|Dec 12, 2007, 04:01 PM|
Joined Feb 2007
Have just a quick question, does someone have full sheet plans for this plane? Also, dont you feel that the fuselage is too narrow?
|Apr 23, 2008, 04:16 PM|
I don't know if this is full size or not. See post #19
|Nov 16, 2008, 01:13 PM|
Joined Feb 2008
These look really well made and great fun!
Im *attempting* to build one, but im new to all this and need a little help.. This is a really silly question, but how do you keep the moving parts held on so they pivot (elevators etc).. do you just use sticky tape?
Its things like this I will struggle with. I then need to find some radio kit off ebay and need a few servos to go with it etc.
Also, can i use "all purpose wood glue" for sticking balsa to deplon? If not I have all purpose hot glue, but it looks heavy thick and messy...
Is it a case if "stick to the design as much as possible, but tweak it if you want" and it will probably still fly?
|Nov 21, 2008, 06:02 AM|
need some help here
i am building a funtana mini. and working on a real show string budet. i cant afford axi motors or himax.
but i found this site
would this motor fly the plane?
or would any of the combos there fly it? i would like to use the 25 amp esc
i could use all the help i can get
thanks in advance
|Nov 21, 2008, 08:04 AM|
That motor, is to powerfull, to heavy,en the torqeu is to much.
i have that motor...
this motor have 1600Rpm/volts, for 3D plane is that much...
i preverb to buy a motor @ 1000KV and for 1047 prop
i have this plane 3X build, 2 times with a robbe roxxy 2827-34, and thats awesome <half trottle @ hoover
1 time @ 90% mini funtana (rescale) with this motor:
Grtz from belgium
|Jun 11, 2009, 03:49 AM|
Joined Jun 2009
My Funtana Mini
I recently finished building my Funtana Mini and I am really pleased with how it turned out.
It has a JustGoFly U2212-15 (400 size 140W 940Kv) brushless outrunner and a Dynam 18Amp ESC in it.
I have been flying it with an 1800 mAh 3S Lipo. Performance is fantastic. I would like to get a smaller, lighter 3S lipo to further improve performance.
This is a great design. I had a lot of fun building it and am really enjoying flying it. Thanks Didier!
|Jun 01, 2011, 04:36 AM|
Joined Apr 2010
I want to show you next Funtana - from Poland this time.
(sorry, it's very old photo, from winter.)
4x 9g servo (HXT900)
Emax 2822 with 10x4,7 propeller
Turnigy plush 25A ESC
Turnigy 8ch receiver (from Turnigy 9X v2).
Weight: 410g. It flys GREAT!
To constructor: Well done!
|Feb 16, 2012, 06:48 PM|
I'd like to share with you the plans that were created at home.
Wing Span 1000mm.
All elements of the "Depron" 6mm, 6mm carbon tube spar.
I hope that these few changes will help build the model.
A short film as it happens
|Thread||Thread Starter||Forum||Replies||Last Post|
|Any tips on building my new Vortex CC?||WilliamSettle||High Performance||20||Aug 15, 2005 02:55 PM|
|One day I will actually start building my Silent Dream||ChrisP||Electric Plane Talk||5||Dec 11, 2001 04:48 AM|
|Need help building my first foam cut glider||Steven9026||Electric Sailplanes||8||Nov 21, 2001 09:17 PM|
|Building my first battery packs...||Gospadin||Sport Planes||4||Nov 15, 2001 10:17 AM|
|Building my own NIMH packs?||JayParke||Power Systems||5||Oct 17, 2001 10:18 PM|