I finally got some video of the 40 inch extra 330sc vt! sorry I took so long

DW foamies 40"extra 330sc vt(vectored thrust) (3 min 53 sec)

nice flight. What servos are you using?

Originally Posted by DenverJayhawk

nice flight. What servos are you using?

thanks,im using HTX 900 all around and the metal gear version of the 900 for vectoring

and heres my new foavorite micro!!!!!its the micro DW cub with AS3X!!!! this little guy is a 3d cub!!!

DW foamies micro cub with AS3X! (4 min 39 sec)

Stock server arms on the HX T 900 Servos?

I love those HXT 900s. have them on a 450 heli, my DW and my (deceased) R.I.P. Stryker. Never a servo failure in almost 2 years, except for a Heli pitch servo (from a nasty crash). Great servos for the $$.

Originally Posted by santiago3d92095

thanks,im using HTX 900 all around and the metal gear version of the 900 for vectoring

What do you mean by vectoring?

are the stock servo arms on the hxt900 adequate for necessary throws on the 40" DW?

Originally Posted by DenverJayhawk

are the stock servo arms on the hxt900 adequate for necessary throws on the 40" DW?

I extended them a little to get that much throw,it actually dosent need that much throw on the ailerons.Im thinking of going back to the stock arms to get more torque and less deflection.

Originally Posted by Idoitall

What do you mean by vectoring?

vectoring for the motor

Originally Posted by mark_q

tripleup,

On the motor, the 2217-9 will work good but a much better motor is the 1100Kv version which is a 2217-8. I have heard DW sells the 1100 if you ask so you might want to consider this.

Thanks for the advice Mark. Does 60kv really make that much difference? I know very little about these electric motors, but I figured 60kv was negligible.

Originally Posted by santiago3d92095

what servos are you using?

HXT 900s all the way around.

if you want to extend the servo arm on the hxt 900, what do you use?

Was over at Mike's house yesterday checking out some new stuff he has in the works. I love his drive and creativity. He's constantly evolving his designs, updating them, improving the way they build, etc.

Can't wait to get my new 48" BAF soon.. Can't say what it is though.. Not yet anyway.

Originally Posted by dcronkhite

.. Can't say what it is though.. Not yet anyway.

now that's not very cool

Mike's a great guy. I wish he'd come out to Colorado for the Rocky Mountain 3D throw down. I'd love to meet him.

I'm almost done with the 48 yak 54. This thing is larger than it looks. Cannot wait to fly it.

Originally Posted by santiago3d92095

Heres something new I think you guys might like....micro vpp!!!Mike has been working on this for a while and its almost done.Right now it has a t-motor 1306 but I want to see if it will work with the smaller 1304.I was hoping to maiden it this weekend but wind was horrible so im going to have to wait a little more

As for the plane it is a 22 inch juka,2 gram servos servos all around.

Ohh I cannot wait for that! Micro VPP!!