|
|
|
|
|
|
|
|
Indianapolis, IN
Joined Oct 2010
1,565 Posts
|
There is no way I could fly my night vapor in the same space as my MV. That is worth the price for me. This was marketed and made to fly indoors in very tight spaces. I think it is really unfair to compare two planes that were made for different purposes, it would be like comparing the micro T28 and the larger version saying that the micro is horrible for not being able to fly in as much wind.
I think this little thing does what it is supposed to do beautifully, this is all just my opinion of course
|
|
|
|
|
|||
|
|
Gents
Here is a video comparing the flying speed of the Original Mk 1 vapor (no lights) and the mini.
Oh and has anyone looped the mini yet ? when I tried it got over the top then went into an shallow inverted dive - not good. Terry |
||
|
|||
|
|
||
|
|
Quote:
Accucel 6 accucell 8 |
|
|
||
|
|
||
|
|
Quote:
For the best super-slow high-alpha performance, I mount my Hyp 70s nearly all the way back, oriented N-S. I mount the factory 30s about an inch or so further forward, still oriented N-S. In both cases, the connector faces aft. However, I move the battery to wherever it needs to be to provided the flight-characteristics I'm looking for at the moment. Forward a bit for flying circuits up-on-the-wing, and aft for flying high-alpha figure-eights in the living room. BTW - aside from using the recommended CG for the maiden, I do not concern myself with the actual CG location on any of my planes. I simply adjust the CG to suit the flight-conditions & the style of flying I wish to do. Just fly the plane & experiment. Moving the CG forward increases stall-speed & decreases maneuverability. Moving the CG aft decreases stall-speed and improves maneuverability. Joel |
|
|
Latest blog entry: Eflite UMX Sbach 3D on 3s - 2300Kv/5043...
|
||
|
|
|
|
|
|
|
Latest blog entry: Eflite UMX Sbach 3D on 3s - 2300Kv/5043...
|
|
|
|
||
|
|
Quote:
Yes Joel I am well aware of that!!! Personally I think the Accucel 6 & 8 are great little chargers and very easy to use -but some newcomers to the hobby may not know where to start. |
|
|
||
|
|
|
|
|
Had an issue landing on tables. The lg would bend too much on touch down and hit the prop on the table. Doesn't hurt performance but sounds ugly. I took the tiniest black thread I could find, and tied it between the struts where they meet the wheels, I gave it a little slack to allow the gear to bend but tighten tup before the prop hits.
|
|
|
|
| Thread Tools | |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wanted I Need a Parkzone (Vapor) DSM2 Rec/ESC/servo "Brick" *** | Joe Pierson | Aircraft - Electric - Micro & Indoor Airplanes | 2 | Mar 25, 2012 10:27 PM |
| Sold parkzone vapor bnf original $50.00 shipped | chrisb22 | Aircraft - Electric - Micro & Indoor Airplanes | 3 | Mar 03, 2012 01:25 PM |