Originally Posted by vronny

How to install your servo back should be in manual on which port they go in.

Thanks for advice.

I think should be on manual page 11 & 12!

I will try it...

What size are the master cp ball links, same as those used on regular 450's?
Im looking for any way to get my master cp back up in the air as all its missing is a blade grip ball link.

Im getting annoyed with my order from banggood that still hasnt arrived yet (it was sent the 13'th).

Originally Posted by Xermalk

What size are the master cp ball links, same as those used on regular 450's?
Im looking for any way to get my master cp back up in the air as all its missing is a blade grip ball link.

Im getting annoyed with my order from banggood that still hasnt arrived yet (it was sent the 13'th).

You can order from here as well:

http://www.chinesejade.com/walkeraMasterCP.htm

Originally Posted by nelsonlee

You can order from here as well:

http://www.chinesejade.com/walkeraMasterCP.htm

Thats still going to take ~2 weeks to reach me, iv been grounded for nearly a month now. *tears hair in frustration*

If ican find a trex ball link that would fit the master i could shorten the metal arm untill it fits, and then thread lock/ca it to the rod for now.
And then swap to a propper one when my 3 sets of spare link arms arrive.

Its one single ball link arm .

Originally Posted by Xermalk

Thats still going to take ~2 weeks to reach me, iv been grounded for nearly a month now. *tears hair in frustration*

If ican find a trex ball link that would fit the master i could shorten the metal arm untill it fits, and then thread lock/ca it to the rod for now.
And then swap to a propper one when my 3 sets of spare link arms arrive.

Its one single ball link arm .

3.75mm. Tiger Thunder mini titan uses the same size if you have a LHS that sells their products.

Originally Posted by BThirsk

3.75mm. Tiger Thunder mini titan uses the same size if you have a LHS that sells their products.

Are you positive that the arms would fit? If so ill buy a set. But darn the e325 spare parts are pricey, a swash is 76 usd without shipping fees. The ball links + rods are 18 usd. Thats insane for the cost needed to produce some thin metal rods and plastic.

Edit, my banggood order finally showed up in Sweden. So i should be getting it around Tuesday.

Originally Posted by Xermalk

Are you positive that the arms would fit? If so ill buy a set. But darn the e325 spare parts are pricey, a swash is 76 usd without shipping fees. The ball links + rods are 18 usd. Thats insane for the cost needed to produce some thin metal rods and plastic.

Edit, my banggood order finally showed up in Sweden. So i should be getting it around Tuesday.

Don't fill bad I have been waiting for a heli that sitting in custom since the 11/28 an the bad thing about it is I pass the airport everyday going to work so I no what you mean. The parts will arrive before I get the heli. p.s I waited more than 10 days for parts that came from US which is crazy usually takes 3 days at the most. Christmas time the mail is really slow.

Originally Posted by Xermalk

Are you positive that the arms would fit? If so ill buy a set. But darn the e325 spare parts are pricey, a swash is 76 usd without shipping fees. The ball links + rods are 18 usd. Thats insane for the cost needed to produce some thin metal rods and plastic.

Edit, my banggood order finally showed up in Sweden. So i should be getting it around Tuesday.

All I have used are the plastic ball links and balls for another project. They were cheap from a US supplier. I just went and measured this morning and they are the same 3.75mm. Glad your are there so you don't need to source the other ones.

Originally Posted by Xermalk

These should need no modification what so ever.

"The master cp metal gear servo will be available on 12th Dec. , next Wed." - one01

http://www.hobbyone.com.hk/cn/product.jsp?id=11348

Has anyone checked out their shipping charges? I was about to place an order for some spare blades and a couple of the new servos but after finding the shipping charges I'm waiting for someone with their feet on the ground to order from. These guys are crazy!

-bob

Originally Posted by bobthenuke

Has anyone checked out their shipping charges? I was about to place an order for some spare blades and a couple of the new servos but after finding the shipping charges I'm waiting for someone with their feet on the ground to order from. These guys are crazy!

-bob

I ordered 3 servos from them several days ago and the shipping was $15.60. That's not too bad considering they ship fast and you get the product in less than 2 weeks and they will actually have the product.
I had several orders from another Vendor with free shipping. One order took 60 days to arrive and the other took 48 days. My time is worth more than $15.00.

Are we done with the Master CP questions and feedback document? if so ill ask tom_z to send it in.

Originally Posted by BThirsk

I ordered 3 servos from them several days ago and the shipping was $15.60. That's not too bad considering they ship fast and you get the product in less than 2 weeks and they will actually have the product.
I had several orders from another Vendor with free shipping. One order took 60 days to arrive and the other took 48 days. My time is worth more than $15.00.

I was ordering 3 servos, 2 sets of blades, and couple of little LiPos for my Mini CP, and an extra main and tail motor and the shipping was >$21 for HK shipping. I think that even HK would blush if they charged that much.

My time is easily worth as much as yours, but I'll wait an extra week and spend the shipping money on something else. If I were desperate and they were the only game in town I would probably go for it, but their low prices are more than made up for in shipping charges. There are others out there with a blanket charge of $5 or so or free shipping and they probably don't take any longer to ship than these guys. I know that from personal experience. If enough of us complained they'd lower the shipping prices. Is it not possible that us non-Asians are being ripped off? Nahhh, they love us.

Hey Guys,

Just a heads-up; I'm selling my whole set-up here: (All NIB)

http://www.rcgroups.com/forums/showt...9#post23484857

1x Master CP Heli

6x Servos

6x Zippy Compact Batts 1,000mah/3S/35C

3x Main Gear

all $180 + shipping (I'm in the U.S.)

Pretty much all you need to get started - the Tx

Thanks,

-Pat

I got my last parts from chinese jade and shipping was 5 dollars to the us . I had my parts in less than 2 weeks .

Originally Posted by bobthenuke

Has anyone checked out their shipping charges? I was about to place an order for some spare blades and a couple of the new servos but after finding the shipping charges I'm waiting for someone with their feet on the ground to order from. These guys are crazy!

-bob

Yo Bobo, I was going to get a Master c/p from them as they had a good price. They wanted over $50.00 to ship it, naw no thankls. They can keep what ever they have. I guess they do not see what others offer and how much. They will not be around long unles they don't much care.