|Dec 02, 2012, 10:28 AM|
United States, CO, Golden
Joined Aug 2011
Free CAM to combine with Inkscape?
I have been playing around a bit and am trying to keep things free. Inkscape is nice for drawing simple things out, but I have found the gcodetools plugin to be lacking and buggy. What I am hoping to do is two types of machining:
1) 2D cut outs. The problem with gcodetools is that it only can follow a path, so you have to design your path to account for the bit diameter. I want a cam program that can cut automatically calculate inside and outside cuts. Am I better off using a 3D model, even though I am making 2D parts?
2) pocketing: I'd like to both pocket and cut out a part. In inkscape, I am supposed to do this using the area tool in one layer and the path in the border. But, the area algorithm is really buggy, doesn't quite do it. Perhaps I can draw it there, and generate the gcode separately.
I have been a searching and see there is gsimple, glam, cam bam, etc. I just haven't had the time to try them out. Looking for any input I can get. BTW - I am looking to do design in Windows, but I am running my new machine with LinuxCNC.
|Dec 21, 2012, 09:37 PM|
Sketchup with the Sketchucam plugin (both free) devevloped for the Phlatprinter, unless you just have to have inkscape...
I have use Sketchup/Sketchucam with both my Phlatprinter and Sherline with no issues..
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion Combining DJI Wookong-M with mikrokopter power system, good idea?||Stef stuntpiloot||Multirotor Talk||9||Oct 17, 2012 10:02 AM|
|Discussion June Contest Combined With SSC||Dudley Dufort||Sacramento Valley Soaring Society||29||Jun 13, 2012 12:49 PM|
|Discussion Combine Warmism with Socialized Care...||MtnGoat||Life, The Universe, and Politics||7||Apr 05, 2012 07:54 PM|
|Discussion Can a RX battery be used in combination with a BEC?||twinster2||Power Systems||8||Mar 23, 2012 04:52 PM|
|Cool 100% vibration free mission with the BlackSky Cam mount||GoForBlackSky||Aerial Photography||15||May 26, 2005 02:01 PM|