Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Mar 28, 2002, 01:38 AM
Richard ll is offline
Find More Posts by Richard ll
Fe Fi Fo Fum
Richard ll's Avatar
Useless Loop, Australia
Joined Apr 2001
1,302 Posts
Metal to metal interference?

Hi Guys,
I am building a Fieseler Storch which has very long spindly undercarriage. The plans call for aluminium tubing to slide inside another al tube as the main leg,using neoprene tubing as a damper. As an option I have found a carbon fibre rod (from a kite) that fits nicely into 6mm aluminium tubing.
Problem is this guy in a hobby store I was visiting yesterday says if I just let aluminium rub on aluminium (or carbon),my plane will suffer from interference and crash.
When I raced rc cars we used to have problems with arials rubbing on carbon fibre chassis and causing interference but I cant see how something not directly connected to the receiver/controller circuit could cause problems?
Anyone with ideas or experience with this?
cheers Rich
Richard ll is offline Find More Posts by Richard ll
Reply With Quote
Sign up now
to remove ads between posts
Old Mar 28, 2002, 08:20 AM
Bill Glover is online now
Find More Posts by Bill Glover
Registered User
Bill Glover's Avatar
United Kingdom, Bracknell
Joined Nov 2000
13,906 Posts
A long metal rod sliding inside a tube won't be a problem as it'll be impossible for them to make and break contact (which is what causes the noise - not rubbing) ... unless the tube is WAY too big!

The classic source of electrical noise is a metal clevis on a metal throttle arm on an IC motor, particularly if the hole for the clevis pin is a little oversize. Many manufacturers use plastic arms on their carbs now but with metal arms I always use a plastic clevis.
Bill Glover is online now Find More Posts by Bill Glover
Reply With Quote

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Metal Spinner Interference ?? Jimmy_H Electric Plane Talk 8 Jul 23, 2007 12:44 PM
Metal-to-metal RF interference leccyflyer Modeling Science 16 Jul 08, 2005 03:09 PM
Gluing metal to metal Norm35 Parkflyers 10 Nov 16, 2004 12:38 PM
Bonding metal to metal? DennisG Electric Plane Talk 7 Dec 20, 2002 12:18 PM