|Aug 15, 2012, 09:16 AM|
easy question cant seem to find an answer --right conector for my foxtech vtx and rtx
Hi guys i recently got the 200mw 5.8ghz
And im plannnig to build my own cloverleaf antenna later, but mean while i want to get a premade one, but dunno which one to get the SMA conector or the RP-SMA
BEV 5.8G cloverleaf antenna set(SMA right angle connector)
BEV 5.8G cloverleaf antenna set(RP-SMA)
at 19dls its very tempting are they any good??? any input is welcome
|Aug 15, 2012, 01:50 PM|
by any chance do you know if this antennas are any good?????
also when i decided to buy this setup from foxtech i did after sporadic threads talking it was a decent setup, but cant find a good review or dedicated thread for this foxtech combo
can any of you help me out, i tried search but is just a bunch of sales and the sporadic comment about the combo nothing specific
|Aug 17, 2012, 03:19 PM|
The transmitter and receiver is surprizingly good. With propper antennas you can fly out to 10km with this setup without too much hazzle.
Run the receiver off a 2s battery though as the linear voltage regulator in there get's pretty hot when driven with a 3s battery.
I don't like the power connector of the transmitter too much as the one I have has a flakey contact. I would solder the wires directly onto the PCB to be save. Other than this the product is good. The alternative would be the 600mW ImmersionRC setup, but that's more power (alas more current draw) and does not mean more range as the rx of the FoxTech setup is said to have a higher sensitivity. Wether this is really true or not remains a topic of ongoing discussions, but fact is that the maximum ranges achvied with both systems hovers about the same (~15km).
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Need help finding an fpv system for my Blade MQX||Beeler19||FPV Talk||2||Apr 07, 2013 09:56 AM|
|Idea||Newbee Forum- A Place for Many Questions and Very Few Right Answers||dr.E||Bergen County Silent Fliers||7||Apr 23, 2012 10:50 PM|
|Discussion||Battery discharge when flying question, I don't get it. Anyone have an answer please||jasper7821||Batteries and Chargers||7||Apr 16, 2012 05:45 PM|
|Discussion||Vapor issues and cant find an answer||Lamborghini12345||Scratchbuilt Indoor and Micro Models||10||Feb 22, 2012 08:58 AM|
|Discussion||Cant seem to find an answer to this: PBII question||RightcoastRC||Foamies (Scratchbuilt)||6||Nov 13, 2010 12:37 AM|