Best place to pick up the mintor motors?

Originally Posted by going4speed

Best place to pick up the mintor motors?

Cradling very gently from the bottom?

Sorry.

http://www.topdawgaviation.com/ Mintors's can be found here

Originally Posted by going4speed

Best place to pick up the mintor motors?

Topdawg or Chief aircraft.

Got the 4325 mounted, still need to get all the servos in and get it wired up but hope to get her in the air tomorrow!

For those of you running 8s with 2 4000mah batts wha flight times are you getting? I am running a motrolfly 4325-310 and a vess 17x6 for now until my 18x8's get here

for those of you that have ordered a MB kit for the velox, does the motor extension box for electric motors come with the MB kit?

Steve T,

I ordered some 5x100mm bolts from Fastnal and they should be in tomorrow for me to pick up!

I'll post pics after its all mounted up.

Originally Posted by hugocraft

Steve T,

I ordered some 5x100mm bolts from Fastnal and they should be in tomorrow for me to pick up!

I'll post pics after its all mounted up.

Hotay.....With the 100mm, you will probably end up having to stack some washers under the head to keep from bottoming out on the shank portion of the bolt. I had the four for my mount and I compared them, and saw at that length this would be necessary.. I don't know why they jump from 80mm to 100mm.....too darn big of a jump!!

Edit!! Just found some 90mm long at Mr. Metric (which is only about five miles from my home).... scroll to the bottom of the page.... . If you decide you want them, let me know and I'll go get some!!

SteveT

Awesome!

Originally Posted by Bigster

Cradling very gently from the bottom?

Sorry.

Originally Posted by nebwake

For those of you running 8s with 2 4000mah batts wha flight times are you getting? I am running a motrolfly 4325-310 and a vess 17x6 for now until my 18x8's get here

7 minutes timer goes beep

Originally Posted by SteveT.

Hotay.....With the 100mm, you will probably end up having to stack some washers under the head to keep from bottoming out on the shank portion of the bolt. I had the four for my mount and I compared them, and saw at that length this would be necessary.. I don't know why they jump from 80mm to 100mm.....too darn big of a jump!!

Edit!! Just found some 90mm long at Mr. Metric (which is only about five miles from my home).... scroll to the bottom of the page.... . If you decide you want them, let me know and I'll go get some!!

SteveT

I'll pick up the 100mm ones tomorrow and order some of the 90mm ones while I'm there.

4325 showed up today. Looks like I get to maiden this weekend if my brother doesn't have to work

Originally Posted by losifanatic

4325 showed up today. Looks like I get to maiden this weekend if my brother doesn't have to work

awesome! were having a get together at RAA this weekend starting tomorrow Losi..road trip!!! come on down if yur not doing anything. Im hoping to get some flights on my slicks and msx and vyper!

I'm sure its in here but im lazy... What size servo arms are needed on the 4 surfaces? im running a push/pull rudder, thanks in advance for keeping me lazy!