Pictures and Videos of Your Helis - Page 3

dze · Nov 05, 2009, 09:19 AM

I was completely wondering about head and tail rotational direction on those multi rotor head builds, looks like alot of people spin the works backwards to normal. So my main question on that to is if its somthing mechanically inherent and required for the head design or strictly a scale thing to be correct.

MakMov · Nov 05, 2009, 11:10 AM

Quote:

Originally Posted by dze

I was completely wondering about head and tail rotational direction on those multi rotor head builds, looks like alot of people spin the works backwards to normal. So my main question on that to is if its somthing mechanically inherent and required for the head design or strictly a scale thing to be correct.

Well on some head designs to get the correct phase and not binding you need flip the grips for clearance. But as far as the rest goes I think its just a scale thing.

dze · Nov 05, 2009, 01:02 PM

I can see that, ive been researching it some and plan on doing a build .. the phase thing looks like a pain and from all i can tell even with the 'flapper' head or whater its called it just about needs an electronic flybar to tweak the settings and phase to fly good .. i wont be content to scoot around in a near hover without one .. but i just dont know really, but sounds like it might be a little pricey

Kamov · Nov 05, 2009, 02:15 PM

i must be the weird one here as im the only one that have 2 helis

just installed a new canopy last night

To answer the question below...Its heli by Hirobo called the SRB Quark with an Esky robins canopy

.

FlyHeli? · Nov 05, 2009, 02:33 PM

Quote:

Originally Posted by Kamov

i must be the weird one here as i only have 2 helis

on this one i just installed a new canopy last night

Looks good. What heli is that?

Rich

Kamov · Nov 05, 2009, 04:05 PM

Quote:

Originally Posted by FlyHeli?

Looks good. What heli is that?

Rich

thanks its a Hirobo SRB Quark

here's my other one

plain old esky honey bee fp with some mods

Kyosho M24 Caliber Main rotor blades
GWS DD tail motor with gws 4530 prop
stock motor 9t
3s 11.1 800mah

mediclavina · Nov 06, 2009, 02:52 AM

Here's my "best in their class" fleet.

1Hammer · Nov 08, 2009, 05:30 PM

It's great to see so many great pictures here!

Here's my 4G3 with Mario's new MIA UPS Frame, double brushless (HP08/HP03T), dual Flea with Position Lights and Searchlight.

A very short video to show the lights.

Walkera 4G3 MIA UPS Frame with Navigation Lights. (0 min 51 sec)

1Hammer · Nov 12, 2009, 04:14 PM

Hi all,

Come on, I know there are a LOT of great heli pictures and videos out there!

Let's keep them coming.

Regards,
John

jasmine2501 · Nov 12, 2009, 04:25 PM

Hehe... this was freekin awesome! My best crash yet, and actually got it on video

http://www.youtube.com/watch?v=CwR-vakIMWc

41North · Nov 12, 2009, 06:24 PM

Crashed my Neon on it's 1st test hover flight. Should have known better than try it with a stripped tail tension screw... But I got it on video (18 MB .wmv file)

AtTheCross · Nov 12, 2009, 06:26 PM

Quote:

Originally Posted by 41North

Crashed my Neon on it's 1st test hover flight. Should have known better than try it with a stripped tail tension screw... But I got it on video (18 MB .wmv file)

why do we do that!!!! I've crashed on a test hover, because of something that I knew wasn't 'right' but that's not the part I was testing, but of course that is the part that leads to a crash!!!

mangonjb · Nov 12, 2009, 06:43 PM

Here's my small fleet, Though soon to be depleted as the MSR and the TT Innovator Expert are soon to go, leaving me with just the Mikado Logo 400 and the Hirobo Quark. That's all I will need in future, I would rather get to know two helis well than twenty helis a little.

41North · Nov 12, 2009, 06:53 PM

Quote:

Originally Posted by AtTheCross

why do we do that!!!! I've crashed on a test hover, because of something that I knew wasn't 'right' but that's not the part I was testing, but of course that is the part that leads to a crash!!!

Haha, no kidding. And the thing is, I never intend to do more than get them a few feet into the air & set them back down right away. But doggone it, the trims were just sooo close 1st time up on this one, I couldn't help myself. Busted one skid mount - I wanted Super-Skids on it anyway...

sky guy · Nov 12, 2009, 11:48 PM

http://www.youtube.com/watch?v=zE2n716MNEA

Nov 05, 2009, 02:15 PM	#34
Kamov Registered User Join Date: May 2007 Location: CA Posts: 856	i must be the weird one here as im the only one that have 2 helis just installed a new canopy last night To answer the question below...Its heli by Hirobo called the SRB Quark with an Esky robins canopy . Attached Thumbnails 120.4 KB · Views: 24 Last edited by Kamov; Nov 05, 2009 at 05:17 PM.

Nov 06, 2009, 02:52 AM	#37
mediclavina Quark, EP200V2se, E325se, mSR Join Date: Aug 2006 Posts: 388	The best in their respective classes Here's my "best in their class" fleet. Attached Thumbnails The best in their class 106.7 KB · Views: 107

Nov 12, 2009, 11:48 PM	#45
sky guy Registered User Join Date: Oct 2001 Location: Missoula, MT Posts: 408	MSR with scale Agusta A-109 body http://www.youtube.com/watch?v=zE2n716MNEA Last edited by sky guy; Nov 12, 2009 at 11:53 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gallery Bird Pictures Around Your Plane	outngo	Electric Sailplanes	25	Nov 13, 2009 09:08 PM
For Sale Parkzone Micro Citabria - Pictures Added!	bibbs68	Aircraft - Electric - Airplanes (FS/W)	0	Oct 14, 2009 07:13 PM
Gallery Post your full size autogyro pictures, for model building and flying inspiration.	rotorheid	Auto Gyros	10	Sep 29, 2009 06:34 PM
Show your Micro Pitts pictures.	Timmy	Indoor and Micro Models	14	Jan 15, 2003 06:49 PM

Nov 05, 2009, 09:19 AM	#31
dze Registered User Join Date: Jan 2008 Posts: 4,847	I was completely wondering about head and tail rotational direction on those multi rotor head builds, looks like alot of people spin the works backwards to normal. So my main question on that to is if its somthing mechanically inherent and required for the head design or strictly a scale thing to be correct.

Nov 05, 2009, 01:02 PM	#33
dze Registered User Join Date: Jan 2008 Posts: 4,847	I can see that, ive been researching it some and plan on doing a build .. the phase thing looks like a pain and from all i can tell even with the 'flapper' head or whater its called it just about needs an electronic flybar to tweak the settings and phase to fly good .. i wont be content to scoot around in a near hover without one .. but i just dont know really, but sounds like it might be a little pricey

Nov 12, 2009, 04:14 PM	#39
1Hammer Micro Helicopter Electrician Join Date: May 2008 Location: Central California Coast Posts: 783	Hi all, Come on, I know there are a LOT of great heli pictures and videos out there! Let's keep them coming. Regards, John

Nov 12, 2009, 04:25 PM	#40
jasmine2501 No hoovering! Join Date: Jul 2007 Location: Lakewood, CO Posts: 9,015	Hehe... this was freekin awesome! My best crash yet, and actually got it on video http://www.youtube.com/watch?v=CwR-vakIMWc

Nov 12, 2009, 06:24 PM	#41
41North Registered User Join Date: Jan 2008 Posts: 752	Crashed my Neon on it's 1st test hover flight. Should have known better than try it with a stripped tail tension screw... But I got it on video (18 MB .wmv file)

Nov 12, 2009, 06:43 PM	#43
mangonjb Hirobo Quark, Mikado Logo 400 Join Date: Sep 2008 Location: Nr Cardiff, S Wales Posts: 78	Here's my small fleet, Though soon to be depleted as the MSR and the TT Innovator Expert are soon to go, leaving me with just the Mikado Logo 400 and the Hirobo Quark. That's all I will need in future, I would rather get to know two helis well than twenty helis a little.