Jeti 2.4Ghz system not FCC certified? - Page 3

Gordito Volador · Jul 27, 2009, 03:29 PM

Hey Jason,

It is like two months already since this fiasco began. Can you give us an update?

Regards, Bill

village_idiot · Jul 27, 2009, 04:03 PM

Wow, it is almost two months now.

Guz · Jul 27, 2009, 07:48 PM

Yea, need info!!!

I've got my shopping list ready:
1 DUPLEX TMe : transmitter module for Multiplex EVO 7, 9 and 12.
1 Antenna 2.4 - 2.5 GHz, 2 dBi (? If it doesn't come with the TMe ?)
2 DUPLEX R4 : 4 channels receiver
1 Module MVario
1 JETIBOX
1 Hold for JETIBOX

I'm working now, and actually have some cash. Might not have it later

Francois-Fra · Jul 27, 2009, 08:40 PM

TMe module comes with antenna.
Istalled an TU module in my Evo, because the TMe did not exist when I changed to Jeti Duplex. Works really great. Offers you all the stuff that Jim Drew from XPS promised us since 2006.

Guz · Jul 27, 2009, 09:22 PM

Quote:

Originally Posted by Francois-Fra

TMe module comes with antenna.
Istalled an TU module in my Evo, because the TMe did not exist when I changed to Jeti Duplex. Works really great. Offers you all the stuff that Jim Drew from XPS promised us since 2006.

Thanks!

Yea... XPS : empty promises

It's been 3 years, dang, I didn't realize it's been that long.

village_idiot · Aug 04, 2009, 01:33 PM

Things are starting to look bad for Hobby Lobby:
http://hraunfoss.fcc.gov/edocs_publi...-09-1626A1.pdf
also in this post:
http://www.rcgroups.com/forums/showthread.php?t=1090144

I know ownership changed recently, but what was done before could really mess you guys up with this Jeti issue.

bhchan · Aug 12, 2009, 12:41 PM

If the Jeti tx/rx not available because of the FCC issue, why the latest crash sale has the Jetiger which comes with a tx and rx on 2.4GHz?

http://www.hobby-lobby.com/jetiger_e...21631_prd1.htm

Is HL importing other brand of 2.4GHz system without FCC Certs?

Brian, an EAJ

Flyboone · Aug 12, 2009, 02:06 PM

Hey guys,
Everything is fine. We are working the FCC and all is well. The Jetiger 2.4 radio system is FCC certified. We do not and will not sell any unlicensed products.

Thanks,
Jason Cole

village_idiot · Aug 12, 2009, 02:33 PM

Wish the Jetiger was available in a receiver ready system for like $99.00. The RTF radios are never very good.

codezilla · Aug 13, 2009, 06:41 PM

Any idea on the status of the FCC certification with Jeti systems? How long do you think we need to wait until HL starts selling their system again?

Adrian

Terror Dactyl · Aug 13, 2009, 08:11 PM

Don't forget that this is a Gov Dept that you are trying to guess the speed of action as well as the consideration that the view it as more than a toy that transmits

Yes I am waiting as well and I truly wish us good luck

aero104 · Aug 30, 2009, 01:33 PM

Quote:

Originally Posted by Terror Dactyl

Don't forget that this is a Gov Dept that you are trying to guess the speed of action as well as the consideration that the view it as more than a toy that transmits

Yes I am waiting as well and I truly wish us good luck

keep in mind, FCC certification does not have to be done through FCC.gov. There are thousands of TCB testing centers around the world that specialize in testing and FCC approval. This is from the FCC:

"What is a TCB?

A TCB (Telecommunications Certification Body) is a non-governmental body accredited by ANSI to review applications and issue FCC Certification grants of approval for devices requiring approvals."

I too am waiting for approval! I bought a xp9303 to convert for gliders.

Chris

Guz · Sep 08, 2009, 02:53 PM

Kinda bored, thought I would bump this thread to see if there has been any new information on Jeti getting their FCC ID's on their products.

Gordito Volador · Sep 17, 2009, 04:34 PM

Hey Jason,

It's three and a half months now that I cannot use my Jeti stuff. What is happening?

Regards, bill

bhchan · Sep 17, 2009, 04:53 PM

I returned all my transmitter module and related stuff to HL, since I can't use them without a receiver! The funny thing is one could buy the tx module but not the receivers back then without the certification!

Brian, an EAJ

Aug 12, 2009, 12:41 PM	#37
bhchan Electric Airplane Junkie Join Date: Jun 2000 Location: San Mateo, Ca , USA Posts: 4,405	If the Jeti tx/rx not available because of the FCC issue, why the latest crash sale has the Jetiger which comes with a tx and rx on 2.4GHz? http://www.hobby-lobby.com/jetiger_e...21631_prd1.htm Is HL importing other brand of 2.4GHz system without FCC Certs? Brian, an EAJ Last edited by bhchan; Aug 12, 2009 at 04:08 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Product Jeti 2.4GHZ system with working telemetry!	Julez	Radios	1258	Nov 17, 2009 07:33 AM
Discussion Jeti 2.4GHz Radio System	ricoalonso	Hobby Lobby	67	Jul 08, 2009 01:56 PM
Discussion 6EX-2.4GHz system	Rox	DIY Electronics	4	Apr 10, 2007 10:07 AM
Sold (pics added)ALULA 3 servo, complete setup with 2.4ghz system	rcaddition	Aircraft - Sailplanes (FS/W)	2	Apr 10, 2007 12:47 AM
Discussion Spektrum DX6 6-channel DSM 2.4Ghz System	cpd1343	Dock Talk	38	Feb 23, 2007 06:53 PM

Jul 27, 2009, 03:29 PM	#31
Gordito Volador Flying Fatboy Join Date: Apr 2003 Location: Tampa, FL Posts: 1,239	Hey Jason, It is like two months already since this fiasco began. Can you give us an update? Regards, Bill

Jul 27, 2009, 04:03 PM	#32
village_idiot Inciting Riots Join Date: Dec 2006 Posts: 7,245	Wow, it is almost two months now.

Jul 27, 2009, 07:48 PM	#33
Guz Gutless wonder Join Date: Dec 2005 Location: Tempe, AZ Posts: 1,701	Yea, need info!!! I've got my shopping list ready: 1 DUPLEX TMe : transmitter module for Multiplex EVO 7, 9 and 12. 1 Antenna 2.4 - 2.5 GHz, 2 dBi (? If it doesn't come with the TMe ?) 2 DUPLEX R4 : 4 channels receiver 1 Module MVario 1 JETIBOX 1 Hold for JETIBOX I'm working now, and actually have some cash. Might not have it later

Jul 27, 2009, 08:40 PM	#34
Francois-Fra Registered User Join Date: Jan 2009 Location: Deauville France Posts: 40	TMe module comes with antenna. Istalled an TU module in my Evo, because the TMe did not exist when I changed to Jeti Duplex. Works really great. Offers you all the stuff that Jim Drew from XPS promised us since 2006.

Aug 04, 2009, 01:33 PM	#36
village_idiot Inciting Riots Join Date: Dec 2006 Posts: 7,245	Things are starting to look bad for Hobby Lobby: http://hraunfoss.fcc.gov/edocs_publi...-09-1626A1.pdf also in this post: http://www.rcgroups.com/forums/showthread.php?t=1090144 I know ownership changed recently, but what was done before could really mess you guys up with this Jeti issue.

Aug 12, 2009, 02:06 PM	#38
Flyboone https://twitter.com/flyboone Join Date: Oct 2003 Location: Nashville,TN Posts: 1,551	Hey guys, Everything is fine. We are working the FCC and all is well. The Jetiger 2.4 radio system is FCC certified. We do not and will not sell any unlicensed products. Thanks, Jason Cole

Aug 12, 2009, 02:33 PM	#39
village_idiot Inciting Riots Join Date: Dec 2006 Posts: 7,245	Wish the Jetiger was available in a receiver ready system for like $99.00. The RTF radios are never very good.

Aug 13, 2009, 06:41 PM	#40
codezilla Registered User Join Date: Feb 2003 Location: Chino Hills, CA Posts: 1,351	Any idea on the status of the FCC certification with Jeti systems? How long do you think we need to wait until HL starts selling their system again? Adrian

Aug 13, 2009, 08:11 PM	#41
Terror Dactyl Registered User Join Date: Aug 2002 Location: Houston, TX Posts: 120	Don't forget that this is a Gov Dept that you are trying to guess the speed of action as well as the consideration that the view it as more than a toy that transmits Yes I am waiting as well and I truly wish us good luck

Sep 08, 2009, 02:53 PM	#43
Guz Gutless wonder Join Date: Dec 2005 Location: Tempe, AZ Posts: 1,701	Kinda bored, thought I would bump this thread to see if there has been any new information on Jeti getting their FCC ID's on their products.

Sep 17, 2009, 04:34 PM	#44
Gordito Volador Flying Fatboy Join Date: Apr 2003 Location: Tampa, FL Posts: 1,239	Hey Jason, It's three and a half months now that I cannot use my Jeti stuff. What is happening? Regards, bill

Sep 17, 2009, 04:53 PM	#45
bhchan Electric Airplane Junkie Join Date: Jun 2000 Location: San Mateo, Ca , USA Posts: 4,405	I returned all my transmitter module and related stuff to HL, since I can't use them without a receiver! The funny thing is one could buy the tx module but not the receivers back then without the certification! Brian, an EAJ