|Apr 18, 2012, 06:18 PM|
Joined Jan 2010
Hi Guys, I have couple of 5A HV UBECs, been using for years set at 5V only in some of my foamy 3/D models using smaller servos. While hooking it up on my latest model and set to 6V supplying power to 5MG, 9kg servos and monitoring under the load the voltage was dropping down considerably well bellow 6 volts.
Any suggestion to get some reasonably priced and reliable Reg. to handle 3+lipo input and constant output at 6V while using above MG servos. My servo leads are close to 2m long via 2 match boxes so there is some drop or resistance. I was looking at some at HK but they seem to have poor reviews, Joe.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sold Perfect Regulators HV BEC - NEW!!||joe1l||Aircraft - Electric - Helis (FS/W)||0||Apr 17, 2012 07:44 PM|
|Sold Castle Creations ESCs: 85 HV & NIB 110 HV||jgalexander||Aircraft - Electric - Power Systems (FS/W)||4||Apr 14, 2012 11:29 PM|
|Sold Castle Creations ESCs: 85 HV & NEW 110 HV||jgalexander||Aircraft - Electric - Power Systems (FS/W)||3||Apr 14, 2012 11:28 PM|
|Discussion What makes an HV ESC, HV?||SkylineFlyer||Power Systems||6||Nov 16, 2011 11:31 PM|
|Wanted cc esc hv 120 or any good 110 obove hv||yf22raptor||Aircraft - Electric - Power Systems (FS/W)||1||Sep 17, 2011 11:55 PM|