|Jul 30, 2012, 09:48 PM|
North Wales, PA, USA
Joined Jan 2001
Made a few key improvements. I replaced the GWS brushed motor with my Medusa 5300kv and swapped out the aileron servo from a Turnigy 4.4 to a Suppo 4.4. With a 2S 350mah lipo a GWS 3*3 prop turns 24.9k rpm at 9.6A. Not just unlimited vertical, it keeps accelerating straight up as far as I can see it. Seems faster than my sport wing, which I've clocked at 78mph using a GPS. I probably need to reduce the elevator throw; it's hard to keep a straight line at full throttle.
I bought the Suppo servo at an airshow this weekend. The housing is identical in shape and size to the Turnigy's. As it turned out, the gear train is quite different. It has a 60deg throw instead of the Turnigy's 90 deg. It also centers much better and seems to move more smoothly. In flight, the roll control is much more predictable. I won't be getting any more Turnigy's in the future, for sure.
Also attached a closeup of the unified pylon/spring hinge for the flying stab.
Max chord: 3"
Wing Area: 55 sq in (est.)
AUW Weight: 104g
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Walkera Devo 7 Software Update..RIPOFF Charging owners $34.77 to update||mescalinedream||Micro Helis||17||Apr 07, 2013 07:58 PM|
|Sold V-tail quad 400mm RXR!!! Updated added a flight controller!!updated price!||tc3wins||Aircraft - Electric - Multirotor (FS/W)||9||Jun 20, 2012 07:01 PM|
|Spinnaker name update/Tiger Mt. vid links updated||jbowne||Hand Launch||6||Jul 28, 2004 06:51 AM|
|Phx 60 just updated from CC needs software update to program with Phx Link??||JoeR||Castle Creations||4||Jul 16, 2004 08:53 AM|
|iRate Update Lipoly Update||frederm2002||Batteries and Chargers||62||Jan 29, 2004 03:31 PM|