New firmware posted May 8, 2009 - Page 6

RC Man · May 30, 2009, 07:39 PM

Quote:

Originally Posted by jbrowne

I have CastleLink version 3.12.

When I download and run the 3.13 install, i complains about not finding an ".msi" file then says that it can't remove the existing version.

Any help would be appreciated

Try this: uninstall the old version (Windows control panel). Then reboot and install the new version.

.

jbrowne · Jun 01, 2009, 09:54 PM

Quote:

Originally Posted by RC Man

Try this: uninstall the old version (Windows control panel). Then reboot and install the new version.

.

Same result when I use Add/remove programs

RC Man · Jun 02, 2009, 06:10 AM

Quote:

Originally Posted by jbrowne

Same result when I use Add/remove programs

Time to call CC Tech Support.

jamesppp · Jun 02, 2009, 10:43 AM

Quote:

Originally Posted by jbrowne

Same result when I use Add/remove programs

What file is the existing version saved to. Is it in Program Files?

danny.act · Jun 05, 2009, 07:32 AM

If You are running Windows "Vista" on Your PC this could be the problem.

You can read about installation problem and how to fix installation method of CC 3.12 Link on CC site.

muley · Jun 09, 2009, 06:17 AM

Well, I'm taking a deep breath and going through all 4 of my speedo setups again. I've read through this thread and figured I would give the 3.13 another try. So far 2 haven't really had the gov work, 1 I could barely fly cause of the tail jerking, and 1 started burning up, although I can't positively pin that on the firmware. (It could be coincidence.) I'd really like to get the govs back to working the way they did before the upgrade - i've done so much tweaking I forget where I started with settings for each one! It's no picnic getting to the receiver on my 2 HV rigs, let alone doing it 6 or 7 times as I try different gain settings.
OK, I'm whining, and yeah, they don't cost $400 each, and they are an American product, so I'll go through them all again and give it another chance.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alert New PHOENIX FIRMWARE POSTED	lestingoy	Castle Creations	256	Jan 26, 2009 06:46 AM
New Articles Posted	Hascal	Site Chat	1	Jul 24, 2001 01:27 AM
New Gallery Page and New Reviews Posted	Steven Horney	Site Chat	0	Jun 26, 2001 01:37 AM
New Articles Posted	Steven Horney	Site Chat	6	May 24, 2001 01:20 AM
:cool: SR X250 Just Finished - New Photos Posted	costath	Electric Plane Talk	6	Apr 27, 2001 07:33 PM

Jun 05, 2009, 07:32 AM	#80
danny.act Electrified nitroman Join Date: Jun 2004 Location: Belgium Posts: 267	If You are running Windows "Vista" on Your PC this could be the problem. You can read about installation problem and how to fix installation method of CC 3.12 Link on CC site.

Jun 09, 2009, 06:17 AM	#81
muley Registered User Join Date: May 2007 Location: Cape Cod Posts: 141	Well, I'm taking a deep breath and going through all 4 of my speedo setups again. I've read through this thread and figured I would give the 3.13 another try. So far 2 haven't really had the gov work, 1 I could barely fly cause of the tail jerking, and 1 started burning up, although I can't positively pin that on the firmware. (It could be coincidence.) I'd really like to get the govs back to working the way they did before the upgrade - i've done so much tweaking I forget where I started with settings for each one! It's no picnic getting to the receiver on my 2 HV rigs, let alone doing it 6 or 7 times as I try different gain settings. OK, I'm whining, and yeah, they don't cost $400 each, and they are an American product, so I'll go through them all again and give it another chance.