Short Sunderland (based on the plan from P.Angus) - Page 2

Rudi · Sep 22, 2009, 01:07 AM

Hi Walter, hi Phillip,

many thx. FYI my wife is so angry about me because me building speed increesed from project to project

and my storage place is limited

.
Never the less what should I do, I am a "model building junky"

O.K guys,

yesterday I started with the center wing . More to come . OPs.... I have forgotten that I plan to use the sunderland (in oposite to Peter Angus) in his initialy element, water

Rudi

Rudi · Sep 23, 2009, 12:33 AM

go with the wings last night with the wings .(not much because I mentioned that there are 4 rips missing in the part drawings from Peter Angus)

Rudi

balsaleiste · Sep 23, 2009, 12:49 AM

Which rips are missing?

Rudi · Sep 24, 2009, 01:07 AM

Quote:

Originally Posted by balsaleiste

Which rips are missing?

Hi Balsaleiste ,
8-12 but to be honest I found it in the meantime in Peter Angus thread. In my original zip downloadfile this one file is missing ?

Never the less now I have all templates I need and the build can go on. I plan to post more of the progress during the day.

Many thx

Rudi

Rudi · Sep 24, 2009, 04:16 AM

O.K as promised here are the wings with the "missing2 rips. More to come

Rudi

Rudi · Sep 25, 2009, 02:52 AM

started with wiring

Rudi

balsaleiste · Sep 25, 2009, 03:01 AM

Quote:

Originally Posted by Rudi

Hi Balsaleiste ,
8-12 but to be honest I found it in the meantime in Peter Angus thread. In my original zip downloadfile this one file is missing ?

Never the less now I have all templates I need and the build can go on. I plan to post more of the progress during the day.

Many thx

Rudi

Sheet 21 ist the plan with the rips 8 - 12. It is in the zip-file.
I checked straight again.

Hast mir aber ebend einen großen Schrecken eingejagt.

Rudi · Sep 28, 2009, 03:05 AM

Quote:

Originally Posted by balsaleiste

Sheet 21 ist the plan with the rips 8 - 12. It is in the zip-file.
I checked straight again.

Hast mir aber ebend einen großen Schrecken eingejagt.

Hi balsaleiste ,

never the less I was going on with the wings and the wooden enginemounts. I sealed them with "Bona parketversiegelung". I plan to make the swimmer till wednesday.

Rudi

Thx at Peter Angus for his fast reply on my request. Sorry again Peter !

Rudi · Sep 29, 2009, 01:14 AM

Yesterday I made the floater and the enginecowls.

Rudi

GGRN · Sep 29, 2009, 04:18 AM

What a nice flying pork-epic ! Keep on the good job, Rudi ! Learjet, B17, A 318... And one more to maiden ! Can't wait for the result !

Philippe

Rudi · Sep 29, 2009, 05:22 AM

Quote:

Originally Posted by GGRN

Qu'est-ce qu'un porc Fluing belle épopée! Keep on the good job Rudi! Learjet, B17, A 318 ... Et un de plus pour Maiden! Ne peut pas attendre le résultat!

Philippeing pork-epic ! Keep on the good job Rudi ! Learjet, B17, A 318... And one more to maiden ! Can't wait fo the result !

Philippe

Thx Master Philippe,

yes a lot of maidens are to do

, but believe me all will be done step by step. As I wrote my Concorde had to wait more than 6 years

. The Sunderland maiden will be asap. I swear .

greetings from vienna

Rudi

P.S. I plan to hire a new job soon and I am sure that I will not have so much time for modeling in future so I try to push all the things which I want to see ready . My carrier comes to a crossing point and the desc. to change is definitly so I have to push , push , piush .........

Rudi · Sep 30, 2009, 04:37 AM

Hi Guys,

yesterday I had not much time so I made motor dummys (laminated with invisible thermo foil)

Rudi

rawy · Sep 30, 2009, 07:11 AM

Looking Good Rudi,

I admire your motivation at building these days, too nice weather here to start and lots of other occupation as we're preparing our 27 day US-Trip in October, hope to find some RC related things over there

And best wishes for your new Job Rudi !

Walter

Rudi · Oct 01, 2009, 01:04 AM

Quote:

Originally Posted by rawy

Looking Good Rudi,

I admire your motivation at building these days, too nice weather here to start and lots of other occupation as we're preparing our 27 day US-Trip in October, hope to find some RC related things over there

And best wishes for your new Job Rudi !

Walter

Hi Walter ,

many thx . Hope you found some RC stuff oversea. The dollar compared to the Euro is 1:1,4 , hope this is also for your Franken !
Yes I have a good feeling regarding my pos. new job. Many meetings regarding pos. change in the moment but I am optimistic !
Yesterday I joined the wingparts together and mounted the motors in the nacelles. I ordered two new motors from HC. One of mine is a littlebit heavy to turn

To be on the save side I will check it today evening and in the worst case I will replace it against a new one.
Have a nice trip and I will send you your magazine and the Beaverplan back as soon as pos. Many thx again

Rudi

Rudi · Oct 01, 2009, 05:32 AM

lunchbreak and I made the ailerons and the center LE ( I am to fat so I prefer to build models in that time

)

Rudi

Sep 22, 2009, 01:07 AM	#16
Rudi Registered User Join Date: Jan 2001 Location: Vienna Schwechat, Austria Posts: 2,808	Hi Walter, hi Phillip, many thx. FYI my wife is so angry about me because me building speed increesed from project to project and my storage place is limited . Never the less what should I do, I am a "model building junky" O.K guys, yesterday I started with the center wing . More to come . OPs.... I have forgotten that I plan to use the sunderland (in oposite to Peter Angus) in his initialy element, water Rudi Attached Thumbnails 34.5 KB · Views: 49 32.2 KB · Views: 47

Sep 23, 2009, 12:33 AM	#17
Rudi Registered User Join Date: Jan 2001 Location: Vienna Schwechat, Austria Posts: 2,808	go with the wings last night with the wings .(not much because I mentioned that there are 4 rips missing in the part drawings from Peter Angus) Rudi Attached Thumbnails 17.9 KB · Views: 47 a lot to draw ! 17.5 KB · Views: 54

Sep 24, 2009, 04:16 AM	#20
Rudi Registered User Join Date: Jan 2001 Location: Vienna Schwechat, Austria Posts: 2,808	O.K as promised here are the wings with the "missing2 rips. More to come Rudi Attached Thumbnails 25.7 KB · Views: 51 24.6 KB · Views: 54

Sep 25, 2009, 02:52 AM	#21
Rudi Registered User Join Date: Jan 2001 Location: Vienna Schwechat, Austria Posts: 2,808	started with wiring Rudi Attached Thumbnails 20.4 KB · Views: 64

Sep 29, 2009, 01:14 AM	#24
Rudi Registered User Join Date: Jan 2001 Location: Vienna Schwechat, Austria Posts: 2,808	Yesterday I made the floater and the enginecowls. Rudi Attached Thumbnails 16.5 KB · Views: 27 18.7 KB · Views: 27 23.2 KB · Views: 31 16.2 KB · Views: 26

Sep 23, 2009, 12:49 AM	#18
balsaleiste Registered User Join Date: May 2009 Posts: 4	Which rips are missing?

Sep 29, 2009, 04:18 AM	#25
GGRN One eyed Corsair Join Date: Jul 2005 Location: PARIS Posts: 1,964	What a nice flying pork-epic ! Keep on the good job, Rudi ! Learjet, B17, A 318... And one more to maiden ! Can't wait for the result ! Philippe Last edited by GGRN; Sep 29, 2009 at 06:07 AM.

Sep 30, 2009, 04:37 AM	#27
Rudi Registered User Join Date: Jan 2001 Location: Vienna Schwechat, Austria Posts: 2,808	Hi Guys, yesterday I had not much time so I made motor dummys (laminated with invisible thermo foil) Rudi Attached Thumbnails 27.2 KB · Views: 39 22.7 KB · Views: 28 25.2 KB · Views: 34 32.8 KB · Views: 25

Sep 30, 2009, 07:11 AM	#28
rawy e-powered foam Join Date: Dec 2002 Location: swiss watch makers area Posts: 529	Looking Good Rudi, I admire your motivation at building these days, too nice weather here to start and lots of other occupation as we're preparing our 27 day US-Trip in October, hope to find some RC related things over there And best wishes for your new Job Rudi ! Walter

Oct 01, 2009, 05:32 AM	#30
Rudi Registered User Join Date: Jan 2001 Location: Vienna Schwechat, Austria Posts: 2,808	lunchbreak and I made the ailerons and the center LE ( I am to fat so I prefer to build models in that time ) Rudi Attached Thumbnails 15.6 KB · Views: 32 18.0 KB · Views: 29

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My F18 - based on jetset44 plan	alexcmag	Pusher Prop Jet Models	18	Mar 24, 2005 04:28 PM
printing a plan on A4 size from DXF	eran_k	The Builders Workshop	7	Oct 24, 2004 05:46 PM
Need info on Arup plane plan from Flying Models back issue	Tomahawk	Electric Plane Talk	3	Apr 23, 2004 08:39 PM
Formula for balancing at the CG, based on distance from CG???	Michael in Toronto	Modeling Science	4	May 11, 2003 10:52 PM
Anybody lay there hands on the new airhog p-40	kit basher	Electric Plane Talk	0	Jul 27, 2001 12:34 PM