HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Aug 05, 2009, 06:14 AM
Registered User
elan's Avatar
VT
Joined Feb 2006
2,147 Posts
Discussion
BeltCP V2 with stiff head...

Hey guys, I have a quick question. I am in the process of getting a Belt CP V2 in the air; as an aside, I am happily surprised with the model. Anyway, I noticed that the model came from the factory with a head somewhat on the stiff side. When you move the fly bar, it doesn't move as easily as I think it should. As regards a fix, any suggestions for usual suspects? From past experience with other models, once I get the model dialed-in I am just going to fly it and see if the head loosens up, if it doesn't then I'll look into it further.
elan is offline Find More Posts by elan
Last edited by elan; Aug 05, 2009 at 07:01 AM. Reason: sp
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
FS Hornet with CP head logo10 Aircraft - Electric - Airplanes (FS/W) 0 Jul 07, 2002 10:37 AM
F/S Hornet built with CP head and servos logo10 Aircraft - Electric - Airplanes (FS/W) 0 May 21, 2002 12:40 AM
F/S New hornet built with CP head logo10 Aircraft - Electric - Airplanes (FS/W) 0 May 20, 2002 01:07 AM