|Dec 12, 2009, 05:07 PM|
High Aspect-ES 3.1M electro-glider #1
Ok starting on the Art Hobby High Aspect-ES 3.1M electro-glider hope to have it ready to go by spring.Then I will be looking for a soft grassy spot to fly,Living in Redding its hard to find such a place that has lots of open sky and soft grass.....It be built with ailerons and flaps too.
|Jan 28, 2013, 04:44 PM|
Well it's been some time since you posted this, is the glider still alive?
I own the High Aspect 3.1M and broke the pod a bit. Living in flat Chicagoland and flying mostly alone, the sandow is a bit of a hassle. The pod is fixable but I am considering an electric conversion, it seems ArtHobby sells many spare parts, including an electro-pod, spinner and all the good stuff.
In your blog I read about your set-up:
"MEGA MOTOR 22/30/3 .....and a CC Phoenix Ice Lite 75.....13x7 prop....Turnigy 2650mAh 3S 30C Lipo .....57oz with out batteries"
Were you happy with it and could you please elaborate?
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Airfoil for high aspect ratio wing, HP-18 glider||cgraf||Scale Sailplanes||18||Aug 04, 2009 04:58 PM|
|Discussion A mixed Low and High Aspect ratio flying wing glider design for thermalling||GreenAce92||Thermal||2||Mar 26, 2009 05:42 PM|
|Discussion Art Hobby High Aspect-E 3.1M electro-glider||bosco49||Electric Sailplanes||3||May 16, 2006 06:34 AM|
|Question Thaughts on the Art hobby High Aspect 3.1||ploof||Electric Sailplanes||3||Apr 25, 2006 12:13 AM|
|Discussion ArtHobby High Aspect RES-3.1m||csocso||Thermal||2||Jan 25, 2006 02:04 PM|