HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Mar 06, 2009, 03:27 PM
Sleepy Hollow, IL
Joined Dec 2008
457 Posts
Build Has Started

I have started the build already and have all of my foam cut (see picture). Need to now cut some CF for the blade stiffeners.

I am guesing that the blade angle in the center hub is about 7 degrees. My hub block is 2 inches square and 5/16 inches thick. The blades are each 10.5 inches long and 2 inches wide.
ampmaker is offline Find More Posts by ampmaker
Reply With Quote
Sign up now
to remove ads between posts
Old Mar 12, 2009, 06:10 PM
Sleepy Hollow, IL
Joined Dec 2008
457 Posts
sr71fan,

Finally finished the autogyro based on your design and information. Soon as the weather warms up I will be giving it a maiden flight.

Setup is as follows:

BP2112-19 Motor
GWS 8x4.3 prop
Turnigy 10A ESC
GWS Nano 4 channel RCVR
2 HXT -500 servos for R & E
1 HS-55 servo for rotor tilt


Put on large wheels and a tail wheel to help run through the grass in my back yard. Weight without battery is 5.5 ounces.

Will post results of the maiden when it happens.

ampmaker
ampmaker is offline Find More Posts by ampmaker
Reply With Quote
Old Mar 12, 2009, 07:23 PM
Flying...Pushing Air Down
sr71fan's Avatar
Clovis, NM, USA
Joined Nov 2000
3,552 Posts
Ampmaker,

Hey, that looks pretty good! A lot better than mine! Hope you get to fly it soon. I'm already thinking about a new and improved version. BTW, I'm happy to report that I looped mine several times at the TINY event last weekend and did some autos, too. I hope someone got video of it. It comes down really fast. My next one will have a bit larger rotor.

Happy Maiden!

Gary
sr71fan is offline Find More Posts by sr71fan
Reply With Quote
Old Mar 14, 2009, 02:26 PM
Sleepy Hollow, IL
Joined Dec 2008
457 Posts
sr71fan,

Had some problems on my maiden.

First was trying to roll through the grass in my back yard. Still a little too high from last year and not really flat enough.

Second I was not able to spool up the rotor to speed and all of the take offs were aborted flip overs.

The wind was just about non existant and the rough ground made it all to hard.

I have a twin rotor Twirl that seemed to fly alright. Overall the rotor tilt angle is less on the twirl. I am not sure how much difference that makes.

Ampmaker
ampmaker is offline Find More Posts by ampmaker
Reply With Quote
Old Mar 14, 2009, 05:02 PM
Flying...Pushing Air Down
sr71fan's Avatar
Clovis, NM, USA
Joined Nov 2000
3,552 Posts
Ampmaker,

Those single-rotors are much more difficuilt than the twins. That's why more people build the twins. Keep trying, and once you find the right tilt angle (L-R), it'll go a lot smoother. Find a smoother runway, like a parking lot, or deserted road, so your takeoff run will be smoother. Don't give up!

Gary
sr71fan is offline Find More Posts by sr71fan
Reply With Quote
Old Mar 16, 2009, 07:52 PM
Flying...Pushing Air Down
sr71fan's Avatar
Clovis, NM, USA
Joined Nov 2000
3,552 Posts
Outdoor Loops!

I finally had a chance to do some more outdoor flying today. Here's a short video...

Autogyro Single-Rotor Loops (1 min 14 sec)
sr71fan is offline Find More Posts by sr71fan
Reply With Quote
Old Mar 16, 2009, 08:36 PM
Registered User
Joined Apr 2007
318 Posts
Good show, Gary !!! Looks like fun !!! Charlie
ottogiro58 is offline Find More Posts by ottogiro58
Reply With Quote
Old Mar 16, 2009, 09:36 PM
Registered User
Bedford Indiana
Joined May 2004
242 Posts
It looks like that things flies great. Enjoyed the video of a single rotor foamy flying. I have one built, but have not flown it yet (weather, fear, all of the above). Good job on the aircraft.

Chuck
...somewhere in Indiana...
Forensic Flyer is offline Find More Posts by Forensic Flyer
Reply With Quote
Old Mar 17, 2009, 12:12 PM
Flying...Pushing Air Down
sr71fan's Avatar
Clovis, NM, USA
Joined Nov 2000
3,552 Posts
New Rotor... 3-Blade

I tested a 3-blade rotor on the same airframe last night (under the street lights at Midnight). This rotor is one inch larger in diameter, same chord blades as the 4-blade, and flies much better. Maybe it's not as draggy. No videos yet.

Gary
sr71fan is offline Find More Posts by sr71fan
Reply With Quote
Old Mar 18, 2009, 11:24 PM
Just another Pilot
Joined Apr 2006
13 Posts
Gary, you never fail to amaze me KEWL stuff! Oh and after a year + break from the hobby, I am getting back into it a little.



Ken
Ken Bryant is offline Find More Posts by Ken Bryant
Reply With Quote
Old Mar 19, 2009, 12:24 AM
Flying...Pushing Air Down
sr71fan's Avatar
Clovis, NM, USA
Joined Nov 2000
3,552 Posts
3-Blade Rotor

Hi Ken!

That's great news! Glad to hear you're back. I'm still having fun, as you can see.

Here's a video of some flights today with the 3-blade rotor...

Gary

AutoGyro 3-Blade Rotor Test-Flights (3 min 30 sec)
sr71fan is offline Find More Posts by sr71fan
Reply With Quote
Old Mar 19, 2009, 04:14 AM
Registered User
PeterO_UK's Avatar
Joined Aug 2006
1,462 Posts
Gary,

That was some nice flying in that wind

PeterO_UK
PeterO_UK is offline Find More Posts by PeterO_UK
Reply With Quote
Old Mar 19, 2009, 03:17 PM
Flying...Pushing Air Down
sr71fan's Avatar
Clovis, NM, USA
Joined Nov 2000
3,552 Posts
Thanks Peter!

Around here, if you want to fly outdoors, you gotta accept the wind.

Gary
sr71fan is offline Find More Posts by sr71fan
Reply With Quote
Old Mar 25, 2009, 09:01 PM
Lost in the Sky
Richard N's Avatar
Burleson, Texas
Joined Jun 2003
1,934 Posts
Gary,

Comparing rotor tilt versus rudder, which do you find more effective?

I have a LA Heli Cierva that is a single rotor with only two axis controls tilting the rotor head side to side and back and forth. Some builders have added a rudder. I am considering adding elevator too and trying to fly it like my Pisces where the rotor is fixed and you control pitch and yaw with rudder and elevator.

Richard
Richard N is offline Find More Posts by Richard N
Reply With Quote
Old Mar 25, 2009, 09:29 PM
Flying...Pushing Air Down
sr71fan's Avatar
Clovis, NM, USA
Joined Nov 2000
3,552 Posts
Richard,

I find the rotor tilt and rudder equally effective (for roll and yaw, respectively). When I choose to fly with them coupled (flip a switch), the model becomes very responsive.

I have no experience with the DC head, so you're on your own in that regard.

Good luck with your project, and please post some pics!

Gary
sr71fan is offline Find More Posts by sr71fan
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Looking for TurboCAD 2D 6.5 Zoom The Builders Workshop 22 Dec 01, 2006 12:04 PM
Yippee! My wife got me a digital postal scale today. My moth is 6.5 oz w/ no battery! The Other Dave Parkflyers 1 Feb 08, 2002 10:37 PM
Aeronaut 6.5x4 or 6.5 prop for Zagi 450T ? freq Foamies (Kits) 3 Oct 25, 2001 06:36 PM
Will a 6.5-4 prop work with a direct drive Permax 480? Ryan Nau Power Systems 2 Apr 29, 2001 11:43 AM