|Nov 02, 2003, 09:47 PM|
Twiglet in Depron
A thread a while back caught my attention, while planning a little-bitty windy day flyer: Micro Pico Jet by Pierre Audette. He was referring to the Twiglet by Paul Alexander Cook. The plane was described on their club web page here
I Emailed for the plan a while back, and kept it handy, while figuring how I was going to do it. I just can't leave well enough alone
Anyway, here's some pictures and specs on how I did it. First, here's my intial report:
My deviations from the plans:
3mm Depron throughout
1/8" CF tube for spar
Both servos moved within 1.5" of front of wing, set side-by-side
Moved motor forward, so prop just cleared the back of the wing
Shortened elevons to clear prop
I'm going to start a new thread to show the pictures and such.
It flew great. Slower than I expected, but still plenty fast. I'm switching to a 3x3 prop for the next flight. Still flew fine down to about 40% throttle... floated in for a landing. Not as pitch sensative as I expected but still more than I like, but I fully believe that's a flat-plate symptom.
|Nov 02, 2003, 10:27 PM|
i watched gene fly this little devil .... very impressive. really nice looking profile in the air, and it is so small - it is a hoot to watch.
|Nov 03, 2003, 08:02 AM|
Very cool Gene! What did your AUW come out at? I don't have depron do you think sturdiboard would work? Thanks.
|Nov 03, 2003, 08:25 AM|
GC: It came out at 3 1/8oz (89g) w/ a 2 cell ET250! The plans call for 5oz, so should be OK with Sturdiboard ro Readyboard.
jerbear is going to try it with FF, so we'll know more in a few days...
|Nov 03, 2003, 11:34 PM|
Well, I got in another very enjoyable flight thi morning I think I really like this little plane. I may tweak a few things and build another eventually...
The strangest thing happened, though. Basically, the same as yesterday, when jerbear was watching... Today, I switched to a 3x3 prop, and it flies much better, as expected. I think I have found the 'Terminal Velocity', though... Yesterday when I was trying a 3 cell 250 pack on the 3x2, I was flying right at myself, 10-15' off the ground, and picked it up to full throttle... I had been flying at half... Anyway, I thought I got a radio hit, but no I'm not sure...
So, fast forward to this morning... All was well in the world. I put the battery back a little further, and loops were much better. Anyway, I figured I'd check how it did on a dive, so I climbed up to 50-75' or so, and pointed it straight down... Naturally, I cranked the ailerons, since a dive isn't a dive, unless you're rolling ...
So, about 10' down, still 30-40' off the ground, the Twiglet exploded! I'm talking what appeared to be pieces everywhere! I thought enough to chop the throttle, and just stood there with my mouth open, while the 3 pieces just fluttered in the sky, eventually, after what had to be 5 seconds, but felt like a lifetime, I took the chuckling stroll of shame over to pick up the pieces...
It all snapped right back together, no damage!!! So, I launched it, and buzzed around myself on the walk back to the other side of the field...
I'm trying to determine what happened. Man I wish someone was shooting video. I'm going to have to try it again, you know I think, the force of the spin on the Vstab was enough to knock the top hatch off, and the wind going into the fuse popped the bottom hatch off. Heck, the battery didn't even come off the velcro. I'm not kidding. It just snapped back together!
|Nov 04, 2003, 09:15 AM|
Joined Jan 2003
I’m glad that you have taken a fancy for the Twiglet design, and like the depron interpretation along with Pierre’s a while back.
I flew two of my Twiglet’s for most of the (UK) summer, one powered by the GWS IPS S2 motor and a second powered by the PJS300 out-runner motor. The PJS powered model was by far the better and still achieved over 10 minutes of flight when using 2S 640mAH Li-poly’s and a 7x6” prop. I definitely recommend the PJS motor for this type of model.
Unfortunately my Twiglet’s have now been retired due to new projects. I have attached a few pictures for interest, and if anybody is interested a free plan is available via Reg Heath of www.modelflight.fsnet.co.uk .
Here’s a link to Twiglet on Reg’s site:
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Found plans for a Rafale in Depron||Pierre Audette||Foamies (Kits)||2||Jun 17, 2008 11:15 AM|
|He 162 Salamander in Depron||RubSon||Foamies (Kits)||4||Jan 08, 2003 01:49 PM|
|London calling Depron, come in Depron.||Steve Wrona||Foamies (Kits)||21||Nov 15, 2001 06:50 PM|
|Mounting GWS motor in Depron Planes||Rain City Flyer||Parkflyers||6||Sep 13, 2001 05:37 PM|
|:)Anyone made a B2 spirit in Depron?||broddarn||Foamies (Kits)||10||Jun 22, 2001 12:21 PM|