Any ideas on this charger problem? My charger won't calibrate.

Thunder AC6 Charger not calibrating 1 of 3 (9 min 20 sec)

you may have a faulty unit?
Or a faulty set of lipos
http://www.nitrorcx.com/thac6lichse.html

welp i went down to my LHS and sure enough they had what I needed!

Tail servo and ESC are in and mounted. Last on the list, batteries, motor, receiver and gyro.

I might just end up going with the OrangeRX line of servos, based off the opinions of the local flying guys around here.

Originally Posted by Sabin

Tail servo and ESC are in and mounted. Last on the list, batteries, motor, receiver and gyro.

I might just end up going with the OrangeRX line of servos, based off the opinions of the local flying guys around here.

Keep us posted Sabin

I got 3 new lipos and they are fine, so I'll have to check with them, but will wait until next week when everyone is back at work. It looks like the charger is bad so I just stopped using it for now. It's the only charger I have at the moment.

Originally Posted by pitchp

you may have a faulty unit?
Or a faulty set of lipos
http://www.nitrorcx.com/thac6lichse.html

Here's another interesting video, as if helicopters were not scary enough as they are. Now they prove it can cut your arm off too... I know they always could, but the sound the larger helis make kind of scares me too.

ALIGN New Torque Tube Drive Gear Coming soon! (7 min 7 sec)

Interesting mount for the heli- clamping plate and pillars from an injection mould.

Guys check this out! I finally got my quark!!!! Super fast delivery! All i'm waiting for now is the cables! And it's all good!



I hope this is a true mems gyro. lol In any case this should do me fine for flips and rolls kinda flying.

Pitchp, I have the Quark with my 450 size heli and the tail is rock solid to pair with Align DS520.
Please share your comment once you have tested on the 250 heli. Can't wait to find out if it is good to move my Quark to the 250 heli.

guys our friend esco with his 250 heli

Trex 250 Pro 3D in the street (8 min 37 sec)

Originally Posted by daddoo

Pitchp, I have the Quark with my 450 size heli and the tail is rock solid to pair with Align DS520.
Please share your comment once you have tested on the 250 heli. Can't wait to find out if it is good to move my Quark to the 250 heli.

will do

guys i know some of you are flying your 250 indoors, i know it's kool to do as i have also done it before, but i have stopped doing that, and I still see a lot of people flying their 250 indoors, i just want to say it is dangerous to fly a 250 indoors. just like this guy here

T REX 250 (1 min 54 sec)

just take care out there guys

Originally Posted by efx

Here's another interesting video, as if helicopters were not scary enough as they are. Now they prove it can cut your arm off too... I know they always could, but the sound the larger helis make kind of scares me too.
http://www.youtube.com/watch?v=KZtdM...ure=watch-vrec

Amazing

250 clone with a Gens Ace lipos

Helicopter size 250 . Gens Ace Lipo 3s1p with 800maH and only 20C "ON AIR " (4 min 24 sec)