Originally Posted by selçuk

I have had more than 100 flights on my stock habu, which means more than 60 hours.
I wonder whether motor and electronics need any care.
Thanks.

new math!! 36 min flights ,what batteries are u using, i need some!!

Originally Posted by chas650r

new math!! 36 min flights ,what batteries are u using, i need some!!

HAHAHAHAHAHAHAAAAAAAA
I need some too

Ok. I forgot to put decimal. sorry.
I really want to learn, do motor or electronics need any care?
Thanks.

well all kidding aside, yes u can re move the motor and lightly oil the bearings but in doing so u may cause more problems than u are preventing. the fan must be disassembled to access the bearings and if if runs smooth now and or u are not used to fan work, u may not want to go there.

as far as the rest of the plane goes , many have changed servos , but again , its working well , imo dont mess w/ it.

when i get to the place u are at i just fly the plane like i stole it, then , usually i create something to fix.

chuck.

Im new to EDF Jets, I'm buying a brand new Habu this Friday.. super excited!! Any suggestions on retracts I should get? Should I get struts with them? Please leave a comment with brand name, sizes, etc and/or website.

And whats the alternative to the brightest afterburner led set up without killing your pockets with a hyperdyne lab brand one?

You better stock up on habu parts if you are just now getting one. They are about to be discontinued.

I just got my hobbywing 100a esc today. Hope to try it out tomorrow!

Originally Posted by nickelbn1

You better stock up on habu parts if you are just now getting one. They are about to be discontinued.

I just got my hobbywing 100a esc today. Hope to try it out tomorrow!

they are gonna discontinue habu parts? i know the jet is discontinued, but the part are gonna be too?

Not yet, I don't think. I believe the PNP will continue (but is on backorder right now). That said, if they're canceling some portions of the Habu, it's only a matter of time until they can the whole thing.

Parts are available, but both PNP and BNF are discontinued. I hope this means they have another Parkzone EDF coming soon!

Originally Posted by tclaridge

Parts are available, but both PNP and BNF are discontinued. I hope this means they have another Parkzone EDF coming soon!

yes I have the last pkz habu on hold for me, I'm gonna pick it up tommo thank God !!!

Hey Guys,

Here is the first flight of a new setup.

Enjoy!

High Perfomance Fan with Change Sun 10-blade in Development, First Flight (4 min 54 sec)

What motor, esc and battery are you using? Where did you get the 10 blade fan? How many amps?

Originally Posted by Heli Copter

Hey Guys,

Here is the first flight of a new setup.

Enjoy!

http://www.youtube.com/watch?v=-Pq0g9HFNWY

very nice!! what are you running? and what size li po? that thing can move

Originally Posted by Trammellc2001

What motor, esc and battery are you using? Where did you get the 10 blade fan? How many amps?

Originally Posted by Noob Pilot Coop

very nice!! what are you running? and what size li po? that thing can move

Motor: E-flite BL32 inrunner
Battery: nanotech 6S 3300 35C
Fan Blade: Change Sun 70mm from Hobby King
ESC: Phoenix Ice 100 Lite
Running 80-85 Amps, 1800-2000 watts, 40,000-41,000 rpm's

Originally Posted by Heli Copter

Motor: E-flite BL32 inrunner
Battery: nanotech 6S 3300 35C
Fan Blade: Change Sun 70mm from Hobby King
ESC: Phoenix Ice 100 Lite
Running 80-85 Amps, 1800-2000 watts, 40,000-41,000 rpm's

That's just 😷 I think I just went into shock, I'm drooling and can't stop.. heli great job that's an awesome set up