|Apr 16, 2011, 01:46 PM|
Joined Dec 2005
EDF 64mm FFF Jet
Here is the start to my EDF Jet. I need to add wings yet and figure out if I'm going to do Aileron/Elev or just Elevon style like a flying wing. Specs are as follows:
Electrifly 4Ch Rx
Turnigy 25A Speed Control
Turnigy 2810 EDF Outrunner 3300Kv Motor
64mm Ducted Fan
HS-55 Servos (eventually)
1500mah Lipo, 20C, 3S
Don't know AUW yet, I'm thinking around 13oz (its at 10.1 right now with no wings or servos)
I need some kind of wing shape idea.
This thing can scoot itself fast across the wood floor. Its gonna be fast I hope. I shaped the body around 3 small 3" diameter soup cans and tapered the back end down to about 2" in diameter. This thing can move some air now! Before I had just put the EDF on a flying wing and it was ok but now with the taper its amazing.
Any suggestions before I finish this thing? I still need to find the cog once the wings are done but right now its about 5.5" from the front.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Article NitroPlanes and Exceed RC's F-35 64mm EDF RC Jet Review||78dave||Foamy EDFs||193||Jul 27, 2011 11:47 PM|
|Mini-Review Art-Tech's Black EF2000 Eurofighter Typhoon 64mm EDF RC Jet w/ FPV-CAM by NightFlyyer||nitroplanes||Nitro Planes||1||Aug 04, 2009 05:03 PM|
|New Product Exceed RC F/A-18E Tiger 64mm EDF Jet||nitroplanes||Nitro Planes||31||Apr 03, 2009 02:07 PM|
|Mini-Review Exceed RC F-4E Phantom 64mm EDF RC Jet Reviewed by NightFlyyer||nitroplanes||Nitro Planes||0||Dec 17, 2008 05:41 AM|
|Discussion best 55/64mm "real" jet edf for pure speed?||STANG KILLA SS||Foamy EDFs||4||Oct 27, 2008 09:12 AM|