HobbyKing.com New Products Flash Sale
View Poll Results: which color do you prefer ? for the spacers
Black 88 55.35%
Red 47 29.56%
Yellow 26 16.35%
White 6 3.77%
Blue 13 8.18%
Multiple Choice Poll. Voters: 159. You may not vote on this poll

Reply
Thread Tools
Old Oct 01, 2014, 10:26 AM
wait, there was a tree ?!?
moray's Avatar
Switzerland, ZH, Oberengstringen
Joined Jun 2012
251 Posts
New Product
ZMR250 - 3d printed Spacer Shop

05.11.2014 - IMPORTANT UPDATE

I won't accept any new orders at the moment. I'm finishing all present orders ofc

I'm creating a simple shop to have more control over the order and the order volume.
I will announce the shop as soon as its done ! 1-2 weeks.

This also allows me to upgrade my printer, not a new printer, but some upgraded parts.

THANK YOU




Dear ZMR250 fellows

I have to change my business model for the 3d printed spacers.
Until now, I made them on request in 3 different colors available [white, red, yellow].

I've sent out over 100 orders so far ! what started out as a simple offer in the ZMR250 Thread
to ship out a few 3d printed spacers, really got viral and I got flooded with orders (good and bad).

So to be able, to keep up the load, this is the new deal

Update 10.10.2014 . The Spacers also fit for the RCX H250CF-3K Frame by myrcmart.

Shipping 5 USD
- International Priority Shipping , takes 3-5 business days worldwide, no tracking.

Spacer Set 10 USD
- 4x 7mm Spacer, they give you 10.3mm clearance between the lower frame, they require M3-20mm bolts ( I only use 2 bolts per arm)
- 2x LED Holder, for LED's I use Turnigy High Density R/C LED Flexible Strip they are 8mm in height

Maximum 3 Sets per order
Otherwise Shipping Costs explode.. if you order 2 or more sets, you get a free "Ricola" bonbon as well

Color
The poll has spoken ; Black or Red ABS, from time to time I will also have Yellow in stock

Ordering
Drop me a pm, with Quantity, Color, Paypal email and Shipping Address, after that I will send out an invoice via paypal.

Weight
2x LED Holder 0.7g = 1.4g
4x Spacer 1.6g = 6.4g
printed at 0.15mm Z resolution

Warranty
Just in case you receive defective item, for example shipping damage, or a missing part (never happend so far !), please
let me know, I will send you a replacement for free.


printed in Switzerland !

Order Tracking :

COMPLETED ORDERS :
1.10.2014 - -rikybob - - 1 Set - - RED - - shipped !
2.10.2014 - - bmacster - - 1 Set - - BLACK - - shipped !
2.10.2014 - - jens.m - - 1 Set - - WHITE - - shipped !
4.10.2014 - - dazedfive - - 1 Set - - BLACK - - shipped !
4.10.2014 -- bernswong - - 1 Set - - RED -- shipped !
5.10.2014 -- bernswong - - 1 Set - - YELLOW -- shipped !
5.10.2014 -- nyx5 -- 1 Set - - YELLOW - - shipped !
6.10.2014 -- 1ofakind -- 1 Set -- WHITE -- shipped !
6.10.2014 -- naqz -- 1 Set -- RED -- shipped !
6.10.2014 -- punkindrublik -- 1 Set -- WHITE - - shipped !
6.10.2014 -- punkindrublik -- 1 Set -- YELLOW - shipped !
7.10.2014 -- Conradm -- 1 Set -- BLACK -- shipped !
8.10.2014 -- Captiva -- 1Set -- BLACK -- shipped !
9.10.2014 -- aliveathome - 1 Set -- BLACK -- shipped !
9.10.2014 -- bastar92 -- 1 Set -- BLACK -- shipped !
10.10.2014 -- benjamin_lau -- 1 Set -- YELLOW --shipped !
10.10.2014 -- JustinL -- 1 Set -- BLACK -- shipped !
11.10.2014 -- Louchooo -- 1 Set -- BLACK -- shipped !
11.10.2014 -- Batch1 -- 1 Set -- BLACK --shipped !
12.10.2014 -- Beav216 -- 1 Set BLACK -- shipped !
15.10.2014 -- Rook62 -- 2 Sets BLACK -- shipped !
15.10.2014 -- freemanhimself -- 1 Set -- BLACK -- shipped !
17.10.2014 -- zx6rrich -- 1 Set --BLACK -- shipped !
17.10.2014 -- Jam-ehz -- 2 Set -- BLACK -- shipped !
17.10.2014 -- headskull -- 1 Set -- BLACK -- shipped !
19.10.2014 -- zhesto -- 1 Set -- BLACK -- shipped !
19.10.2014 -- stevek1959 -- 1 Set -- White -- shipped !
19.10.2014 -- stevek1959 -- 1 Set -- Yellow -- shipped !
20.10.2014 -- ldonnay -- 1 Set -- BLACK -- shipped !
21.10.2014 -- ShaneH -- 1 Set -- RED -- shipped !
21.10.2014 -- Mattyt3g 1 Set -- BLACK -- shipped !
21.10.2014 -- Mattyt3g 1 Set -- RED -- shipped !
21.10.2014 -- Mattyt3g 1 Set -- YELLOW -- shipped !
22.10.2014 -- olivierb -- 2 Sets -- RED -- shipped !
24.10.2004 -- laterne -- 2 Sets -- RED & White -- shipped !
22.10.2014 -- brick69 - 3 Sets -- BLACK -- shipped !
24.10.2014 -- ccatalin -- 2 Sets -- BLACK & RED -- shipped !
24.10.2014 -- sandnessmj -- 2 Sets -- BLACK -- shipped !
25.10.2014 -- catman1 - 2 Sets -- BLACK & Red -- shipped !
25.10.2014 -- geronimoos -- 1 Set -- BLACK -- shipped !
25.10.2014 -- Diviner Gregg -- 1 SET-- BLACK -- shipped !
26.10.2014 -- don.of.flight -- 2 Sets -- BLACK -- shipped !
27.10.2014 -- TobiWanKenobi -- 2 Sets -- BLACK -- shipped !
27.10.2014 -- wayda -- 3 Sets -- BLACK & RED - YELLOW -- shipped !
27.10.2014 -- Seanbartsch -- 1 SET -- BLACK -- shipped !
27.10.2014 -- derek_s -- 2 SET -- yellow & white -- shipped !
27.10.2014 -- seanbartsch-- 1SET -- red -- shipped !
29.10.2014 -- robineche -- 2 Sets -- RED & YELLOW --
29.10.2014 -- sinthemau -- 1 Set -- YELLOW
29.10.2014 -- dogz85 -- 3 Sets -- Any Color --
31.10.2014 -- wyattroa -- 1 Set -- YELLOW + D4R Mount
30.10.2014 -- slappomatt -- 1 SET -- RED
02.11.2014 -- Alexluthor74 -- 2 Sets -- Yellow & Red
03.11.2014-- flashted -- 2 sets -- Yellow & Red
03.11.2014 -- Fragmike -- 2 sets -- Yellow & Red
03.11.2014 -- Steeze McQueen --1 sets -- Yellow
04.11.2014 -- pullup! -- 1 set -- RED
05.11.2014 -- Diaboloz -- 1 set -- BLACK
30.10.2014 -- Rook62 -- D4R Mount BLACK 2x , 1x gimbal
29.10.2014 -- FLDataTeK -- REVIEW Bundle
04.11.2014 -- Kahnx -- 4 -- Fluorescent Yellow
30.10.2014 -- Fun4All -- 2 -- RED & Orange
14.11.2014 -- enorloz -- 1 Set, Fluorescent Giveaway Promo
14.11.2014 -- aknaku -- 1 set red
04.11.2014 -- Jefte -- 1 -- BLACK--
04.11.2014 -- Schtubb -- 2 -- BLACK & Orange--

ALL PENDING ORDERS :
aldenyuan 1 set black

GIMBAL



If you have your own 3d printer or access to one, feel free to print them yourself, here are the STL files shared:
led_holder.stl
lowerframe_spacer (7mm).stl
moray is offline Find More Posts by moray
Last edited by moray; Jan 09, 2015 at 01:30 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old Oct 01, 2014, 10:32 AM
wait, there was a tree ?!?
moray's Avatar
Switzerland, ZH, Oberengstringen
Joined Jun 2012
251 Posts
UPDATE 23.10.2014

The last 10 orders, got the tilted prototype mounts for free !
Next round is for the 10 testers who signed up for testing.

UPDATE 16.10.2014


I'm the process of designing tbs gemini style angled motor mounts

Regarding the 3d printed angled motor mounts, as soon as I will have them ready next week, I will make an offer to send out 10 samples nearly for free (only shipment costs), 1 sample per person and first comes first served.

Also if you order a set of my "ordinary" spacers , the first 10 people will get angled motor mounts for free as well.

I hope to get some nice feedback and community support back this way, to further improve the angled motor spacers, if needed

color is fixed, they will be black, to begin with.

OFFER IS VALID FROM NOW ON, just post in THIS thread, that YOU want to be a Tester. Maximum of 10 people !

if they perform well, I will make a new bundle for frame spacers and angled motor spacers in the future.

Last but not least, I want to shout out a big thanks to all previous and hopefully future customers for their support !


Prototype Tester List :
1. bulesz
2. conradm - sent
3. txsio - sent
4. Rand__
5. AC5FF
6. TIM JC
7. freemanhimself - sent
8. howlrunner
9. ccatalin - sent
10. headskull - sent

Big Credit, to Shrediquette, TBS, and Forum Member KyleG who inspired me by their designs
moray is offline Find More Posts by moray
Last edited by moray; Nov 06, 2014 at 02:38 PM.
Reply With Quote
Old Oct 01, 2014, 10:43 AM
Registered User
Conradm's Avatar
Joined Jul 2014
1,392 Posts
Black please!
Conradm is online now Find More Posts by Conradm
Reply With Quote
Old Oct 01, 2014, 10:59 AM
Registered User
Isle of Man
Joined Apr 2012
1,215 Posts
Thanks again for doing this Moray, really good of you to offer these to the community.

Really appreciate you sharing the design and with a 3d printer myself, I know your your prices (shipping too) are very good.

With these spacers, the new power dist. board from overdraft, the ZMR250 is one of the best bang for buck around and the community driven mods have really improved it.

Top bloke !
jhkiom is online now Find More Posts by jhkiom
Reply With Quote
Old Oct 01, 2014, 11:11 AM
ModifiedRC Guru
FLDataTeK's Avatar
United States, FL, Jacksonville
Joined Dec 2013
1,439 Posts
Moray is the man... Very fast shipper too..

Here is a little taste of what his spacers look like.











FLDataTeK is offline Find More Posts by FLDataTeK
Last edited by FLDataTeK; Oct 01, 2014 at 11:27 AM.
Reply With Quote
Old Oct 01, 2014, 11:17 AM
Registered User
Belgium, Flanders, Bruges
Joined Oct 2014
7 Posts
Quote:
Originally Posted by Conradm View Post
Black please!
+1 on the black
Djonah Inc. is offline Find More Posts by Djonah Inc.
Reply With Quote
Old Oct 01, 2014, 02:06 PM
Registered User
jens.m's Avatar
Sweden
Joined Jul 2013
65 Posts
Fixed the frame, I took one of the legs and broke it in half and use that as support, then I epoxy it together. It even took a new crash today.

Those spacers looks interesting. How safe is it the ESCs between the plates, heat wise?
jens.m is online now Find More Posts by jens.m
Reply With Quote
Old Oct 01, 2014, 02:10 PM
Registered User
Conradm's Avatar
Joined Jul 2014
1,392 Posts
Quote:
Originally Posted by jens.m View Post
Fixed the frame, I took one of the legs and broke it in half and use that as support, then I epoxy it together. It even took a new crash today.

Those spacers looks interesting. How safe is it the ESCs between the plates, heat wise?
My ESC's stay nice and cool.

Adding a pic of my build with Moray's spacer kit. Although now I want a set in black.
Conradm is online now Find More Posts by Conradm
Reply With Quote
Old Oct 01, 2014, 02:12 PM
ModifiedRC Guru
FLDataTeK's Avatar
United States, FL, Jacksonville
Joined Dec 2013
1,439 Posts
Quote:
Originally Posted by jens.m View Post
Fixed the frame, I took one of the legs and broke it in half and use that as support, then I epoxy it together. It even took a new crash today.

Those spacers looks interesting. How safe is it the ESCs between the plates, heat wise?
I have not had any heat issues so far.

But I will warn you now.. Its PITA to put them in there.. Not a lot of room to work in. When I rebuild I'll probably move the ESC's back out on the arms.
FLDataTeK is offline Find More Posts by FLDataTeK
Reply With Quote
Old Oct 01, 2014, 02:20 PM
wait, there was a tree ?!?
moray's Avatar
Switzerland, ZH, Oberengstringen
Joined Jun 2012
251 Posts
yeah not a lot of space, but you can place a small power distribution board between the board with the spacers, makes wiring very easy and clean, also the LEDs look cool and help for orientation.

KISS12a esc would be perfect, but pricey
moray is offline Find More Posts by moray
Reply With Quote
Old Oct 01, 2014, 02:20 PM
Registered User
Conradm's Avatar
Joined Jul 2014
1,392 Posts
I thought it was fairly simple. I just used double-sided tape to hold them in place while I assembled the bottom plates.
Conradm is online now Find More Posts by Conradm
Reply With Quote
Old Oct 01, 2014, 02:28 PM
ModifiedRC Guru
FLDataTeK's Avatar
United States, FL, Jacksonville
Joined Dec 2013
1,439 Posts
Quote:
Originally Posted by Conradm View Post
I thought it was fairly simple. I just used double-sided tape to hold them in place while I assembled the bottom plates.
I was talking more from a wiring perspective. I guess it also depends what ESC's you are using also.
FLDataTeK is offline Find More Posts by FLDataTeK
Reply With Quote
Old Oct 01, 2014, 02:31 PM
Registered User
Conradm's Avatar
Joined Jul 2014
1,392 Posts
Quote:
Originally Posted by FLDataTeK View Post
I was talking more from a wiring perspective. I guess it also depends what ESC's you are using also.
Oh gotcha. Did you use a PDB? I wired my ESC's to my motors before installed any of it so all I had to do was tie everything into the PDB.
Conradm is online now Find More Posts by Conradm
Reply With Quote
Old Oct 01, 2014, 03:01 PM
ModifiedRC Guru
FLDataTeK's Avatar
United States, FL, Jacksonville
Joined Dec 2013
1,439 Posts
Quote:
Originally Posted by Conradm View Post
Oh gotcha. Did you use a PDB? I wired my ESC's to my motors before installed any of it so all I had to do was tie everything into the PDB.
Nope I made a wiring harness instead of using a PDB.
FLDataTeK is offline Find More Posts by FLDataTeK
Reply With Quote
Old Oct 01, 2014, 03:11 PM
Registered User
bulesz's Avatar
Hungary EU
Joined May 2007
2,961 Posts
Yoman,

If I were you I would make fluorescent green, orange and blacks...

Great spacers thanks again, helped a lot!

Sorry for the crap photo...
bulesz is offline Find More Posts by bulesz
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Building a 3D printed motor Opie818 Electric Motor Design and Construction 21 Oct 25, 2013 04:04 PM
Build Log 9D- the 3D printed 3D plane sqrt18 3D Flying 17 Oct 20, 2013 02:04 AM
Discussion Wild stuff made with 3D printing dll932 Life, The Universe, and Politics 8 Sep 28, 2013 12:03 AM
New Product New 3d printed PZ0420 case philthyy FPV Talk 1 Sep 22, 2013 12:06 AM
Question 3D Printing / 2D Metal cutting Jesterbaze Multirotor Talk 1 Sep 19, 2013 09:32 PM