|Dec 14, 2012, 10:50 AM|
Joined Jul 2009
SIG Wonder Questions
I have been into RC my whole life, and I have started building my first kit, a SIG Wonder.
Well I understand it is not rocker science, but do have a few questions. I am pretty much done building the wing, and when I went to put on thop leading edge of the 2-3/4x36" long balsa piece I made a mistake and when to the front edge of the leading edge instead of trimming a 1/4" off liek the bottom and starting at the 1/4" square spar like on the bottom side. Of course I noticed this after it had glued on. Wll I cut, peeled, etc, and got the piece off and did it the way it should have been done. It is not as neat and clean now, will hit it with a sanding block. To make a long story short, how "PERFECT" does this all need to be? I know as close as possible, but is there forgivness? Are these little errors gonna make it so the plane won't fly right? Same with the fueselage, all built up, is it perfect... no, but not far off. Am I worring for nothing?
I am defintley used to better instructions, and more pictures.
|Dec 16, 2012, 10:29 PM|
United States, TN, Knoxville
Joined Jan 2006
Start at the leading edge and wrap over the ribs and down the spar. I like to have the sheeting halfway on the spar to support the capstrips. Always hold it down and straight while doing this. I always block the trailing edge on a level to ensure a straight trailing edge also. Practice.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||LPU SIG LT40/GP PT20/SIG WONDER/case of fuel||kartooo||Aircraft - Fuel - Airplanes (FS/W)||2||Oct 10, 2012 08:14 PM|
|Sold||sig wonder 25 sized||rcshirt||Aircraft - Electric - Airplanes (FS/W)||3||Jun 03, 2012 04:39 PM|
|For Sale||SIG LT40/pt 20/sig wonder/case of fuel S.E. MA||kartooo||Aircraft - Fuel - Airplanes (FS/W)||4||May 16, 2012 10:19 PM|
|Wanted||sig wonder wing kit||ululi1970||Aircraft - Fuel - Airplanes (FS/W)||1||Mar 20, 2012 10:25 AM|
|For Sale||Sig 4 Star 60 ARF, wonderful plane||nero1156||Aircraft - Fuel - Airplanes (FS/W)||1||Feb 28, 2012 03:56 PM|