Anyone with experience on the s800 Zenmuse GH2 combo? I am getting alot of jello on my video? could be shutter speed? anyone wanna share settings that are proven to work?

what did you used as settings on the camera? F/? ISO? Speed?

Originally Posted by semich

what did you used as settings on the camera? F/? ISO? Speed?

Auto ISO and AWB, speed 1/100

probably the reason! ISO set manually to 100 (to start), Speed max 80! min 20.. manual White balance. Check pag 10 of latest zenmuse manual.

Originally Posted by Paul@SCC

Time lapse from DJI.
http://vimeo.com/53196308

It is great to hear that they have fixed this issue and have flown for 72 hours non-stop but am I the only one who cannot figure out what they mean when they tell us to visit "goo.gl/syn3F" ??? I have no idea what this means. Is this supposed to be a website? Anyone?

Originally Posted by semich

probably the reason! ISO set manually to 100 (to start), Speed max 80! min 20.. manual White balance. Check pag 10 of latest zenmuse manual.

Obrigado Semich

rancherpete http://www.dji-innovations.com/compass/submit_rma/

It was supposed to be a short link but got expired some how...

Originally Posted by semich

rancherpete http://www.dji-innovations.com/compass/submit_rma/

It was supposed to be a short link but got expired some how...

Thanks for the explanation of this. Your links worked so I will dig into this. Have a great day, I appreciate the help.

Originally Posted by semich

rancherpete http://www.dji-innovations.com/compass/submit_rma/

It was supposed to be a short link but got expired some how...

By the way (and I'm sorry if this is off-topic) What is the bottom line on the later FW revisions for the WK-M? Has the latest one proven to be completely safe and reliable? I have an S800 presently with 5.12 FW and I have been apprehensive to upgrade. However I do have the older GPS so I guess the FOD would not apply to me and this may have been part of the reason that some guys held off on updating, worrying that the newer FW may contribute to the FOD.

Many of us are using 5.14, per recomendation of DJI and so far so good! S800 it is.

Originally Posted by semich

Many of us are using 5.14, per recomendation of DJI and so far so good! S800 it is.

Okay, thanks. My S800 has been doing pretty well with the original 5.12 so I was afraid to upset things. I did hear that there were supposed to be some improvements with 5.14... like better stability with one motor out like TahoeEd said, not sure what else there may be but I'll dig into it.

Originally Posted by rancherpete

By the way (and I'm sorry if this is off-topic) What is the bottom line on the later FW revisions for the WK-M? Has the latest one proven to be completely safe and reliable? I have an S800 presently with 5.12 FW and I have been apprehensive to upgrade. However I do have the older GPS so I guess the FOD would not apply to me and this may have been part of the reason that some guys held off on updating, worrying that the newer FW may contribute to the FOD.

I am flying an Octo on 5.14 with old GPS and an S800 on 5.14 with new GPS so far no problems.. Only a couple of flights with the S800 but more than 20 with the Octo...

If one motor stop, the hexa will start to spin and it will be very hard to control anything less up and down. With the FW, you can switch to Home Lock or Course lock and drive it like in normal mode, still while spinning due the GPS capacity (of course GPS must have enought signal ). I did saw it more stable in a windy day, I use the default gains.

Originally Posted by Aviator1

I am flying an Octo on 5.14 with old GPS and an S800 on 5.14 with new GPS so far no problems.. Only a couple of flights with the S800 but more than 20 with the Octo...

Thanks, I will give it a try and update today. This will give me something productive to do today and keep me out of the strip-bars and crack-dens Although the day is young so if the update goes smoothly...

I would trade the upgrading with the strip in no time!