 |
 |
 |
|
Mar 12, 2010, 08:32 AM
|
|
|
Estonia
Joined Dec 2009
6 Posts
|
Well i had same problem but accidentally got the upgrade to work. I had problem with OSD firmware upgrade. eLogger Application version 8.35 shows "OSD PRO firmware UNKNOWN". If i push the upgrade putton it starts to upgrade and gives message as upgrade is successful but it was not. I managed to get even error code 128.
But i got upgrade by accident. OSD PRO must be activated by eLogger application and then firmware can be upgraded. Choose "Hardware" > "Parameters to Display on Video OSD". Application then asks to upgrade firmware and this time it upgrades it. Just for info. I could not see this solution in RC groups forum. Maybe this helps someone. |
|
|
|
|
|
Apr 29, 2010, 05:28 AM
|
|
|
Joined Mar 2009
3 Posts
|
Hello! when i connect GPS expander to V3 elogger all the parameters vanish but the video picture is still there. with out connecting GPS expander i can see all the parameters. can someone please help.
|
|
|
|
|
Jun 27, 2010, 11:55 AM
|
|
|
Neuchatel, Switzerland
Joined Jun 2009
8 Posts
|
Hello,
Thanks Kleemann, I had the exactly same problem ("OSD PRO firmware UNKNOWN") and it works for me ;-) Regards, André |
|
|
|
|
Jun 27, 2010, 09:10 PM
|
||
Omsk,RU
Joined Dec 2008
796 Posts
|
Quote:
har-ness har-ness /*hurrah!!!*/  (use battery backup harness because elogger`s supply is not enough for GPS) |
|
|
|
|
|
|
Jun 29, 2010, 06:18 AM
|
|
|
Ireland
Joined Apr 2001
3,954 Posts
|
connect one of the ods servo inputs to 5 volt like it would be powered when connected to a reciever.
I had a power issue and this resolved it. |
|
|
|
|
Jul 03, 2010, 11:20 AM
|
|
England
Joined Apr 2010
181 Posts
|
Thanks Kleemann,
Been trying to get the OSD working for about an hour, thought it was a dead unit. Seems to be working fine now. good fix! |
|
|
|
|
Dec 13, 2010, 01:28 PM
|
|
Turin (Italy)
Joined Dec 2010
20 Posts
|
Thanks a lot,
got the same problem, solved with the same Kleemann solution. |
|
|
|
|
May 26, 2012, 07:29 AM
|
|
Kaunas, Lithuania
Joined Oct 2007
1,483 Posts
|
I have issue with updating
 the OSD Pro.As you see, The OSD version isn't recognized at all. Whole system is over 1 year old. Had same difficulties with V3 logger, but after few times it just updated and firmware version is OK now. Just OSD can't do anything. Get error in few seconds. Any help will be useful! Virgis P.S. sorry for messy picture 
|
|
|
|
|
Jun 02, 2012, 02:59 PM
|
|
Joined Nov 2003
4,787 Posts
|
Hi Virgis,
This is a USB connectivity problem I believe. I would recommend trying a different PC, or trying a USB hub, to see if that resolves it. Additionally, please see the suggestions above about backup power. If this still doesn't resolve it, it's possible that the eLogger V3's USB interface is failing. |
 |
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Discussion eLogger V3 + GPS v3 + OSD Pro problem | ragamofyn | Eagle Tree Systems | 8 | May 06, 2010 01:43 AM |
| Sold Eagle tree osd pro elogger v3 gps expander v3 | Squatter | Aircraft - Electric - Miscellaneous (FS/W) | 2 | Nov 27, 2009 09:12 PM |
| Sold Eagle tree osd pro elogger v3 gps expander v3 | Squatter | Aircraft - General - Miscellaneous (FS/W) | 14 | Nov 27, 2009 08:58 PM |
| Discussion problem--New elogger v3, osd, gps | edragon | Eagle Tree Systems | 3 | Aug 19, 2009 08:59 PM |
| Discussion Problems with 5Hz GPS Expander V3 and eLogger V3! | Geni | Eagle Tree Systems | 7 | Aug 14, 2008 12:08 AM |
|
|