|Aug 26, 2006, 10:19 AM|
the scene of the crash
Joined Mar 2005
help with tail wag in my trex
my trex has tail wag that is consistantley left to right about 1 foot i have not changed the gyro or tx settings. i bought it used and it flew like a champ after a few crashes 6 to be precise the tail wags i have no vibrations what so ever in the head assembly and i am using a gy240 for the gyro please help me.
|Aug 26, 2006, 07:07 PM|
Joined Jul 2006
Maybe thru one of the rebuilds the rudder linkage was connected to the servo further from it. This would cause more reaction from the gyro than it did before. Try to move the linkage where it is connected to the server closer to it. I think the expresion is shorten the horn. You may want to check travel on the linkage too. Any adjustments to the tail make sure the linkage isn't binding back there. It would be eisier to try to drop the % on the gyro and see if that helps before getting into mechanical stuff.
|Aug 26, 2006, 07:59 PM|
Make sure all the tail grips are tight!
Tail rotors are tracking.
Boom is straight and rotors spin nice and perpindicular to the main rotors.
Tail shaft is straight.
Tail shaft is not sloppy in the bearing.
Tail slider may have excessive slop in it.
Just a few thoughts.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Gingling Noise in my Trex 450SA Tail||Dan_eflyer||Mini Helis||10||Apr 14, 2007 11:44 AM|
|Discussion||Help with tail wag?||cubaneight||Mini Helis||12||Oct 30, 2006 08:58 AM|
|Help!||Need a little help with tail wag....||Wren1702||Mini Helis||8||May 14, 2006 11:08 PM|
|Need help with the tail pulley/gear on Trex||Swilson50||Mini Helis||0||Oct 09, 2005 09:15 PM|
|Little help with the WAA WAA in my raptor||lilhoss||Fuel Heli Talk||2||Jan 03, 2005 06:04 PM|