fairview, 2 weeks ago, there were blotches of grass scattered along the landing area. Do you know if they cut it down since then?

If you need any special electronics for your plane, perhaps a fail-safe for the drag chute or something like that, let me know and I'll see what I can come up with. I think it would be good to have some sort of fail-safe that requires you to toggle the switch 2-3 times in a given short period of time to deploy the chute, so you don't do it inadvertently in the air. You can even require the landing gear to be down in order to be able to deploy the chute. I could do this pretty easily... once I find some free time. I ordered a ton of extra electronic components, servo pins, and micro controllers when I built my Corsair's landing gear fail-safe. I have nothing left to do with the components now. They are just sitting around, and out in the garage since I had to "babyproof" the house, lol
gtfreeflyer is offline Find More Posts by gtfreeflyer
Reply With Quote
Sign up now
to remove ads between posts
Old Feb 18, 2011, 05:32 PM
Lithium Member
Herb's Avatar
Irvine, Calif USA
Joined Feb 1999
12,158 Posts
Thanks Jonathan for the offer I will look into it.

As it is, I already have a few switches (gear, flaps) and only so many hands ...

I think the chute could go, like brakes on some edfs & turbines, via mixing on the elevator channel (full elevator down = brakes on).

For now it will fly at Prado till I can see how slow it can land ... I think one should be able to fly it pretty slow (see eg the Airworld MiG-21 turbine videos on youtube) - but these things take time and there's no point in rushing and risk a vicious tipstall ....

Yes those nice grass blotches on the side of the "runway" are still there, so better keep an eye on that white centerline Other than that it's pretty nice/green - and a lot closer to my house ...
Herb is offline Find More Posts by Herb
Reply With Quote
Old Feb 22, 2011, 09:39 AM
High Altitude Specialist
snivilous's Avatar
Joined Jan 2010
867 Posts
Nice jet. I'm designing (soon to be built) a 30% A-37, and this will help me a lot for reference! Good landing too dude
snivilous is offline Find More Posts by snivilous
Reply With Quote
Old Apr 12, 2011, 05:07 PM
Lithium Member
Herb's Avatar
Irvine, Calif USA
Joined Feb 1999
12,158 Posts
... it flew very well with twin gyros on the ailerons and rudder

Now I need more packs ...
Herb is offline Find More Posts by Herb
Reply With Quote
Old Apr 23, 2011, 10:30 AM
Lithium Member
Herb's Avatar
Irvine, Calif USA
Joined Feb 1999
12,158 Posts
MiG-21 gyro bay

.
Herb is offline Find More Posts by Herb
Reply With Quote
Old Apr 23, 2011, 11:15 AM
Put a bigger motor on it!
gtfreeflyer's Avatar
Costa Mesa, CA
Joined Feb 2007
1,394 Posts
Which gyros did you end up going with?
gtfreeflyer is offline Find More Posts by gtfreeflyer
Reply With Quote
Old Apr 23, 2011, 03:38 PM
Lithium Member
Herb's Avatar
Irvine, Calif USA
Joined Feb 1999
12,158 Posts
Jonathan, these :

http://store.alshobbyshop.com/browse...iezo-Gyro.html

I've had them for years and they are, in spite of the price, very rugged and dependable.

I also had three more small ones of a different brand

http://www.hobbypartz.com/60p-dy-1018.html

that are adjustable rate (via transm) and w. heading lock that can be turned on or off, and did not like those at all !! ... they seemed overly crazy twichy.

I also bought four of these and these seem to work just as well as the MPG-6's, perhaps slightly nicer (servo centering light):

http://www.hobbyking.com/hobbyking/s...idproduct=9095

On the jets I actually prefer the ones were the gain is adjusted on the ground, less chance of some major f*up taking off eg with wrong rate ... In the MiG-21 I started on a fairly low rate (40% gain or so).

I have now one installed in my 50-sized NP Spitfire (rudder) that has a bit of a groundhandling problem (but surprisingly only on asphalt runways ).

This old Fuzzy German-made (ACT or Icarus?) fancy one for now I am saving for something else :

.
Herb is offline Find More Posts by Herb
Last edited by Herb; Apr 24, 2011 at 01:52 PM.
Reply With Quote
Old Apr 23, 2011, 10:26 PM
Put a bigger motor on it!
gtfreeflyer's Avatar
Costa Mesa, CA
Joined Feb 2007
1,394 Posts
Cool, glad I'm not the only one flying gyros on my airplanes at Fairview any more. It's been a while since I've flown though... probably since last time you saw me. I've been working a bunch of hours each week since then on a really cool RC project that I'll tell you about offline when I see you next.

Got any new videos of the Mig-21? Any onboard videos?
gtfreeflyer is offline Find More Posts by gtfreeflyer
Reply With Quote
Old Apr 24, 2011, 01:49 PM
Lithium Member
Herb's Avatar
Irvine, Calif USA
Joined Feb 1999
12,158 Posts
Oh I flew the A-4 with the above gyro six years ago ... but I did not find it that useful - until lately when they started to become vey inexpensive ... Fumbling with the gain adjustment knob on a fast jet was not to my liking.

Did you play around lately with heading lock gyros in an airplane ... there's a bit of a thread on RCU but I can't tell if they found it useful or not (on the rudder channel for takeoff) ... to me it seems a bit risky.

.
Herb is offline Find More Posts by Herb
Reply With Quote
Old Sep 14, 2011, 03:09 AM
Lithium Member
Herb's Avatar
Irvine, Calif USA
Joined Feb 1999
12,158 Posts
Took a few pictures of the real one last week at the Air and Space Museum in le Burguet outside Paris.

The real MiG-21 looks quite a bit smaller than I expected, half the size of a Rafale or Mirage 4000.

The one below is acutally an earlier model, I think it's an F-13 (Fishbed C, built under licence in Czechoslovakia) and not a Fishbed J/MF.

.
Herb is offline Find More Posts by Herb
Last edited by Herb; Sep 21, 2011 at 12:46 PM.
Reply With Quote
Old Sep 18, 2011, 11:07 PM
Registered User
SergeyK's Avatar
United States, NY, Kings
Joined Feb 2006
864 Posts
Quote:
Originally Posted by Herb View Post
The one below is acutally a later model, I think it's an MF and not a J.
.
Judging by the canopy and the very low ridge behind it and also the narrow air intake, it is one of the earliest modes.
SergeyK is offline Find More Posts by SergeyK
Reply With Quote
Old Sep 21, 2011, 12:50 PM
Lithium Member
Herb's Avatar
Irvine, Calif USA
Joined Feb 1999
12,158 Posts
Yes you are right, it's the other way around

I was surprised at how small the MiG-21 was say compared to the Rafale A and the Mirage 4000, which are real monsters.

.

A Visit to Le Bourget Air and Space Museum (2011) (3 min 14 sec)
Herb is offline Find More Posts by Herb
Reply With Quote
Old Feb 17, 2012, 10:26 PM
A Texan abroad
torque roll's Avatar
Joined Oct 2011
936 Posts
fabulous job! what is the wingspan/length?
torque roll is offline Find More Posts by torque roll
Reply With Quote
Old Feb 18, 2012, 11:05 AM
Lithium Member
Herb's Avatar
Irvine, Calif USA
Joined Feb 1999
12,158 Posts
Hi, Thanks !

The scale is close to 1:8, so the model wingspan is ca. 89cm and the length ca. 2m.

I believe these are the same plans , for Kress RK-740 fan (4'' or 100mm diam) :

http://www.ebay.com/itm/RC-plans-Pat...#ht_787wt_1029

There it lists the wingspan & length at 35'' and 88''.
Herb is offline Find More Posts by Herb
Reply With Quote
Old Mar 19, 2012, 06:40 PM
Registered User
United States, CA, Fresno
Joined Mar 2012
7 Posts
F-86

I wonder if this fan would fly a JHH F-86. What do you think?
Jricco is offline Find More Posts by Jricco
Reply With Quote
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log MiG-21 "Fishbed" Park Jet beanie Pusher Prop Jet Models 3251 Jul 11, 2014 07:21 PM
Mini-HowTo Mig-21 Fishbed Build cdebaca Pusher Prop Jet Models 152 Aug 16, 2006 09:06 PM
Mig-21 "Fishbed" Fanfold Build J Morgan Pusher Prop Jet Models 188 Nov 04, 2005 12:12 AM
Help with CG on Mig-21 "Fishbed"? J Morgan Electric Ducted Fan Jet Talk 5 Jul 06, 2005 07:55 PM
MIG-21 FishBed leesops Electric Ducted Fan Jet Talk 22 Sep 13, 2003 12:31 PM