anyone know of an F3P suitable ESC that comes with connector for AR6300?

I just bought some connectors and soldered them to my existing controllers.

JST ZH servo lead

Much cheaper from HK

BTW, I've moved over to FrSky so my AR6300's are for sale at a rediculously cheap price if anyone is interested - link to for sale section.

Mike

Getting tired of cutting the shrink wrap off ESCs and changing wires....and paying $10 shipping to order $1.00 worth of connectors...have a few on hand and 20 more coming from HK

good luck selling your 6300s Mike, but I paid $8 each for my receivers so thats not very appealing since they seem to work 100% despite the urban legends

This is the only one I know about. It's the motor/esc unit I recommend for the Vision 3d.

In fact the first one that I used didn't have the AR6300 connector wire in it but the 2 most recent ones did.

I actually drew out a modified motor mount for the Vision 3d to accommodate the built in esc and make it easier to mount flush. It comes with little bushings that you can use to accomplish the same thing too.

If you want to use another esc and you don't want to wait for overseas ship times bphobbies sells these:
http://www.bphobbies.com/view.asp?id...22&pid=V547613

Thanks Dom, I'm probably wrong but seems to me the DualSky offering are just a little too small and a little too large. I'm no doubt a little gun shy as I tend to underpower my planes then regret my gram pinching that lead to to underpowering. Just build an AITO and was sorely hacked off that it wouldn't come close to holding a hover but lucked out when I bought some 65C batteries which transformed it into a vertical monster. Obviously too much voltage drop with 25C paks...
anyway I have a couple motors I hope will do the job..failing that, I'll try a Dualsky.
I already have a small stock of AR6300 plugs so I'll be swapping them I guess and lots more coming. Same thing with servos.. have a nice 4g Digital for Vision ailerons but its std plug so
I have to convert.
Got a lesson last night in why I prefer not to sway...was connecting a 2g brushless to AR6400 style brick and the soldiering iron touched a gear...now have to order a $6 servo from HK just to steal the gear. A small loss but big hassle

Originally Posted by crossup

anyone know of an F3P suitable ESC that comes with connector for AR6300?

Hi Crossup,

The CC ThunderBird 6 Nano-lite version fits the AR6300.

Free

Thanks, first I've heard of that one, I'll be checking it out as I have 4 6300s

Originally Posted by Free

Hi Crossup,

The CC ThunderBird 6 Nano-lite version fits the AR6300.

Free

Originally Posted by crossup

anyone know of an F3P suitable ESC that comes with connector for AR6300?

One of these may help - http://www.rc-connectors.com/index.p...index&cPath=78

Or if you're really trying to save weight but don't have the tools to replace the connector yourself, then I'll replace it for you:

http://www.rc-connectors.com/index.p...roducts_id=312

Glenn
RC-Connectors.com

Not needed, I have a bag full of 1.5mm JST, digital soldering station and now a Unitron stereo zoom microscrope, just looking for the easy way out.
HOWEVER, will be checking your site out as I'm tired of paying big dollars for nano connectors when I know they cost pennies. Just saw MicroFlyer(Nick L's site) showing $8 each OMG, his gear etc is worth the prices but only way that connector price makes sense is if he's paying 10x too much

Originally Posted by glenn2626

Or if you're really trying to save weight but don't have the tools to replace the connector yourself, then I'll replace it for you:

http://www.rc-connectors.com/index.p...roducts_id=312

Glenn
RC-Connectors.com