And I'm using F-30As, not yet received them. I'll flash them with simonK f/w.
Thanks TS00.
Vineet

Originally Posted by vineet_p

And I'm using F-30As, not yet received them. I'll flash them with simonK f/w.

They should work very well.

We want video!

Thanks TS00. I can't wait to start building it, but HK.....!

You want these for 4S:

http://www.hobbyking.com/hobbyking/s...50kv_140w.html

And 30amp ESCs are a tad big. I get away with 12amp plush using 4S no probs.

But if I use 750kvs, I'll need larger props spinning at low rpm = slow and sluggish quad = no fun.

A quick question: NTM 2826 1200kv + 9047 props + F-20A (20A ESCs) (on a 4s)

Is this a good setup? Will the draw be less than 20A or do you suggest me to go for 30A?
Thanks!

That's a fast motor, a big prop, and a little ESC

Should be fine with 8045, or with a 1000kv motor, or with a 30A ESC.

Edit: I just noticed the 4S - I think that quad will be devilishly hard to fly.

Originally Posted by TS00

That's a fast motor, a big prop, and a little ESC

Should be fine with 8045, or with a 1000kv motor, or with a 30A ESC.

Edit: I just noticed the 4S - I think that quad will be devilishly hard to fly.

Thanks for the reply.

I will then buy the F-30As. (they're on backorder and it seems HK is not interested in restokcing).

I'll first learn to fly with a 3s, then upgrade to 4s.

Originally Posted by vineet_p

Thanks for the reply.

I will then buy the F-30As. (they're on backorder and it seems HK is not interested in restokcing).

I'll first learn to fly with a 3s, then upgrade to 4s.

Turnigy Plush 30A or Skywalkers would also work pretty well. These 40A monsters are very well priced:

http://www.ebay.co.uk/itm/4-x-Hobbyw...item4d01772043

Just for reference NTM motors 10x4.5 3s 30A BlueSeries no SimonK.
AUW around 1.6 kg with 2x 2200 3s, tested with 2x 2200 3s + GoPro

X666 + KK2 having fun on windy day (11 min 35 sec)

Like this motors.

Originally Posted by vineet_p

I ordered NTM 2826 1200kv and 9047 props. Will use a 4s LiPo, AUW will be around 1200-1300g.
Will post results. Thank you all!

that setup will be a rocket my fpv quad's AUW is 1250grams, and i use the same motors on 3s lipo with 8x4.5 carbonfiber props, and it hovers at %40 throttle easily. even on my setup 4s makes my quad much more powerful

you are going to have a great time with it

PS: don not use simonk firmware with ntm 2826-1200kv motors, there are a lot of threads of this problem.i had alot of crashes until i found out that the problem was the simonk firmware timing issue.Use the wii-esc code, believe me, i am on your side

If you run 4S..... a really good motor is this.. 3020-600kv.... $20...

http://www.hobbypartz.com/86mb96-3020-600kv.html

It spins a APC 12x3.8 on my tri with 11000 mah... my friend has the 950 version.... does not
work as well and can only use 10" props

I have tried all kind of different motors and props.... 600kv on 4S and 12" props is in the sweet spot.

my tri can fly for 20 min or lift 2.5 lbs and fly around...

Don't try to guess on motors props and KV.... use what works for someone else... there are too many combos

Tri-Copter Bucket Race.... APM2 2.7.1 (0 min 15 sec)

Hi! Im using the ntm prop drive 2826 1000kv motor on my hexa (clone f550). Auw is 2.6 kg. including the battery, gopro+gimbal, landing gear. The motor runs hot after 4mins flight. Is this normal? I've used 10x4.5 and 9x6 props and get same results. Is my setup too heavy for this motor?

hah i see you wrote there too

so someone says that 10x4.7 gives 930g thrust @ ~15A so thats plenty under the 21A max. 930 x 6 = 5580g max thrust and half that is 2790g (max weight of the multi for good stability) and you are under that, so id think it would be fine.

could you take something heavy off (gimble?) and see if it is any cooler (to rule out weight, or not)?

is it really hot out? do motors sound bad ( add a little oil to lub them maybe), is the heat progressively growing, or immediate?

Actually, it will get heavier once i get my 4500mah pack. I haven't tried to do the 2min test, but i'm just worrying if im pushing the motor to its limit. I dont have a temp gauge so i cant tell how hot is hot. Im thinking around 60º celsius?

I'll try to put it into more diet. Maybe i'm still missing something.

What do you mean progressively growing? Actually it becomes hot after 2 secs right after flight