|Feb 22, 2009, 01:56 AM|
For Sale - CHIPMUNK (Vintage Model Products Kit) Ready to cover 850 sq inches
CHIPMUNK (Vintage Model Products Kit) Ready to cover 850 sq inches
Here’s a classic Chipmunk kit. Nice light built up balsa fuse with balsa covered white foam wings and tail.
I was thinking it might make a good Glow to E power conversion kit. It’s at the perfect stage – all framed up and could be “lightened if desired” before covering.
Asking $100 plus actual shipping cost. The box is BIG (49*19*7 inches) and shipping is from ZIP 95403. Please calculate your actual shipping cost and include insurance.
Post here or PM if you are interested or have questions.
|Feb 22, 2009, 01:59 AM|
The wing, stab and rudder need the control surfaces cut out and trimmed. Guess you could do just ailerons or ailerons and flaps if desired.
While I was pulling the kit apart for pix, thought I should weigh them. Only have my cheap 10 lb spring scale at home…. Please note: none of these weights are to the gram – just easier to read the gram needle.
Box – complete – 3500
Wings 500 (a little less)
Stabs, ruder, and balsa capping shown in picture, 120
Glass cowl – 40
Left parts bag – 1200
Right parts bag- 1300
Hardwood and gear –etc 2200
I have stored the kit for quite a while – and now that I looked it over – it still looks sweet.
A tiny bit of damage to one wing tip – but that’s about all I could find. The big Clear Chipmunk canopy is still wrapped in stock shipping paper – so I did not unwrap it.
PS: This Chipmunk is BIG ENOUGH to see! I laid out the kit on my drive way and a 10 mph wind swept it back into the garage. Needed to move parts inside for a picture.
Think it should be fun.
|Feb 23, 2009, 05:31 PM|
Mark - I sent you a PM on picking up the plane.
John - If Mark can pick it up, it would be safer than shipping. However, if Mark does not take it, I will let you know.
Thanks for the replies.
|Feb 23, 2009, 09:32 PM|
Mark won't be able to pick up the kit after all.
The box is BIG. 49*19*7 inches, which makes it over size. Weight is 9 lbs.
Shipping is from ZIP 95403.
It looks like about $50 to ship UPS ground. Do you still want it?
|Feb 23, 2009, 10:05 PM|
United States, CA, Petaluma
Joined Sep 2004
Trader Rating: 316
<SIGH> I just ran the rates also, on Fedex and UPS, to see if I could perhaps help out somehow but they are both like 45 bucks plus! :EEK: I miss DHL. This shipping of airplanes has just about been priced right out of the normal mans reach.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||For Sale - CHIPMUNK (Vintage Model Products Kit) Ready to cover 850 sq inches||Daveairway||Aircraft - Fuel - Airplanes (FS/W)||3||Dec 14, 2008 06:53 PM|
|For Sale||CHIPMUNK (Vintage Model Products Kit) Ready to cover 850 sq inches||Daveairway||Aircraft - Electric - Airplanes (FS/W)||4||Aug 18, 2008 06:00 PM|
|FOR SALE: Motors, gearboxes, esc, charger, kit, books, covering||Balin||Aircraft - Electric - Airplanes (FS/W)||7||Dec 07, 2002 08:00 PM|
|For Sale Piccolo helicopter, radio, charger, etc. Ready to Fly||jdhelio||Aircraft - Electric - Airplanes (FS/W)||3||Feb 16, 2002 07:07 AM|
|For Sale: GRAUPNER Electro-UHU sailplane kit||Aeronut||Aircraft - Electric - Airplanes (FS/W)||3||Jan 21, 2002 06:20 PM|