HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jan 16, 2010, 12:06 PM
Rejected User
Mchone, Jake's Avatar
Joined Dec 2003
6,572 Posts
New Product
Pilot RC's SBach 342 30cc!!

My newest plane for IMAC and freestyle 3D compitition is Pilot RC's new 30cc 26% CF Sbach 342!

A scale model with the scale scheme (which matches my Skybolt)


Professionally designed for 3D and precision aerobatics
Professionally covered in Oracover(Ultracote)
Cowl with cowl ring; No exterior screws exposed!
Complete hardware included
Removable wings, stabs and rudder!
Laser cut engine mounting templates to accept .91-1.20 (2C); 1.10-1.40 (4C); 24-32cc Gas engines
Aluminium hub tires included!
Carbon Fiber wing and tail tubes, landing gear, tailwheel and painted CF spinner to match the scheme!

Pre-Installed Components are:
Hinged wings, stabs, Fin and Rudder
80* of throw on the elevators and ailerons!
Installed fuel tank
Mounted and painted Canopy and scale 2 place cockpit with panels.
Drilled control horns with beautiful translucency color
Installed pull pull wire with ball links on rudder
Installed push rods with Ball links for ail. and elevs.

All for less than $400 from Chief Aircraft!

Specifications:
Wingspan: 73" (1.85m)
Wing Area: ~1180 sq in (7612 sq cm)
Length: ~65" (1.65m)
Flying Weight: ~11 lbs (5kg)
Engine: 30cc rec.

I've been flying everyday for about a year now practicing 3D and IMAC with my QQ Yak(for how long that lasted), profiles and my Fliton Extra 330. Im no pro, but I think im ready to start going to compititions so I can progress as a pilot, both in RC and fullscale. I've been offered full-scale aerobatic instruction and can't pass it up and flyign IMAC would certainly help sence IAC and IMAC fly the exact same maneuvers.

I've been practicing the IMAC Basic and Sportsman sequences and plan on attending LMAC's IMAC this year. So I need somethign to compete with sence my Extra is a bit small.

This will be my first gas plane, as well.

Check it out! http://www.chiefaircraft.com/rcmsec/...C/SBach26.html
Mchone, Jake is offline Find More Posts by Mchone, Jake
Reply With Quote
Sign up now
to remove ads between posts
Old Jan 16, 2010, 12:06 PM
Rejected User
Mchone, Jake's Avatar
Joined Dec 2003
6,572 Posts
How about a DLE 30cc for power?
http://www3.towerhobbies.com/cgi-bin...?&I=LXYUS4&P=0

The DLE 0 is what is recomended, but looking closely at the specs it only produces 17-18lbs of thrust. Not much for an 11lbs 3D plane. The DLE weights about 2.5lbs with muffler and ignition.

btu I did find a cheaper 42cc MT engine that is 3.7lbs with muffler and ign. It produces 21lbs of thrust swingign the same 20x8 prop, which is more like it!

Would that extra pound on the nose be too much?
http://cgi.ebay.com/Christmas-Specia...item20ae10ab96

Also, im not sure of the torque. How much torque do I need for a 30cc? 150oz, 200oz??
Mchone, Jake is offline Find More Posts by Mchone, Jake
Reply With Quote
Old Feb 02, 2010, 10:03 AM
Spring warmth will soon arrive
cryhavoc38's Avatar
United States, WA, Woodinville
Joined Mar 2007
8,006 Posts
I know of a dealer who will be priced at $350 shipped for the new Sbach342 and MXS planes.
cryhavoc38 is offline Find More Posts by cryhavoc38
Reply With Quote
Old Feb 02, 2010, 01:01 PM
Rejected User
Mchone, Jake's Avatar
Joined Dec 2003
6,572 Posts
I've given up on The SBach after a local guy offered me a kit built (forgot the brand) 30% 50cc Edge 540. I seen it fly everytime it flew and it always few great 3D. $1200rtf, which is what I can build the SBach for. But thanks for the info incase I can get one later.
Mchone, Jake is offline Find More Posts by Mchone, Jake
Reply With Quote
Old Feb 06, 2010, 07:01 PM
Registered User
dduplice's Avatar
Joined Jan 2005
5 Posts
Just ordered 30% Sbach and DLE-55 from larry @ chiefaircraft, good combo price. but I am going to be using my DA-50 on it. Planning on getting a Pilot-RC or TOC- Thunder Tiger 30% Yak for the DLE. I am thinking about doing a build thread on the Sbach.
dduplice is offline Find More Posts by dduplice
Reply With Quote
Old Feb 06, 2010, 09:43 PM
Rejected User
Mchone, Jake's Avatar
Joined Dec 2003
6,572 Posts
Please let me know if you do!

I might still get one of these later and would love a build thread refrence, or atleast a good flight report.

I'll probably crash the Edge before next season (I like my 3D low and hard) and the 30% would be a great replacment airframe for the DA50 and servos from the Edge!
Mchone, Jake is offline Find More Posts by Mchone, Jake
Reply With Quote
Old Feb 10, 2010, 04:50 PM
Registered User
dduplice's Avatar
Joined Jan 2005
5 Posts
Pilot-RC 29% Sbach

Just came today from chiefaircraft. No problems with shipping packages. and so far so good. Hope to start a build thread soon.

Dennis D
dduplice is offline Find More Posts by dduplice
Reply With Quote
Old Feb 10, 2010, 05:58 PM
Rejected User
Mchone, Jake's Avatar
Joined Dec 2003
6,572 Posts
YAY! Looks beautiful!

Makes me wish I hadn't baught that Edge, guess i'll have to sacrifice it soon to I can get a new airframe!
Mchone, Jake is offline Find More Posts by Mchone, Jake
Reply With Quote
Old Feb 27, 2010, 10:19 AM
Registered User
USA, NH, Bedford
Joined Oct 2009
423 Posts
Does it have a pipe tunnel? I am looking for an airframe for my Syssa 30 with a ES composites pipe.
ghoffman is offline Find More Posts by ghoffman
Reply With Quote
Old Feb 27, 2010, 10:34 AM
Rejected User
Mchone, Jake's Avatar
Joined Dec 2003
6,572 Posts
It doesnt have a place for a pipe, but its already cut for canister mufflers, so it probably wouldn't be hard to mod it to make a pipe fit.
Mchone, Jake is offline Find More Posts by Mchone, Jake
Reply With Quote
Old Mar 09, 2010, 11:11 AM
Lost at LAX
Old Fart's Avatar
United States, CA, Torrance
Joined Dec 2005
2,553 Posts
C'mon Jake - we need more pictures! (Mine won't be here til late April)
Old Fart is offline Find More Posts by Old Fart
Reply With Quote
Old Mar 09, 2010, 01:59 PM
Rejected User
Mchone, Jake's Avatar
Joined Dec 2003
6,572 Posts
I haven't purchased mine yet. All my $ is wrapped up in working on a 50cc Edge at the moment.
Mchone, Jake is offline Find More Posts by Mchone, Jake
Reply With Quote
Old Mar 09, 2010, 02:24 PM
Lost at LAX
Old Fart's Avatar
United States, CA, Torrance
Joined Dec 2005
2,553 Posts
Aack - that Q was meant for dduplice..


That's what I get for trying to cram a weeks work (plus important RC Internet stuff!) all in the day before I leave for vacation

Never built a 30CC 3D plane, are digital servos necessary? I have plenty of warbirds this size, plain old HS645MG's work fine.
Old Fart is offline Find More Posts by Old Fart
Reply With Quote
Old Mar 09, 2010, 04:02 PM
Rejected User
Mchone, Jake's Avatar
Joined Dec 2003
6,572 Posts
I havent either, but I do know that digitals are not nessisary, but MGs are. As long as your servo makes atleast the recomended torque and is fast enough for 3D because to fly 3D well, your servo needs to go from one extreme end point of throw to the other very quickly. And digitals I understand make the torque nessisary emediatly and hold the control surface there exactly much better than a standard servo, atleast thats my understanding.

For a 30cc sized 3D plane you need about 150oz of torque from your servo.
Mchone, Jake is offline Find More Posts by Mchone, Jake
Reply With Quote
Old Mar 09, 2010, 04:18 PM
Lost at LAX
Old Fart's Avatar
United States, CA, Torrance
Joined Dec 2005
2,553 Posts
LOL - except for use with small electric foamies, I don't own anything but MG servos anymore.

150oz puts me one level up from 645MG's (985MG..), or HD1501's if I stay analog. Could always run DS120M's if I wanted digital.
Old Fart is offline Find More Posts by Old Fart
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Cool Sbach 342 - The wait is over!! FINALLY RC! rcxmachines Giant Scale Airplanes 85 Jan 20, 2010 02:47 AM
New Product the first 100cc Sbach 342 in the world(pics and video) pilot-rc Giant Scale Airplanes 0 Sep 18, 2009 06:03 AM
Video Sbach 342 - The wait is over!! FINALLY RC! rcxmachines Fuel Plane Talk 0 Aug 21, 2009 01:29 AM
Discussion Two Seat Sbach 342 james-bai Fuel Plane Talk 1 Jul 21, 2009 12:05 AM
Discussion Sbach 342 power system? 150grams BpPilot Indoor Pattern/F3P 5 Apr 11, 2009 08:06 PM